Study on the appearance design of horizontal polyurethane sponge cutting machine

Wenming Liu; Hao Cui

doi:10.1051/e3sconf/202017901005

All issues

Volume 179 (2020)

E3S Web Conf., 179 (2020) 01005

References

Open Access

Issue		E3S Web Conf. Volume 179, 2020 2020 International Conference on Environment and Water Resources Engineering (EWRE 2020)


Article Number		01005
Number of page(s)		4
Section		Environmental Ecology and Equipment
DOI		https://doi.org/10.1051/e3sconf/202017901005
Published online		23 July 2020

Siyi Li (2006). Modern design methods [M], xidian university press. [Google Scholar]
Li-tao Pang (2016). Research and development of special container digital design system based on Creo [J]. Journal of tianjin university. [Google Scholar]
Junpeng Li (2012). Research on complex product module planning method for mass customization [J]. Journal of hefei university of technology. [Google Scholar]
Liren Wang (2012). Modeling and structural design of horizontal foam cutting machine [J]. Journal of shenyang jianzhu university. [Google Scholar]
Fie Liu (2015). Research on appearance design of small electric vehicle [J]. Journal of xi ‘an university of technology. [Google Scholar]
Shaohua Wan (2008). Structure and process of electronic products [M]. Beijing: Beijing university of posts and telecommunications press. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.

[1] Siyi Li (2006). Modern design methods [M], xidian university press. [Google Scholar]

[2] Li-tao Pang (2016). Research and development of special container digital design system based on Creo [J]. Journal of tianjin university. [Google Scholar]

[3] Junpeng Li (2012). Research on complex product module planning method for mass customization [J]. Journal of hefei university of technology. [Google Scholar]

[4] Liren Wang (2012). Modeling and structural design of horizontal foam cutting machine [J]. Journal of shenyang jianzhu university. [Google Scholar]

[5] Fie Liu (2015). Research on appearance design of small electric vehicle [J]. Journal of xi ‘an university of technology. [Google Scholar]

[6] Shaohua Wan (2008). Structure and process of electronic products [M]. Beijing: Beijing university of posts and telecommunications press. [Google Scholar]