Open Access
| Issue |
E3S Web Conf.
Volume 135, 2019
Innovative Technologies in Environmental Science and Education (ITESE-2019)
|
|
|---|---|---|
| Article Number | 03016 | |
| Number of page(s) | 8 | |
| Section | Green Architecture and Sustainable Urban Design | |
| DOI | https://doi.org/10.1051/e3sconf/201913503016 | |
| Published online | 04 December 2019 | |
- TKP EN 1993-1-1-2009 (02250) Eurocode 3. Design of steel structures. Part 1-1. General rules and regulations for buildings [Google Scholar]
- TKP EN 1993-1-3-2009 (02250) Eurocode 3. Design of steel structures. Part 1-3. General rules. Additional rules for cold formed elements and profiled sheets [Google Scholar]
- TKP EN 1993-1-5-2009 (02250) Eurocode 3. Design of steel structures. Part 1-5. Lamellar structural elements [Google Scholar]
- Design Manual for Direct Strength Method of Cold-Formed Steel Design/ prepared by: Ben Schafer, Ph.D. for American Iron and Steel Institute Committee on Specifications (2002) [Google Scholar]
- B.W. Schafer, S. Adany, Buckling analysis of cold-formed steel members using CUFSM: conventional and constrained finite strip methods. 18th International Spec. Conf. on Cold-Form. Steel Struct., Orlando, Florida (2006) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.