EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 140 (2019) E3S Web Conf., 140 (2019) 07005 References
Open Access
Issue
E3S Web Conf.
Volume 140, 2019
International Scientific Conference on Energy, Environmental and Construction Engineering (EECE-2019)
Article Number 07005
Number of page(s) 6
Section Information and Measuring Technologies
DOI https://doi.org/10.1051/e3sconf/201914007005
Published online 18 December 2019
  1. R. Z. Ríos-Mercado and C. Borraz-Sánchez, “Optimization problems in natural gas transportation systems: A state-of-the-art review,” Applied Energy, Vol. 147, pp. 536–555, 2015. DOI: 10.1016/j.apenergy.2015.03.017 [Google Scholar]
  2. Aksenov, A., Kozhukhov, Y., Sokolov, M., Simonov, A. Analysis and modernization of real gas thermodynamic calculation for turbocompressors and detander units. (2018) MATEC Web of Conferences, 245, article № 09005. [CrossRef] [EDP Sciences] [Google Scholar]
  3. Yun V.K. The use of advanced technologies to increase the economic efficiency of a centrifugal compressor. Gas industry №9, 2014 с 68-71. [Google Scholar]
  4. Danilishin, A.M., Kozhukhov, Y.V., Simonov, A.M. Gas-dynamic designing and profiling complex for the two-element centrifugal compressor stage with 3D impeller (2019) AIP Conference Proceedings, 2141, article № 030065, . [Google Scholar]
  5. Ivanov, V.M., Kozhukhov, Y.V., Danilishin, A.M. Calculation of the impellers head characteristics of the low-flow centrifugal compressor stages based on quasi-three-dimensional inviscid and viscous methods (2019) AIP Conference Proceedings, 2141, article № 030064. [Google Scholar]
  6. Yablokov, A., Yanin, I., Danilishin, A., Zuev, A. Ansys CFX numerical study of stages centrifugal compressor with low-flow rate coefficient. (2018) MATEC Web of Conferences, 245, article № 09002. DOI: 10.1051/matecconf/201824509002 [Google Scholar]
  7. Zharkovskii, A.A., Pospelov, A.Y. Use of 3D Methods for Flow Analysis, Prediction of Characteristics, and Optimization of the Shape of Settings of Hydraulic Turbines. (2015) Power Technology and Engineering, 49 (1), pp. 27-32. [CrossRef] [Google Scholar]
  8. Neverov, V., Kozhukhov, Y., Kartashov, S., Ivanov, V. The choice of key geometric parameters in the numerical optimization of centrifugal compressor impellers. (2018) MATEC Web of Conferences, 245, article № 09008. DOI: 10.1051/matecconf/201824509008 [CrossRef] [EDP Sciences] [Google Scholar]
  9. Aksenov, A.A., Danilishin, A.M., Dubenko, A.M., Kozhukov, Y.V. Development of the virtual experimental bench on the basis of modernized research centrifugal compressor stage test unit with the 3D impeller.(2017) IOP Conference Series: Materials Science and Engineering, 232 (1), article № 012042. DOI: 10.1088/1757-899X/232/1/012042 [CrossRef] [Google Scholar]
  10. Zhurkin, N., Donskoj, A., Zharkovskij, A. Numeric modeling and estimating the performance characteristics of a pneumatic driven high pressure pump. (2018) MATEC Web of Conferences, 245, # 09014. DOI: 10.1051/matecconf/201824509014. [CrossRef] [EDP Sciences] [Google Scholar]
  11. J. Li, Y. Yin, S. Li, and J. Zhang, “Numerical simulation investigation on centrifugal compressor performance of turbocharger,” Journal of Mechanical Science and Technology, Vol. 27, no. 6, pp. 1597–1601, 2013. [CrossRef] [Google Scholar]
  12. Aksenov, A., Kozhukhov, Y., Sokolov, M., Simonov, A. Analysis and modernization of real gas thermodynamic calculation for turbocompressors and detander units. (2018) MATEC Web of Conferences, 245, статья № 09005. DOI:10.1051/matecconf/201824509005 [CrossRef] [EDP Sciences] [Google Scholar]
  13. B. E. Launder and D. B. Spalding, “The numerical computation of turbulent flows, ” Computer Methods in Applied Mechanics and Engineering, Vol. 3, no. 2, pp. 269–289, 1974. DOI: 10.1016/0045-7825(74)90029-2 [Google Scholar]
  14. M. V. Casey, P. Dalbert, and P. Roth, “The use of 3D viscous flow calculations in the design and analysis of industrial centrifugal compressors, ” Journal of Turbomachinery, Vol. 114, no. 1, pp. 27–37, 1992. DOI: 10.1115/1.2927995 [Google Scholar]
  15. Z. Guzović, M. Baburić, and D. Matijašević, “Comparison of flow characteristics of centrifugal compressors by numerical modelling of flow, ” Journal of Mechanical Engineering, Vol. 51, no. 7-8, pp. 509–518, 2005. [Google Scholar]
  16. Ivanov, E.A., Zharkovsky, A.A., Borshchev, I.O., Svoboda, D.G. Technique for axial pump characteristics predicting in CFD package Openfoam. AIP Conference Proceedings v. 2141, #030063. (2019). DOI: 10.1063/1.5122113. [Google Scholar]
  17. R. C. Dean and Y. Senoo, “Rotating wakes in vaneless diffusers, ” Journal of Basic Engineering, Vol. 82, no. 3, pp. 563–570, 1960. DOI: 10.1115/1.3662659 [CrossRef] [Google Scholar]
  18. M. Inoue and N. A. Cumpsty, “Experimental study of centrifugal impeller discharge flow in vaneless and vaned diffusers, ” Journal of Engineering for Gas Turbines and Power, Vol. 106, no. 2, p. 455, 1984 DOI: 10.1115/1.3239588 [Google Scholar]
  19. Pospelov, A.Y., Zharkovskii, A.A. Effect of the Parameters of a Computational Model on the Prediction of Hydraulic Turbine Characteristics. (2015) Power Technology and Engineering, 49 (3), pp. 159-164. [CrossRef] [Google Scholar]
  20. A.M. Simonov. Efficiency research and optimal design of high-pressure centrifugal compressor stages. P. 164 188. / Proceedings of the Scientific School of Compressor Engineering SPbSPU. Under the editorship of Professo Yu.B. Galerkin. Publishing house SPbSPU, SPb, 2010 670 p. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.