Open Access
| Issue |
E3S Web Conf.
Volume 137, 2019
XIV Research & Development in Power Engineering (RDPE 2019)
|
|
|---|---|---|
| Article Number | 01025 | |
| Number of page(s) | 5 | |
| DOI | https://doi.org/10.1051/e3sconf/201913701025 | |
| Published online | 16 December 2019 | |
- Rusin A., Wojaczek A., 2015, Trends of changes in the power generation system structure and their impact on the system reliability, Energy, 92, pp. 128-134. [Google Scholar]
- Lukowicz H., Rusin A., 2018, The impact of the control method of cyclic operation on the power unit efficiency and life, Energy, 150, pp. 565-574. [Google Scholar]
- Taler J., Węglowski B., Taler D., Sobota T., Dzierwa P., Trojan M., Madejski P., Pilarczyk M., 2015, Determination of start-up curves for a boiler with natural circulation based on the analysis of stress distribution on critical pressure components, Energy, 92, pp. 153-159. [Google Scholar]
- Taler J., Węglowski B., Zima W., Grądziel S., Zborowski M., 1999, Analysis of Thermal Stresses in a Boiler Drum During Start-up, Transactions of the ASME, Journal of Pressure Vessel Technology, 121, pp. 84-93. [Google Scholar]
- Taler J., Dzierwa P., Taler D., Harchut P., 2015, Optimization of the boiler start-up taking into account thermal stresses, Energy, 92 (1), pp. 160-170. [Google Scholar]
- Zhang H., Xie D., Yu Y., Yu L., 2016, Online optimal control schemes of inlet steam temperature during start-up of steam turbines considering low- cycle fatigue, Energy, 117, pp. 105-115. [Google Scholar]
- Ji D., Sun J., Sun Q., Guo H-C., Ren J., 2018, Optimization of start-up scheduling and life assessment for a steam turbine, Energy, 160, pp. 19-32. [Google Scholar]
- Richter M., Oeljeklaus G., Gorner K., Improving the load flexibility of coal-fired power plants by the integration of a thermal energy storage, Applied Energy 236, 2019, pp. 607-621. [Google Scholar]
- Sun Y-J., Liu X-Q., Hu L-S., Tang X-Y., .:Online life estimation for steam turbine rotor, Journal of Loss Prevention in the Process Industries 26, 2013, pp. 272-279. [CrossRef] [Google Scholar]
- Du Q-W., Zheng Z-L., Xie Y-H., 2016, Optimization on start-up process of high-pressure rotor for large power steam turbine, Thermal Science, 20, pp. 815-822. [Google Scholar]
- Ji D-M., Sun J-Q., Dui Y., Ren J-X., 2017, The optimization of the start-up scheduling for a 320 MW steam turbine, Energy, 125, pp. 345-355. [Google Scholar]
- Rusin A., Lukowicz H., Kosman W., 2015, Transient Temperature and Thermal Stresses in Turbine Components, a chapter in: R. Hetnarski (ed.), Encyclopaedia of Thermal Stresses, Springer Science, Netherlands. [Google Scholar]
- Chmielniak T., Nowak G., Lukowicz H., Rusin A., 2017, Analysis of Thermal and Stress States in Transient Operation of a Turbine Co-operating with Twinboiler, Heat Transfer Engineering, 39, (13-14), pp. 1251-1259. [Google Scholar]
- Hähner J., Soyarslan B., Çakan W., Bargmann G., 2019, Determining Tensile Yield Stresses from Small Punch Tests: A numerical-based scheme, Materials & Design, Volume 182, pp. 1-11 [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.