Open Access
| Issue |
E3S Web Conf.
Volume 124, 2019
International Scientific and Technical Conference Smart Energy Systems 2019 (SES-2019)
|
|
|---|---|---|
| Article Number | 05090 | |
| Number of page(s) | 7 | |
| Section | Additional papers | |
| DOI | https://doi.org/10.1051/e3sconf/201912405090 | |
| Published online | 10 February 2020 | |
- Potapova M.S., Vinogradov D.V. Overview of curved mills [Obzor frez s krivolineynoy rezhushchey kromkoy] Nauka i obrazovanie. Nauchnoe izdanie Moskovskogo gosudarstvennogo tekhnicheskogo universiteta imeni N.E. Baumana. Moscow, 2014. Is. 11. Pp. 21–33. (In Russ.) [Google Scholar]
- Morozov V.G. Wood cutting tool. Handbook [Derevorezhushchiy instrument. Spravochnik]. Moscow, 1988, 332 p. (In Russ.) [Google Scholar]
- Glebov I.T. Woodcutting tools [Derevorezhushchij instrument]. Yekaterinburg: USFTU, 2001. 197 p. (In Russ.) [Google Scholar]
- Zotov G.A. Woodcutting tools. Construction and operation [Derevorezhushchij instrument. Konstrukciya i ekspluataciya]. SPb.: “Lan’”, 2010. 384 p. (In Russ.) [Google Scholar]
- Sanev V.I., Kamenev B.B., Sergeevichev A.V. Cutting wood and wood materials [Rezaniye drevesiny i drevesnykh materialov] SPb.: “Lan’”, 2018. 456 p. (In Russ.). [Google Scholar]
- Amalitsky V. V., Amalitsky V. V. Inventory of branch [Oborudovanie otrasli]. Moscow: GOU MGUL, 2005. 560 p. (In Russ.) [Google Scholar]
- Vereshchagin V.Yu., Mokrickij B.Ya., Vereshchagina A.S. Analysis of composite end mill test results [Analiz rezul'tatov ispytanij sostavnyh koncevyh frez]. Uchenye zapiski Komsomol'skogo na Amure gosudarstvennogo tekhnologicheskogo universiteta, 2016, Vol.1, is.3 (27), pp. 53–56. (In Russ.) [Google Scholar]
- Glebov I.T. Cutting of wood [Rezanie drevesiny]. SPb.: “Lan’”, 2010. 256p. (In Russ.) [Google Scholar]
- Zotov G.A. Machine tools for woodcutting [Stanochnyj derevorezhushchij instrument]. Moscow, 2005. 307 p. (In Russ.) [Google Scholar]
- Kamenev B. B., Sergeevichev A. V. Woodcutting tools [Derevorezhushchie instrument]. SPb.: SPbGLTU, 2013. 330 p. (In Russ.) [Google Scholar]
- Usachev P.A., Parkhomenko S.G. Increased wear and tear of cutting tools [Povysheniye iznosostoykosti i prochnosti rezhushchikh instrumentov]. Kiev, 1988. 156 p. (In Russ.) [Google Scholar]
- Loladze T.N. Strength and wear resistance of the cutting tool [Prochnost’ i iznosostojkost’ rezhushchego instrumenta]. Moscow, 1987, 320 p. (In Russ.) [Google Scholar]
- Bachmann G., Fischer R., Habber W. Holzbearbeitung. Leipzig: Fachbunchvert, 1994. 500 p. [Google Scholar]
- Kim A.B. Analysis of the geometric parameters of prefabricated end mills with interchangeable polyhedral plates [Analiz geometricheskih parametrov sbornyh koncevyh frez so smennymi mnogogrannymi plastinami] Progressivnye tekhnologii i ekonomika v mashinostroenii. Trudy II Vserossijskoj nauchnoprakticheskoj konferencii, 2004. Pp. 84–88. (In Russ.) [Google Scholar]
- Savolov A.V., Nikolaev D.Yu., Nikolaev A.Yu. Study of the influence of the imbalance of tool settings on the output indicators of milling [Issledovaniye vliyaniya disbalansa instrumental’nykh naladok na vykhodnyye pokazateli frezerovaniya] Vestnik Irkutskogo gosudarstvennogo tekhnologicheskogo universiteta. Irkutsk, 2015. Is. 7(102). Pp. 81–91. (In Russ.) [Google Scholar]
- Egodurov G.S., Bochetkueva E.B. About mechanical testing of materials in the course of resistance of materials [O mekhanicheskih ispytaniyah materialov v kurse soprotivleniya materialov] Sbornik nauchnyh trudov. Seriya: mekhanika konstrukcij i materialov. Kompozicionnye materialy i nanomaterialy, 2016. Pp. 123–130. (In Russ.) [Google Scholar]
- Logvinov V.B., Evtushenko S.I., Kaznacheeva O.K., Petrov I.A. Reference materials for design and engineering work on the resistance of materials, construction and applied mechanics [Spravochnye materialy k raschetno-proektnym rabotam po soprotivleniyu materialov, stroitel’noj i prikladnoj mekhanike]. The 3rd edition. Novocherkassk, 583 p. (In Russ.) [Google Scholar]
- Timoshenko S.P., Goodyear D. Theory of Elasticity [Teoriya uprugosti]. Moscow, 1985. 575 p. (In Russ.) [Google Scholar]
- Bachmann G., Fischer R., Habler W. Holzbearbeitung. Leipzig: Fachbuchverl, 1994. 500 p. [Google Scholar]
- Ostaf’yev V.A. Calculation of the dynamic strength of the cutting tool [Raschet dinamicheskoy prochnosti rezhushchego instrumenta]. Moscow, 1989, 168 p. (In Russ.) [Google Scholar]
- Kapralov V.M., Kopen’ko G.S. Influence of loading frequencies on material fatigue resistance [Vliyanie chastot nagruzheniya na soprotivlenie ustalosti materialov] Nauchno-tekhnicheskie vedomosti SPbPU. Estestvennye i inzhenernye nauki. Vol. 25. Is.2, 2019. Pp.68–72. (In Russ.) [Google Scholar]
- Tarankova E.S., Sosnovskij L.A. The influence of the working environment on the fatigue resistance of materials: a review of studies [Vliyanie rabochej sredy na soprotivlenie ustalosti materialov: obzor issledovanij] Vestnik Belorusskogo gosudarstvennogo universiteta transporta: Nauka i transport. Minsk. Is. 2(23), 2011. Pp. 87–90. (In Russ.) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.