Open Access
Issue |
E3S Web Conf.
Volume 136, 2019
2019 International Conference on Building Energy Conservation, Thermal Safety and Environmental Pollution Control (ICBTE 2019)
|
|
---|---|---|
Article Number | 03019 | |
Number of page(s) | 6 | |
Section | Energy Conservation Renovation of Green Buildings and Existing Buildings | |
DOI | https://doi.org/10.1051/e3sconf/201913603019 | |
Published online | 10 December 2019 |
- Battini, D., Donzella, G., Avanzini, A., et al. Experimental testing and numerical simulations for life prediction of gate valve O-rings exposed to mixed neutron and gamma fields. Materials & Design, 156: 514-527. (2018) [CrossRef] [Google Scholar]
- Lu, P. Introduction and proficiency in valve design. ChinaMachine Press, Beijing. (2013) [Google Scholar]
- Li, B., He, Z., Chen, X. ANSYS Workbench design, simulation and optimization. Tsinghua University Press, Beijing. (2013) [Google Scholar]
- Han, J. Thermal-structural analysis and fatigue life evaluation of a parallel slide gate valve in accordance with ASME B&PVC. Transactions of the KSME, 41: 157-164. (2017) [Google Scholar]
- Lin, Z., Ma, G., Cui, B., et al. Influence of flashboard location on flow resistance properties and internal features of gate valve under the variable condition. Journal of Natural Gas Science and Engineering, 33: 108-117. (2016) [CrossRef] [Google Scholar]
- Minhas, A., Patel, S., Kazerooni, E., et al. Iterative reconstruction results in larger computed tomography measurements of iliofemoral artery diameter in patients referred for transcatheter aortic valve replacement. Journal of Computer Assisted Tomography, 40: 773-776. (2016) [CrossRef] [PubMed] [Google Scholar]
- Hao, W., Noureddine, B., Abdellatif, I., et al. Fracture toughness prediction of avalve body: numerical analysis. Engineering Failure Analysis, 17: 135-142. (2010) [CrossRef] [Google Scholar]
- Novosel, L., Perkov, D., Dobrota, S., et al. Aortic coarctation associated with aortic valve stenosis and mitral regurgitation in an adult patient: a two-stage approach using a large-diameter stent graft. Annals of Vascular Surgery, 28: 15-20. (2014) [CrossRef] [Google Scholar]
- Cai, H., Gao, L., Xu, L. Calculation of maximumtorque operating conditions for inverter-fed induction machine using Finite-Element Analysis. IEEE Transactions on Industrial Electronics, 66: 2649-2658. (2019) [CrossRef] [Google Scholar]
- Wang, S., Wang, Y., Zi, Y., et al. A 3D finite element-based model order reduction method for parametric resonance and whirling analysis of anisotropic rotor-bearing systems. Journal of Sound and Vibration, 359: 116-135. (2015) [CrossRef] [Google Scholar]
- Fertahi, S., Bouhal, T., Arid, A., et al. Thermo-mechanical strength analysis for energy storage improvement of horizontalstorage tanks integrating evacuated tube collectors. International Journal of Hydrogen Energy, 42: 29370-29383. (2017) [CrossRef] [Google Scholar]
- Alonso, D., De, S., Saenz, J., et al. Topology optimization applied to the design of 2D swirl flow devices. Structural and Multidisciplinary Optimization, 58: 2341-2364. (2018) [CrossRef] [Google Scholar]
- Mahomed, N., Kleynhans, H. Reducing shrinkage porosity in high-performance steel castings: case of an ASME B16.34 gate valve body: Part 1—analysis, techniques and experimental approach. International Journal of Metalcasting, 12: 919-926. (2018) [CrossRef] [Google Scholar]
- Sumit, D. Stress analysis of gate valve by ANSYS. DAV International Journal of Science, 3: 33-41. (2013) [Google Scholar]
- Li, S., Li, L., Hou, Y. Seal analysis and optimization of large diameter gate valve based on ANSYS. Applied Mechanics andMaterials, 415: 498-501. (2013) [CrossRef] [Google Scholar]
- Lin, Z., Zhu, L., Cui, B., et al. Effect of placements (horizontal with vertical) on gas-solid flow and particle impact erosion in gate valve. Journal of Thermal Science, 23: 558-563. (2014) [CrossRef] [Google Scholar]
- Sathishkumar, S., Hemanathan, R., Gopinath, R., et al. Design and analysis of gate valve body and seat ring. International Journal of Mechanical Engineering and Technology, 8: 131-141. (2018) [Google Scholar]
- Mahmoodi, K., Ghassemi, H., Nowruzi, H., et al. Prediction of thehydrodynamic performance and cavitation volume of the marine propeller using gene expression programming. Ships and Offshore Structures, 14:723-736. (2019) [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.