Open Access
Issue |
E3S Web Conf.
Volume 137, 2019
XIV Research & Development in Power Engineering (RDPE 2019)
|
|
---|---|---|
Article Number | 01014 | |
Number of page(s) | 7 | |
DOI | https://doi.org/10.1051/e3sconf/201913701014 | |
Published online | 16 December 2019 |
- Wey m.y., Lin Ch L., You S.D, Fluidized behaviour and heat transfer in a bubbling fluidized bed incinerator, J. Environ. Eng. Manage., Vol. 17(3), pp. 169–175, (2007). [Google Scholar]
- Kim S.W., Kim S.D., Heat transfer characteristics in a pressurized fluidized bed of fine particles with immersed horizontal tube bundle, Int. J. Heat Mass Tran., Vol. 63, pp. 269–277, (2013). [CrossRef] [Google Scholar]
- Merzsch M., Lechner S., Krautz H.J., Heat transfer from single horizontal tubes in fluidized beds: Influence of tube diameter, moisture and diameter definition by Geldart C fines content, Power Technol., Vol. 235, pp. 1038–1046, (2013). [CrossRef] [Google Scholar]
- Di Natale F., Bareschino P., Nigro R., Heat transfer and void fraction profiles around a horizontal cylinder immersed in a bubbling fluidised bed, Int. J. Heat Mass Tran., Vol. 53, 3525–3532, (2010). [CrossRef] [Google Scholar]
- Stenberg V., Skoldberg V., Ohryby L., Ryden M., Evaluation of bed-to-tube surface heat transfer coefficient for a horizontal tube in bubbling fluidized bed at high temperature, Powder Technol., Vol. 352, pp. 488–500, (2019). [Google Scholar]
- Blaszczuk A., Pogorzelec M., Shimizu T., Heat transfer characteristics in a large-scale bubbling fluidized bed with immersed horizontal tube bundles, Energy, Vol. 162, 10–19, (2018). [CrossRef] [Google Scholar]
- Mickley H.S., Fairbanks D.F., Mechanism of heat transfer of fluidized beds, AIChE J., Vol. 1, 374–384, (1955). [Google Scholar]
- Yang W., Ch. (ed.), Fluidization, solids, handling, and processing. Industrial Applications, Noyes Publications, Westwood, New Jersey, USA, (1998). [Google Scholar]
- Yang W., Ch. (ed.), Handbook of fluidization and fluid-particle systems, Marcel Dekker Inc. , New York, (2003). [Google Scholar]
- Baskakov A.P., Berg B.V., Vitt O.K., Fillippovsky N.F., Kirakosyan V.A., Goldobin J.M., Maskaev V.K., Heat transfer to objects immersed in fluidized bed, Powder Technol., Vol. 8, 273–282, (1973). [Google Scholar]
- Glickeman L.R., Decker N.A., Design relationship for predicting heat transfer to tube bundles in fluidized bed combustion. In: Proceedings of the sixth annual international conference on fluidized bed combustors, Atlanta, GA, Vol. 111, pp. 1152–1158, (1980). [Google Scholar]
- Kunii D., Levenspielen O., Fluidization engineering. Butterworth-Heinemann, London, (1991). [Google Scholar]
- Ozkaynak T.F., Chen J.C., Emulsion phase residence time and its use in heat transfer models in fluidized beds, AIChE Journal, Vol. 26, 544–550, (1980). [CrossRef] [Google Scholar]
- Blaszczuk A., Nowak W., Heat transfer behavior inside a furnace chamber of large-scale supercritical CFB boiler, Int. J. Heat Mass Tran., Vol. 87, 464–480, (2015). [CrossRef] [Google Scholar]
- Blaszczuk A., Zylka A., Leszczynski J., Simulation of mass balance behaviour in a large-scale circulating fluidized bed reactor, Particuology, Vol. 25, 51–58, (2016). [CrossRef] [Google Scholar]
- US Patent No US 6962676B1, Method and apparatus in a fluidized bed heat exchanger, (2005). [Google Scholar]
- Wang L., Wu P., Ni X., Surface-particle-emulsion model of heat transfer between a fluidized bed and a immersed surface, Powder Technol., Vol. 149, 127–138, (2005). [Google Scholar]
- Parmar M.S., Hayhurst A.N., The heat transfer coefficient for a freely moving sphere in a bubbling fluidised bed, Chem. Eng. Sci., Vol. 57, 3485–3494, (2002). [Google Scholar]
- Pidwerbecki D., Welty J.R., Heat transfer to a horizontal tube in the splash zone of a bubbling fluidized bed, an experimental study of particle size effects, Exp. Therm. Fluid Sci., 10(3), 307–317, (1995). [CrossRef] [Google Scholar]
- Masoumifarad N., Mostoufi N., Hamidi AA.., Sotudeh-Gharebagh R., Investigation of heat transfer between a horizontal tube and gas-solid fluidized bed, Int. J Heat Fluid Flow, Vol. 29, 1504–1511, (2008). [Google Scholar]
- Lu P., Cao Y., Pan W.P., Ma CH., Heat transfer characteristics in a horizontal swirling fluidized bed, Exp. Therm. Fluid Sci., Vol. 35, 1127–1134, (2011). [CrossRef] [Google Scholar]
- Botterill J.S.M., Teoman Y., Yuregir K.R., Temperature effects on the heat transfer behaviour of Gas fluidised beds, AICHE symposium series, 77. 330–340, (1981). [Google Scholar]
- Prins W., Fluidised bed combustion of a single carbon particle, PhD Thesis, Twente University, Netherlands, (1987). [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.