Open Access
Issue |
E3S Web Conf.
Volume 178, 2020
High Speed Turbomachines and Electrical Drives Conference 2020 (HSTED-2020)
|
|
---|---|---|
Article Number | 01020 | |
Number of page(s) | 7 | |
DOI | https://doi.org/10.1051/e3sconf/202017801020 | |
Published online | 09 July 2020 |
- K. Seleznev, Y. Galerkin, Centrifugal compressors (L.: mechanical engineering, 271, 1982) [Google Scholar]
- Yu. Galerkin, Turbocompressors (LTD information and publishing center KHT, Moscow, 596, 2010) [Google Scholar]
- R.H. Aungier, Centrifugal compressors: a strategy for aerodynamic design and analysis, The American Society of Mechanical Engeneers (2000) [Google Scholar]
- N.A. Cumpsty, Compressor Aerodynamics (Longman Scientific and Technical, England, 1989) [Google Scholar]
- C. Rube, T. Rossbach, M. Wedeking, D.R. Grates, P. Jeschke, Experimental and numerical investigation of the flow inside the return channel of a centrifugal process compressor, Turbine Technical Conference and Exposition, Montreal, Canada (2015) [Google Scholar]
- F.D. Bellis, E. Guidotti, D.T. Rubino, Centrifugal compressors return channel optimization by means of advanced 3D CFD, Turbine Technical Conference and Exposition, Montreal, Canada (2015) [Google Scholar]
- C. Aalburg, A. Simpson, J. Carretero, T. Nguyen, V. Michelassi, Extension of the stator vane upstream across the 180deg bend for a multistage radial compressor stage, Proceedings of ASME Turbo Expo 2009: Power for Land, Sea and Air, GT2009-59522 (8-12 June 2009) [Google Scholar]
- M. Yagi, T. Nishioka, H. Kobayashi, H. Nishida, S. Yamamoto, Effects of return channel with splitter vanes on performance of multistage centrifugal compressor, Turbine Technical Conference and Exposition, Montreal, Canada (2015) [Google Scholar]
- A. Veress, R. Van den Braembussche, Inverse design and optimization of a return channel for a multistage centrifugal compressor, Journal of Fluids Engineering 126, 799-806 (2004) [Google Scholar]
- Y. Nishida, H. Kobayashi, H. Nishida, K. Sugimura, Performance improvement of a return channel in a multistage centrifugal compressor using multiobjective optimization, Journal of Turbomachinery 135, 031026, 1–8 (2013) [Google Scholar]
- A. Hildebrant, Aerodynamic optimization of a centrifugal compressor return channel and U-turn with Genetic Algorithms, ASME Turbo Expo 2011, ASME Paper GT201145067 (2011) [Google Scholar]
- A. Hildebrandt, Numerical analysis of overall performance and flow phenomena of an automatically optimized treedimensional return channel system for multistage centrifugal compression systems, ASME Turbo Expo 2012, ASME Paper GT2012-68559 (2012) [Google Scholar]
- Yu.B. Galerkin, A.F. Rekstin, A.A. Drozdov, K.V. Soldatova, O.A. Solovyeva, E.Yu Popova, Through a system of optimal gas-dynamic design of industrial centrifugal compressors. Scientific basis, application practice, XVIII International Scientific and Technical Conference, Kazan (2019) [Google Scholar]
- V. Riess, Centrifugal compressors (1981) [Google Scholar]
- Yu.B. Galerkin, L.N. Marenina, Compressors and pneumatics 1, 30–36 (2014) [Google Scholar]
- L. Marenina, Y. Galerkin, K. Soldatova, Computational fluid dynamics application for analysis of centrifugal compressor stage stator part, International Journal of Mechanical Engineering and Robotics Research 7, 6, 656–661. DOI: 10.18178/ijmerr.7.6.656-661 (2018) [CrossRef] [Google Scholar]
- Yu.B. Galerkin, A.F. Rekstin, L.N. Marenina, K.V. Soldatova, Creation of parametrizes model of return channel flow path for CFD-researches, Oil and Gas Engineering-2020, Materials of the 10th International Scientific and Technical Conference, Omsk, 127–128 (2020) [Google Scholar]
- Y. Galerkin, K. Soldatova, Gas-dynamic process in industrial centrifugal compressors modeling, Scientific basis, stapes of development, current state, Publishing house of Polytechnic University, 327 (2011) [Google Scholar]
- Y. Galerkin, A. Rekstin, K. Soldatova, Gas dynamic design of the pipe line compressor with 90% efficiency [Electronic resource], Model test approval, International Conference on Compressors and their Systems, London, City University, UK. Available at: http://iopscience.iop.org/article/10.1088/1757-899X/90/1/012044/meta. DOI: 10.1088/1757899X/90/1/012044 (2015) [Google Scholar]
- Y. Galerkin, A. Rekstin, K. Soldatova, A. Drozdov, Gas dynamic designs of centrifugal compressors for gas industry, Specific features, ASME Gas Turbine India Conference, GTINDIA2015-1215. Available at: www.asmeconferences.org/GTIndia2015/PaperA ccepted.cfm?noToolbar=yes. DOI: 10.1115/GTINDIA2015-1215 (2015) [Google Scholar]
- Y. Galerkin, K. Soldatova, A. Drozdov, The application of mathematical models for industrial centrifugal compressor optimal design, ICCMS 2018: 10th International Con-ference on Computer Modeling and Simulation, Australia, Sydney, 008, 187–191 (2018) [Google Scholar]
- A.F. Rekstin, V.B. Semenovskiy, Y.B. Galerkin, A.A. Sokolov, The analysis of design and measured gas-dynamic characteristics of the centrifugal compressor within turboexpander aggregate, Oil and Gas Engineering (OGE-2018), AIP Conf. Proc. 2007, Omsk, 0300281–03002811. DOI: 10.1063/1.5051889 (2018) [Google Scholar]
- A. Rekstin, V. Semenovskiy, K. Soldatova, Y. Galerkin, K. Sokolov, The simulation of gasdynamic characteristics of centrifugal compressors in turbo-expander units, International Scientific and Technical Conference Smart Energy Systems, SES 2019, Kazan, E3S Web of Conferences 124, 01005. DOI: 10.1051/e3sconf/201912401008 (2019) [Google Scholar]
- P. Le Sausse, P. Fabrie, D. Arnou, F. Clunet, CFD comparison with centrifugal compressor measurements on a wide operating range, EPJ Web of Conferences 45, 01059. DOI: 10.1051/epjconf/20134501059 (2013) [CrossRef] [EDP Sciences] [Google Scholar]
- A. Borovkov, I. Voinov, Y. Galerkin, A. Nikiforov, M. Nikitin, O. Solovyeva, K. Kabalyk, Issues of gas dynamic characteristics modeling: a study on a centrifugal compressor model stage, International Scientific Conference on Energy, Environmental and Construction Engineering (EECE-2019), E3S Web Conf. 140. DOI: 10.1051/e3sconf/201914006003 (2019) [Google Scholar]
- N. Kortikov, A. Borovkov, I. Voynov, A. Kirillov, A. Drozdov, Modeling the gas-dynamic characteristics of the low-flow and mid-flow model stages for an industrial centrifugal compressor, International Scientific Conference on Energy, Environmental and Construction Engineering (EECE-2018), MATEC Web Conf. 245. DOI: 10.1051/matecconf/201824504019 (2018) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.