Development of a new test rig for the analysis of hydrodynamic bearings for rotors of microGT

Carlo Alberto Niccolini Marmont Du Haut Champ; Fabrizio Stefani; Paolo Silvestri

doi:10.1051/e3sconf/201911303002

All issues

Volume 113 (2019)

E3S Web Conf., 113 (2019) 03002

References

Open Access

Issue		E3S Web Conf. Volume 113, 2019 SUPEHR19 SUstainable PolyEnergy generation and HaRvesting Volume 1


Article Number		03002
Number of page(s)		9
Section		Energy Micropolygeneration and Harvesting
DOI		https://doi.org/10.1051/e3sconf/201911303002
Published online		21 August 2019

J. Tůma, J. Biloš, Fluid Induced Instability of Rotor Systems with Journal Bearings, Eng. Mechanics, 14, 1-2, 69–80 (2007) [Google Scholar]
V. Meruane, Identification of nonlinear dynamic coefficients in plain journal bearings, Trib. Int., 41, 8, 743–754 (2008) [CrossRef] [Google Scholar]
M.L. Ferrari, A. Traverso, A.F. Massardo, Smart polygeneration grids: Experimental performance curves of different prime movers, Applied Energy, 162, 622–630 (2016) [Google Scholar]
J. Tůma, A. Bilošová, J. Šimek, R. Svoboda, A Simulation Study of the Rotor Vibration in a Journal Bearing, Eng. Mechanics, 15, 6, 461–470 (2008) [Google Scholar]
F. Stefani, A. Rebora, Steadily loaded journal bearings: Quasi-3D mass–energy conserving analysis, Trib. Int., 42, 3, 448–460 (2009) [CrossRef] [Google Scholar]
F. Stefani, FEM Applied to Hydrodynamic Bearing Design, New Tribological Ways, 451–476 (2011) [Google Scholar]
B. Nevada, Rotor kit servofluid control bearing option manual, Nevada: Bently (2000). [Google Scholar]
M. Trachsel, R. Pittiti, and J. Dual, Friction and 2D position measurements in small journal bearings, Trib. Int., 6 (2016) [Google Scholar]
F. Stefani, Design and fast verification of pocket elliptical journal bearings, Ind. Lubr. and Trib., 66, 393–401 (2014) [CrossRef] [Google Scholar]
B. Jacobsson, L. Floberg, The Finite Journal Bearing Considering Vaporization, Trans. of Chalmers University of Technology, 190 (1957) [Google Scholar]
K. Olsson, Cavitation in Dynamically Loaded Bearings, Trans. of Chalmers University of Technology, 308 (1965) [Google Scholar]
A. Kumar, J.F. Booker, A Mass and Energy Conserving Finite Element Lubrication Algorithm, ASME J. Tribol., 116, 4, 667–671 (1994) [CrossRef] [Google Scholar]
C. Gazley, Heat-transfer characteristics of the rotational axial flow between concentric cylinders, Trans. of the ASME, 80, 79–90 (1958) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.

[1] J. Tůma, J. Biloš, Fluid Induced Instability of Rotor Systems with Journal Bearings, Eng. Mechanics, 14, 1-2, 69–80 (2007) [Google Scholar]

[2] V. Meruane, Identification of nonlinear dynamic coefficients in plain journal bearings, Trib. Int., 41, 8, 743–754 (2008) [CrossRef] [Google Scholar]

[3] M.L. Ferrari, A. Traverso, A.F. Massardo, Smart polygeneration grids: Experimental performance curves of different prime movers, Applied Energy, 162, 622–630 (2016) [Google Scholar]

[4] J. Tůma, A. Bilošová, J. Šimek, R. Svoboda, A Simulation Study of the Rotor Vibration in a Journal Bearing, Eng. Mechanics, 15, 6, 461–470 (2008) [Google Scholar]

[5] F. Stefani, A. Rebora, Steadily loaded journal bearings: Quasi-3D mass–energy conserving analysis, Trib. Int., 42, 3, 448–460 (2009) [CrossRef] [Google Scholar]

[6] F. Stefani, FEM Applied to Hydrodynamic Bearing Design, New Tribological Ways, 451–476 (2011) [Google Scholar]

[7] B. Nevada, Rotor kit servofluid control bearing option manual, Nevada: Bently (2000). [Google Scholar]

[8] M. Trachsel, R. Pittiti, and J. Dual, Friction and 2D position measurements in small journal bearings, Trib. Int., 6 (2016) [Google Scholar]

[9] F. Stefani, Design and fast verification of pocket elliptical journal bearings, Ind. Lubr. and Trib., 66, 393–401 (2014) [CrossRef] [Google Scholar]

[10] B. Jacobsson, L. Floberg, The Finite Journal Bearing Considering Vaporization, Trans. of Chalmers University of Technology, 190 (1957) [Google Scholar]

[11] K. Olsson, Cavitation in Dynamically Loaded Bearings, Trans. of Chalmers University of Technology, 308 (1965) [Google Scholar]

[12] A. Kumar, J.F. Booker, A Mass and Energy Conserving Finite Element Lubrication Algorithm, ASME J. Tribol., 116, 4, 667–671 (1994) [CrossRef] [Google Scholar]

[13] C. Gazley, Heat-transfer characteristics of the rotational axial flow between concentric cylinders, Trans. of the ASME, 80, 79–90 (1958) [Google Scholar]