Open Access
| Issue |
E3S Web Conf.
Volume 162, 2020
The 4th International Conference on Power, Energy and Mechanical Engineering (ICPEME 2020)
|
|
|---|---|---|
| Article Number | 02003 | |
| Number of page(s) | 5 | |
| Section | Material Structure Design and Performance Analysis | |
| DOI | https://doi.org/10.1051/e3sconf/202016202003 | |
| Published online | 07 April 2020 | |
- Gartner, “Hype Cycle for 3D Printing,” (2018) [Google Scholar]
- Wohler, “Wohlers Report,” (2018) [Google Scholar]
- M. Gebler, A. J. M. Schoot Uiterkamp, and C. Visser, “A global sustainability perspective on 3D printing technologies,” Energy Policy, vol. 74, no. C, pp. 158–167, (2014) [Google Scholar]
- G. C. Dumitrescu and I. A. T. Ă. Nase, “3D Printing – A New Industrial Revolution,” Knowl. Horizons. Econ., vol. 8, no. 1, pp. 32–39, (2016) [Google Scholar]
- M. Attaran, “The rise of 3-D printing: The advantages of additive manufacturing over traditional manufacturing,” Bus. Horiz., vol. 60, no. 5, pp. 677–688, (2017) [Google Scholar]
- C. Weller, R. Kleer, and F. T. Piller, “Economic implications of 3D printing: Market structure models in light of additive manufacturing revisited,” Int. J. Prod. Econ., vol. 164, pp. 43–56, (2015) [Google Scholar]
- J. Y. Lee, J. An, and C. K. Chua, “Fundamentals and applications of 3D printing for novel materials,” Appl. Mater. Today, vol. 7, pp. 120–133, (2017) [Google Scholar]
- Y. Huang, M. C. Leu, J. Mazumder, and A. Donmez, “Additive manufacturing: Current state, future potential, gaps and needs, and recommendations,” J. Manuf. Sci. Eng. Trans. ASME, vol. 137, no. 1, pp. 1–10, (2015) [CrossRef] [Google Scholar]
- Z. Ma, H. Bao, and A. P. Roskilly, “Study on solidification process of sodium acetate trihydrate for seasonal solar thermal energy storage,” Sol. Energy Mater. Sol. Cells, vol. 172, no. July, pp. 99–107, (2017) [Google Scholar]
- G. Englmair, C. Moser, S. Furbo, M. Dannemand, and J. Fan, “Design and functionality of a segmented heat-storage prototype utilizing stable supercooling of sodium acetate trihydrate in a solar heating system,” Appl. Energy, vol. 221, no. March, pp. 522–534, (2018) [Google Scholar]
- W. Fu et al., “Thermal properties and thermal conductivity enhancement of composite phase change material using sodium acetate trihydrate– urea/expanded graphite for radiant floor heating system,” Appl. Therm. Eng., vol. 138, no. March, pp. 618–626, (2018) [Google Scholar]
- F. Yang, G. Zhao, C. Zhou, and D. Lin, “Phase change materials (PCM) based cold source for selective freezing 3D printing of porous materials,” Int. J. Adv. Manuf. Technol., vol. 95, no. 5–8, pp. 2145–2155, (2018) [Google Scholar]
- P. A. J. Donkers, L. C. Sögütoglu, H. P. Huinink, H. R. Fischer, and O. C. G. Adan, “A review of salt hydrates for seasonal heat storage in domestic applications,” Appl. Energy, vol. 199, pp. 45–68, (2017) [Google Scholar]
- J. Pereira da Cunha and P. Eames, “Thermal energy storage for low and medium temperature applications using phase change materials A review,” Appl. Energy, vol. 177, pp. 227–238, (2016) [Google Scholar]
- P. Novotný and O. Söhnel, “Densities of Binary Aqueous Solutions of 306 Inorganic Substances,” J. Chem. Eng. Data, vol. 33, no. 1, pp. 49–55, (1988) [Google Scholar]
- B. Minofar, P. Jungwirth, M. R. Das, W. Kunz, and S. Mahiuddin, “Propensity of formate, acetate, benzoate, and phenolate for the aqueous solution/vapor interface: Surface tension measurements and molecular dynamics simulations,” J. Phys. Chem. C, vol. 111, no. 23, pp. 8242–8247, (2007) [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.