Open Access
| Issue |
E3S Web Conf.
Volume 130, 2019
The 1st International Conference on Automotive, Manufacturing, and Mechanical Engineering (IC-AMME 2018)
|
|
|---|---|---|
| Article Number | 01031 | |
| Number of page(s) | 7 | |
| DOI | https://doi.org/10.1051/e3sconf/201913001031 | |
| Published online | 15 November 2019 | |
- J.M. Margolis. Engineering plastics handbook. Montreal: The McGraw-Hill Companies, Inc. (2006). p.77. https://epdf.tips/engineering-plastics-handbook-mcgraw-hill-handbooks.html [Google Scholar]
- Y. Beauchamp, M. Thomas, Y.A. Youssef, J. Masounave, J. Computers and Industrial Engineering, 31, 3–4: 645–651 (1996). https://www.researchgate.net/publication/232394599_Investigation_of_cutting_parameter_effects_on_surface_roughness_in_lathe_boring_operation_by_use_of_a_full_factorial_design [CrossRef] [Google Scholar]
- G. Vohra, P. Singh, H.S. Sodhi, NCRAET: 232–237 (2013). http://ijcsce.in/wp-content/uploads/2013/06/IJCSCESI045513.pdf [Google Scholar]
- M.P. Vaishnav and S.A. Sonawane, IJERT, 3, 8: 717–721 (2014). https://www.ijert.org/research/optimization-of-boring-process-parameters-by-usingtaguchi-method-IJERTV3IS080601.pdf [Google Scholar]
- P.M. Borade and M.J. Deshmukh, IJERT, 3, 3: 1099–1101 (2014). https://www.ijert.org/research/optimization-of-process-parameters-in-boring-operationa-review-IJERTV3IS030803.pdf [Google Scholar]
- P. Kumar, J.S. Oberoi, C. Singh, H. Dhiman, International Journal of Advanced Mechanical Engineering, 4, 6: 647–655 (2014). https://www.ripublication.com/ijame-spl/ijamev4n6spl_08.pdf [Google Scholar]
- T. Panyaphirawat, P. Sapsmarnwong, T. Pornyungyuen, International Journal of Industrial and Manufacturing Engineering, 8, 9: 1516–1520 (2014). https://waset.org/publications/9999236/an-optimization-of-machine-parameters-formodified-horizontal-boring-tool-using-taguchi-method [Google Scholar]
- C. Chennu, V.S. Nitish, A.S. Kumar, K.B. Narayana, J. Moghaveera, IJRET, 5, 13 (2016). https://ijret.org/volumes/2016v05/i25/IJRET20160525031.pdf [Google Scholar]
- L. Rico, S. Noriega, J.L. García, E.A. Martínez, R. Ñeco, F.J. Estrada, Journal of applied research and technology, 8, 3: 395–403 (2010). https://www.researchgate.net/publication/262476081_Effect_of_the_Side_CuttingEdge_Angle_on_the_Surface_Roughness_for_Aluminum_1350_in_the_Turning_Operation_by_Taguchi_Method [CrossRef] [Google Scholar]
- R. Mohammad, M.K.A.M. Ariffin, B.H.T. Baharuddin, F. Mustapha, H. Aoyama, Journal of Mechanical Engineering, 3, 1: 45–54 (2017). https://jmeche.uitm.edu.my/wpcontent/uploads/bsk-pdf-manager/5_SI_Vol_3_1_ID012_105.pdf [Google Scholar]
- Z.A. Karim, S.A.S Azuan, A.Y.M.S., Australian Journal of Basic and Applied Sciences, 7, 10: 46–51 (2013). https://ir.unikl.edu.my/jspui/bitstream/123456789/7375/1/A%20Study%20on%20Tool%20Wear%20and%20Surface%20Finish%20by%20Applying%20Positive%20and%20Negative%20Rake%20angle.pdf [Google Scholar]
- L. Setiawati. Studi tentang parameter – parameter yang berpengaruh untuk menghasilkan laju pemakanan material dan kekasaran permukaan yang optimum pada pemesinan polyacetal. [Study on influenced parameters to achieve optimum material removal rate and surfaceroughness on polyacetal machining] [Thesis] Teknik Manufaktur, Universitas Surabaya (2004). [in Bahasa Indonesia]. p. IV–1–IV–48 [Online] from http://digilib.ubaya.ac.id/data_pustaka-134748.html [Acessed on 11 January 2018] [Google Scholar]
- A. Sugiantoro. Studi geometri pahat, parameter pemesinan dan cairan pendingin untuk optimalisasi performasi pemesinan polyacetal. [A study on tool geometry, machining parameters, and coolant to optimize the performance of polyacetal machinig] [Thesis] Teknik Manufaktur, Universitas Surabaya (2004). [in Bahasa Indonesia]. p. IV-1–IV-35 [Online] from http://digilib.ubaya.ac.id/data_pustaka-134824.html [Acessed on 11 January 2018] [Google Scholar]
- S. Kalpakjian. Manufacturing engineering and technology. 7th ed. Massachusets: Addison-Weasley Publishing Company, Inc. (2013). p. 625–667 https://www.academia.edu/36063951/Manufacturing_Manufacturing_Engineering_and_Technology_SI_by_Serope_Kalpakjian_7th_Pearson_2013_1_ [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.