Open Access
Issue
E3S Web Conf.
Volume 140, 2019
International Scientific Conference on Energy, Environmental and Construction Engineering (EECE-2019)
Article Number 01007
Number of page(s) 4
Section Waste Management
DOI https://doi.org/10.1051/e3sconf/201914001007
Published online 18 December 2019
  1. Environmental Protection, 2012–2020, National Programme of the Russian Federation / Ministry of Natural Resources and Ecology of the Russian Federation [electronic resource], accessed at: http://www.mnr.gov.ru/upload/iblock/81d/gosprogramma%202012_2020.pdf (accessed on 05 January 2017). [Google Scholar]
  2. Final Report on the Waste in Russia: Garbage or a Valuable Resource? Scenarios of Development of the Municipal Solid Waste Handling Sector // International Financial Corporation (IFC, World Bank Group). [electronic resource], accessed at: http://www.ifc.org/wps/wcm/connect/6895a9004392026fb0dbb8869243d457/IFC%20Waste%20in%20Russia%20Report_rus.pdf?MOD=AJPERES (accessed on 05 January 2017). [Google Scholar]
  3. http://www.consultant.ru/document/cons_doc_LAW_19109/ (accessed on 05 January 2017). Federal Law dated 24 June 1998, No. 89-FZ (rev. dated 28 December 2016), Industrial and Consumer Waste / ConsultantPlus [electronic resource], accessed at: [Google Scholar]
  4. http://government.ru/info/25783/ (accessed on 05 January 2017). Clean Country priority project profile / Government of the Russian Federation [electronic resource], accessed at: [Google Scholar]
  5. Nikulin, A.N. The research of possibility to use the machine for biofuel production as a mobile device for poultry farm waste recycling / A.N. Nikulin, S.V. Kovshov, K.V. Epifancev, G.I. Korshunov // Life Science Journal, 2014; 11(4) Pp. 464-467. [Google Scholar]
  6. Kocserha, I. Effects of Extruder Head’s Geometry on the Properties of Extruded Ceramic Products / I. Kocserha, F. Kristály // Materials Science Forum. Vol. 659 (2010) pp. 499-504. [CrossRef] [Google Scholar]
  7. Benbow, J. Paste Flow and Extrusion / J. Benbow, J. Bridgwater // Clarendon Press, Oxford U.K., 1993. 425 p. [Google Scholar]
  8. Bogatov, B.A. Managing peat bog development. / Mn.: Higher School, 1985. 168 p. [Google Scholar]
  9. Epifancev, K. Modeling of peat mass process formation based on 3D analysis of the screw machine by the code YADE / K. Epifancev, A. Nikulin, S. Kovshov, S. Mozer, I. Brigadnov // American Journal of Mechanical Engineering. 1(3). 2013. p. 73-75. [Google Scholar]
  10. Epifancev K. Development of software platform for collection and exchange of data in the field of waste management. Epifancev K., Hvan D., Morokina G., Baranov I. // IOP Conference Series: Materials Science and Engineering International Workshop “Advanced Technologies in Material Science, Mechanical and Automation Engineering – MIP: Engineering – 2019”. Krasnoyarsk Science and Technology City Hall of the Russian Union of Scientific and Engineering Associations. 2019. p. 65-70. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.