Open Access
Issue
E3S Web Conf.
Volume 140, 2019
International Scientific Conference on Energy, Environmental and Construction Engineering (EECE-2019)
Article Number 02017
Number of page(s) 6
Section Development of New Perspective Technological Products
DOI https://doi.org/10.1051/e3sconf/201914002017
Published online 18 December 2019
  1. ACI 363.2R-11: Guide to Quality Control and Assurance of High-Strength Concrete, 19 (2011) [Google Scholar]
  2. BS EN 1992-1-1:2004 Eurocode 2. Design of concrete structures, 227 (2011) [Google Scholar]
  3. EN 206-1. Concrete – Part 1: Specification, performance, production and conformity, 41 (2013) [Google Scholar]
  4. GOST 31914-2012 High-strength heavy and fine concretes for monolithic constructions. Rules for quality control and assessment, 15 (2012) [Google Scholar]
  5. Code of practice 63.13330.2012 Concrete and reinforced concrete structures. The main provisions. Updated edition of Construction Standards and Regulations 52-01-2003, 434 (2012) [Google Scholar]
  6. Code of practice 311.1325800.2017 Concrete and reinforced concrete structures from high strength concrete. Design rules, 27 (2017) [Google Scholar]
  7. R. Drzymała, T. Jackiewicz-Rek, W. Gałaj, J. Šukys, J. Civ. Eng. Manag. 24, 138-144 (2018) DOI: 10.3846/jcem.2018.457 [CrossRef] [Google Scholar]
  8. H. A. Kottb, N. F. El-Shafey, and A. A. Torkey, HBRC J. 11, 22-34 (2015) DOI: 10.1016/j.hbrcj.2014.02.006 [CrossRef] [Google Scholar]
  9. R. Golov, V. DIkareva, R. Gorshkov, and A. Agarkov, E3S Web Conf. 33, 6 (2018) DOI: 10.1051/e3sconf/20183303033 [CrossRef] [Google Scholar]
  10. J. Davari, M. Jazayeri Moghdas, J Fundam Appl Sci. 8, 532-546 (2016) DOI: 10.4314/jfas.8vi2s.35 [CrossRef] [Google Scholar]
  11. O. Smirnova, Procedia Eng. 172, 1039-1043 (2017) DOI: 10.1016/j.proeng.2017.02.158 [Google Scholar]
  12. D. Benamara, B. Mezghiche, and M. F. Zohra, Phys. Procedia 55, 342-347 (2014) DOI: 10.1016/j.phpro.2014.07.050 [Google Scholar]
  13. N.I. Vatin, Yu.G. Barabanshchikov, M.V. Komarinskiy, Mag. Civ. Eng. 56(4), 3-10 (2015) DOI: 10.5862/MCE.56.1 [CrossRef] [Google Scholar]
  14. A. Alsalman, C. N. Dang, G. S. Prinz, and W. M. Hale, Constr. Build. Mater. 153, 918-928 (2017) DOI: 10.1016/j.conbuildmat.2017.07.158 [Google Scholar]
  15. U. K. Sharma, P. Bhargava, and S. K. Kaushik, J. Adv. Concr. Technol. 3, 267-281 1. (2005) DOI: 10.3151/jact.3.267 [CrossRef] [Google Scholar]
  16. Z. Huang, X. Huang, W. Li, Y. Zhou, L. Sui, and J. Y. R. Liew, 323-329 (2018) DOI: 10.4995/ASCCS2018.2018.7034 [Google Scholar]
  17. R. Kliukas, A. Kudzys, and R. Vadluga, J. Civ. Eng. Manag. 16, 189-196 (2010) DOI: 10.3846/jcem.2010.20 [CrossRef] [Google Scholar]
  18. I.N. Starishko, Vestn. MGSU [Proceedings Moscow State Univ. Civ. Eng]. 3, 107-116 (2014) DOI: 10.22227/1997-0935.2014.3.107-116 [Google Scholar]
  19. A. F. Pour, A. Gholampour, J. Zheng, and T. Ozbakkaloglu, IOP Conf. Ser. Mater. Sci. Eng. 301, 6 (2018) DOI: 10.1088/1757-899X/301/1/012058 [Google Scholar]
  20. J. Qian, Y. Zhang, W. Zhang, J. Tsinghua Univ. Technol. 55, 1-7 (2015) [Google Scholar]
  21. D. R. C. de Oliveira, I. I. R. Damasceno, V. H. L. Branco, Rev. ALCONPAT 8, 150-162 (2018) DOI: 10.21041/ra.v8i2.276 [CrossRef] [Google Scholar]
  22. J. H. Lee and H. S. Son, ACI Struct. J. 97, 75-85 (2000) [Google Scholar]
  23. Kardasz, J. Doskocz, M. Hejduk, P. Wiejkut, and H. Zarzycki, J. Civ. Environ. Eng. 8, 308 (2016) DOI: 10.4172/2165-784X.1000308 [Google Scholar]
  24. S. A. Kristiawan, A. Supriyadi, S. Sangadji, T. Anggraeni, and M. M. Pattiwael, Int. J. Adv. Struct. Eng. 11, 31-43 (2019) DOI: 10.1007/s40091-019-0214-8 [CrossRef] [Google Scholar]
  25. W. P. Lokuge, S. Setunge, and J. G. Sanjayan, Mag. Concr. Res. 55, 331-341 (2003) DOI: 10.1680/macr.2003.55.4.331 [CrossRef] [Google Scholar]
  26. M. N. S. Hadi and H. Zhao, J. Mater. Civ. Eng. 23, 823-832 (2011) DOI: 10.1061/(ASCE)MT.1943-5533.0000234 [CrossRef] [Google Scholar]
  27. M. Elsayed, M. Elassaly, and W. Esmail, Int. Res. J. Eng. Technol. 5, 1336-1343 (2018) [Google Scholar]
  28. Y. Hou, S. Cao, X. Ni, Y. Li, Materials 12(13), 2139 (2019) DOI: 10.3390/ma12132139 [CrossRef] [Google Scholar]
  29. N. N. Trekin and E. N. Kodysh, Vestn. MGSU [Proceedings Moscow State Univ. Civ. Eng.] 2, 39-43 (2011) [Google Scholar]
  30. A.I. Bedov, V.V. Babkov, A.I. Gabitov, A.S Salov, Vestn. MGSU [Proceedings Moscow State Univ. Civ. Eng.] 8, 76-84 (2012) DOI: 10.22227/1997-0935.2012.8.76-84 [Google Scholar]
  31. Il.T. Mirsayapov, A.I. Fattakhova, Izv. KSUAE 4(42), 182-188 (2017) [Google Scholar]
  32. S.V. Ivleva, E.Yu. Malov, E.V Bykovskaya, Territorialnyj sbornik smetnyh tsen na materialy, izdeliya i konstruktsii, primenyaemye v stroitelstve. Sankt-peterburg. (TSSC 2001), 11(83) (2018) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.