Open Access
Issue
E3S Web Conf.
Volume 170, 2020
6th International Conference on Energy and City of the Future (EVF’2019)
Article Number 01019
Number of page(s) 4
Section Energy and Management
DOI https://doi.org/10.1051/e3sconf/202017001019
Published online 28 May 2020
  1. Kore S.S., Yadav R.J. and Sane N.K., Investigations of Effect of dimple depth on heat transfer and fluid flow within rectangular channel”Procedia Engineering 125, 1110-1117(2015) [Google Scholar]
  2. Kore S.S., Patil Adik and Sane N.K., Experimental investigation of the effect of flow blockages on heat transfer and fluid friction in a round tube using wall-attached circular rings.,50,17-22(2019) [Google Scholar]
  3. Mi-Ae Moon, Min-Jung Park, Kwang-Yong Kim Evaluation of heat transfer performances of various rib shapes” International Journal of Heat and Mass Transfer, 71, 275–284 (2014) [Google Scholar]
  4. Robert Robert Kiml, Sadanari Mochizuki Akira Murata, Effects of Rib Arrangements on Heat Transfer and Flow Behaviour in a Rectangular Rib-Roughened Passage: Application to Cooling of Gas Turbine Blade Trailing Edge, Journal of Heat Transfer,123, 675-681(2001) [Google Scholar]
  5. P.R. Chandra and C.R. Alexander , J.C. Han,Heat transfer and friction behaviors in rectangular channels with varying number of ribbed walls, International Journal of Heat and Mass Transfer, 46, 481–495(2003) [Google Scholar]
  6. Hong-Min and Kwang-Yong Kim,Design optimization of rib-roughened channel to enhance turbulent heat transfer, International Journal of Heat and Mass Transfer, 47, 5159–5168(2004) [Google Scholar]
  7. R. Kamali and A.R. Binesh, The importance of rib shape effects on the local heat transfer and flow friction characteristics of square ducts with ribbed internal surfaces,International Communications in Heat and Mass Transfer 35, 1032–1040(2008) [CrossRef] [Google Scholar]
  8. Pongjet Promvonge , Chinaruk Thianpong, Thermal performance assessment of turbulent channel flows over different shaped ribs, International Communications in Heat and Mass Transfer, 35 1327–1334(2008). [CrossRef] [Google Scholar]
  9. E. Elsaadawy,H. Mortazavi M. S. Hamed, Turbulence Modeling of Forced Convection Heat Transfer in Two-Dimensional Ribbed Channels” Journal of Electronic Packaging,130,031011-1-031011-17(2008). [Google Scholar]
  10. C. Thianpong , T. Chompookham, S. Skullong, P. Promvonge “Thermal characterization of turbulent flow in a channel with isosceles triangular ribs” International Communications in Heat and Mass Transfer 36, 712–717(2009) [CrossRef] [Google Scholar]
  11. Akhilesh P. Rallabandi , Huitao Yang ,Je-Chin Han, Heat Transfer and Pressure Drop Correlations for Square Channels With 45 Deg Ribs at High Reynolds Numbers, Journal of Heat Transfer,137, 071703-1 - 071703-10(2009) [Google Scholar]
  12. Teerapat Chompookham, Chinaruk Thianpong, Sutapat Kwankaomeng, Pongjet Promvonge, Heat transfer augmentation in a wedge-ribbed channel using winglet vortex generators, International Communications in Heat and Mass Transfer, 37, 163–169(2010) [CrossRef] [Google Scholar]
  13. Huichun Liu, Jianhua Wang “Numerical investigation on synthetical performances of fluid flow and heat transfer of semiattached rib-channels” International Journal of Heat and Mass Transfer 54, 575–583(2011) [Google Scholar]
  14. Akhilesh P. Rallabandi ,Nawaf Alkhamis, Je-Chin Han,“Heat Transfer and Pressure Drop measurements for a Square Channel With 45 ° Round-Edged Ribs at High Reynolds Numbers, Journal of Turbo machinery, 133, 031019-031029(2011). [CrossRef] [Google Scholar]
  15. M. I. Mohamed, R. Hoettiba, A. M. Saif, The Effect of the Corrugation Rib Angle of Attack on the Fluid Flow and Heat Transfer Characteristics Inside Corrugated Ribbed Passage, Journal of Heat Transfer, 133, 081901-10(2011). [Google Scholar]
  16. Linqi Shui, Jianmin Gao, Xiaojun Shi,Jiazeng Liu, Effect of duct aspect ratio on heat transfer and friction in steam-cooled ducts with 60 angled rib Turbulators, Experimental Thermal and Fluid Science, 123–134(2013) [CrossRef] [Google Scholar]
  17. Gongnan Xie, Jian Liu, Weihong Zhang, Numerical Prediction of Turbulent Flow and Heat Transfer Enhancement in a Square Passage With Various Truncated Ribs on One Wall, Journal of Heat Transfer, 2014, 136,011902-1- 011902-11(2014) [Google Scholar]
  18. Mi-Ae Moon, Min-Jung Park, Kwang-Yong Kim, Evaluation of heat transfer performances of various rib shapes” International Journal of Heat and Mass Transfer, 71,275–284 (2014) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.