Open Access
E3S Web Conf.
Volume 140, 2019
International Scientific Conference on Energy, Environmental and Construction Engineering (EECE-2019)
Article Number 04015
Number of page(s) 4
Section Energy Efficient and Green Buildings
Published online 18 December 2019
  1. Belsky A.A., Dobush V.S. Autonomous Electrothermal Facility for Oil Recovery Intensification Fed by Wind Driven Power Unit. IOP Conference Series: Earth and Environmental Science. 2017, Vol. 87, Issue 3, 03 (2006) [Google Scholar]
  2. Belsky A.A., Dobush V.S. Oil well electrical heating facility utilizing heating cable powered by autonomous wind-driven power unit (Dynamics of Systems, Mechanisms and Machines 2016) [Google Scholar]
  3. Belsky A.A., Dobush V.S. Analysis of UPS impact on power quality at point of common coupling of consumers (International Conference on Mechanical Engineering, Automation and Control Systems 2015) [Google Scholar]
  4. Belsky A.A., Dobush V.S. Analysis of UPS impact on voltage THD at point of common coupling. International Journal of Applied Engineering Research. 2016) Vol. 11, Issue 7, pp. 4995–4998 [Google Scholar]
  5. Frolov, V.Ya., Ivanov, D.V. Calculation of a plasma composition and its thermophysical properties in cases of maintaining or quenching of electric arcs, J. Phys.: Conf. Ser. 1058 012040 (2018) pp. 1-6 [CrossRef] [Google Scholar]
  6. Frolov V., Kvashnin A., Murashov I. (2018). Nonstationary mathematical model of a magnetic arc blast system. Proc. of EIConRus 2018, pp. 622-625, 2018 [Google Scholar]
  7. Chusov A., Podporkin G.V., Pinchuk M., Ivanov D., Murashov, I., Frolov, V. Development of a physical 2-D model for arc quenching chamber of lightning protection multichamber systems, proc of 33rd International Conference on Lightning Protection (ICLP), pp. 1-9, 2016 [Google Scholar]
  8. Toropchin A., Frolov V., Pipa A.V., Kozakov R., Uhrlandt D. Influence of the arc plasma parameters on the weld pool profile in TIG welding, J. Phys.: Conf. Ser, 550 012004, 2014, pp. 1-11 [CrossRef] [Google Scholar]
  9. Hansen, Robert C. Overall Equipment Effectiveness: a powerful production maintenance tool for increased profits. Industrial Press, 2001. ISBN 0-8311-3138-1 [Google Scholar]
  10. Zhukovskiy Y and Koteleva N (2017) IOP Conference Series: Materials Science and Engineering 177(1) 012014 [CrossRef] [Google Scholar]
  11. Matyukhin P.V., Markov V.O., Rabunets P.V. (Overall Industrial Equipment Effectiveness European Journal of Natural History. 2010) № 5. С. 53. [Google Scholar]
  12. Abramova I.G., Abramov D.A. Overall equipment effectiveness implementation criteria IOP Conference Series: Materials Science and Engineering, 30 012052, (2018) [CrossRef] [Google Scholar]
  13. Martins Cunha C C and CARDOSO FILHO B J IEMDC 2003 IEEE International Electric Machines and Drives Conference (2003) 703-708 [CrossRef] [Google Scholar]
  14. Thomson W.T., & Fenger M. Current signature analysis to detect induction motor faults. IEEE Ind. Appl. Mag. 2001 7(4) 26–34 [CrossRef] [Google Scholar]
  15. Sang Bin Lee, Tae-June Kang, Heedong Kim, Taesik Kong, Chaewoong Lim, Case studies of stator winding turn insulation failures in medium voltage motors, “ 2017 Annual Pulp, Paper And Forest Industries Technical Conference (PPFIC), Tacoma, WA, 2017, pp. 1-8 [Google Scholar]
  16. Şimşir, Mehmet et al. Real-Time Monitoring and Fault Diagnosis of a Low Power Hub Motor Using Feedforward Neural Network, Computational intelligence and neuroscience Vol. 2016 (2016) [Google Scholar]
  17. Malarev V I, Kopteva A V and Nogtev R A 2018 Electric drive simulation for drilling machine spinner IOP C. Ser.: Earth Env. 194(5) 052012 [Google Scholar]
  18. C. Hsiao, M. Liu Failure mode analysis of induction motor model, proc. of 2017 International Conference on Applied System Innovation (ICASI), Sapporo, pp. 25-28, (2017) [CrossRef] [Google Scholar]
  19. J. A. Antonino-Daviu, A. Quijano-López, M. Rubbiolo, V. Climente-Alarcon, Advanced Analysis of Motor Currents for the Diagnosis of the Rotor Condition in Electric Motors Operating in Mining Facilities, in IEEE Transactions on Industry Applications, Vol. 54, no. 4, pp. 3934-3942, (2018) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.