EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 211 (2020) E3S Web Conf., 211 (2020) 03007 References
Open Access
Issue
E3S Web Conf.
Volume 211, 2020
The 1st JESSD Symposium: International Symposium of Earth, Energy, Environmental Science and Sustainable Development 2020
Article Number 03007
Number of page(s) 10
Section Resource Sustainability
DOI https://doi.org/10.1051/e3sconf/202021103007
Published online 25 November 2020
  1. C. Zhou, Z. Chen, Mechanical properties of recycled concrete made with different types of coarse aggregate. Const. & Build. Mat. 134. 497–506. (2017) https://10.1016/j.conbuildmat.2016.12.163. [CrossRef] [Google Scholar]
  2. H. Yijie, H. Xujia, W. Qing, S. Yuedong, Mechanical properties of sea sand recycled aggregate concrete under axial compression. Const. and Build. Mat., ISSN: 0950-0618, 175, 55-63 (2018) https://DOI10.1016/j.conbuildmat.2018.04.136 [CrossRef] [Google Scholar]
  3. M. Abdullahi, Effect of Aggregate Type on Compressive Strength of Concrete. International J. of Civ. and Str. Eng. 2 (3), 791-800 (2012). [Google Scholar]
  4. Y. Cheng, C. Wensum, M. P. Thong, C. Li, C. Jian, S. Yanchao, H. Hong, Effect of aggregate size on the dynamic interfacial bond behavior between basalt fiber reinforced polymer sheets and concrete. Const. & Build. Mat, ISSN: 0950-0618, 227, 116584 (2019) https://DOI10.1016/j.conbuildmat.2019.07.310 [CrossRef] [Google Scholar]
  5. Y. Huang, X. He, H. Sun, Y. Sun, Q. Wang, Effects of coral, recycled, and natural coarse aggregates on the mechanical properties of concrete. Constr. Build. Mater.. 192, 330–347 (2018) https://DOI10.1016/j.conbuildmat.2018.10.111 [CrossRef] [Google Scholar]
  6. A. A. Jimoh, S. S. Awe, The Influence of Aggregate Size and Type on the Compressive Strength of concrete. J. of Res. Info. in Civ. Eng. 4, 2 pp.157-168 (2007) [Google Scholar]
  7. S. O. Ajamu, J. A. Ige, Influence of Coarse Aggregate type And Mixing Method On Properties of concrete Made From Natural aggregates In Ogbomoso Oyo State Nigeria, Int’l J. of Eng. and Tech., Centre of Pro. Res. Pub., 5, 7 (2015) [Google Scholar]
  8. R. Krishna, K. Rathish, B. Bala, Effect of Re-vibration on Compressive Strength of Concrete. Asian J. of Civ. Eng. 9, 3 pp.291-301 (2008). [Google Scholar]
  9. S. M. Auta, Dynamic effect of re-vibration on compressive strength of concrete. Nigerian J. of Tech. Res. 6, 2 pp.13-17 (NJTR, 2011) [Google Scholar]
  10. S. M. Auta, A. Uthman, S. Sadiku, T. Y. Tsado, J. A. Shiwua, Flexural Strength of Reinforced Revibrated Concrete Beam with Sawdust Ash as a Partial Replacement for Cement. Construction of Unique Buildings and Structures, 5, 44 pp.31-45 (2016) https://doi.10.18720/CUBS.44.3 [Google Scholar]
  11. S. M. Auta, A. Peter, S. Mohammed, Effect of Re-vibration on the Flexural Strength of Concrete Using Mahogany Sawdust Ash as a Partial Replacement for Cement. Architecture and Engineering, 5, 1 (2020) https://doi.10.23968/2500-0055-2020-5-1-03-09 [Google Scholar]
  12. Y. Hirotsugu, H. Hirotaka, S. Masashi, A. Ryo, The effectiveness of re-vibration on the bleeding and durability of concrete. Cement science and concrete technology, 71. 682-688 (2017) https://doi.org/10.14250/cement.71.682 [CrossRef] [Google Scholar]
  13. H. B. Koh, Effect of Re-vibration on the Compressive Strength and Surface Hardness of Concrete. IOP Conf. Ser.: Mater. Sci. Eng. 271, 1 (2017) https://doi.10.1088/1757-899X/271/1/012057 [Google Scholar]
  14. R. S. Zidhan, T. W. Ahmed, A. A. Mohammed, The combined effect of using recycled coarse aggregate and well water on normal concrete. SN App. Sci., 1, 8 (2019) https://doi.org/10.1007/s42452-019-0962-x [CrossRef] [Google Scholar]
  15. BS 882, Specification for aggregates from natural sources for concrete. British Standard Institute, 2 Parks, Street, London (1992) [Google Scholar]
  16. BS 12, Specification for Portland cement. British Standards Institution, 2 Parks, Street, London (1996) [Google Scholar]
  17. BS 1881 Part 108, Method for making test cubes from fresh concrete. British Standard Institute, Parks Street, London (1983). [Google Scholar]
  18. BS 1881 Part 111, Method for curing of normal concrete specimens, British Standard Institute, 2 Parks, Street, London (1983). [Google Scholar]
  19. BS 1881 Part 116, Testing concrete, a method for determination of compressive strength of concrete cubes. British Standard Institute, 2 Parks, Street, London (1983). [Google Scholar]
  20. BS 812 Part 103, Method of determination of particle size distribution, British Standard Institute, Parks Street, London (1985). [Google Scholar]
  21. BS 812 Part 109, Method for determination of moisture content of aggregates, British Standard Institute, 2Parks Street, London (1990). [Google Scholar]
  22. BS 812 Part 112, Testing aggregates. Method of determination of aggregate impact value (AIV). British Standard Institute, 2Parks Street, London (1990). BS 812 Part 2, Testing aggregates. Methods for determination of density. British Standard Institute, 2Parks Street, London (1995). [Google Scholar]
  23. BS 1881 Part 103, Method for determination of compacting factor test of concrete, British Standard Institute, 2 Parks, Street, London (1993). [Google Scholar]
  24. BS 1881 Part 102, Method for determination of slump test value of concrete, British Standard Institute, 2 Parks, Street, London (1983). [Google Scholar]
  25. BS 1881 Part 114, Method for determination of density of hardened concrete, British Standard Institute, 2 Parks, Street, London (1983). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.