Open Access
Issue |
E3S Web Conf.
Volume 212, 2020
2020 International Conference on Building Energy Conservation, Thermal Safety and Environmental Pollution Control (ICBTE 2020)
|
|
---|---|---|
Article Number | 02006 | |
Number of page(s) | 6 | |
Section | Construction | |
DOI | https://doi.org/10.1051/e3sconf/202021202006 | |
Published online | 26 November 2020 |
- A. Jäger, Verklebung von Planziegelmauerwerk mit Polyurethanklebern [Joining in masonry with polyurethane adhesives] / A. Jäger, C. Kuhlemann, E. Habian, M. Kasa, S. Lu // Mau-erwerk. – № 15. – рр. 223–231 (2011) [Google Scholar]
- E. Aldoghaim, Untersuchungen zur Verbesserung der mechanischen Eigenschaften von Mauerwerk durch Elastomerlager [Studies of the mechanical properties of masonry on elastic joints]/ E. Aldoghaim // Mauerwerk. – № 16. – pp. 93–102 (2012) [Google Scholar]
- R. Drobiec, Wplyw rodzaja zaprawy na parametry mechaniczne murow z ABK poddanych sciskaniu [Influence of the type of mortar on the mechanical characteristics of ABK masonry under compression] / R. Drobiec, R. Jasinski // Materialy Budowlane. – №4. – pp. 3–7 (2015) [Google Scholar]
- V.N. Derkach, Strength and deformability of masonry from autoclaved aerated concrete blocks on polyurethane seams. Part 1. Strength and deformability in compression / V.N. Derkach // Building materials. – No. 5. – pp. 29–33 (2017) [Google Scholar]
- V.N. Derkach, Strength and deformability of masonry from autoclaved aerated concrete blocks on polyurethane seams. Part 2. Tensile strength in bending / V.N. Derkach // Building materials. – No. 7. – pp. 30–34 (2017) [Google Scholar]
- V.N. Derkach, Strength and deformability of masonry from autoclaved aerated concrete blocks on polyurethane seams. Part 3. Strength and deformability during shear / V.N. Derkach, IE Demchuk // Building materials. – No. 8. – pp. 32–36 (2017) [Google Scholar]
- G.I. Grinfeld, Comparative tests of autoclaved aerated concrete masonry with different designs of masonry seam / G.I. Grinfeld, A.P. Kharchenko // Housing construction. – No. 11. – рр. 30–34 (2013) [Google Scholar]
- A.S. Gorshkov, Properties of wall structures made of aerated concrete products of autocuring on polyurethane glue / A.S. Gorshkov, N.I. Batting // Engineering magazine. – No. 5. рр. 5–19 (2013) [CrossRef] [Google Scholar]
- A. Glumov Laying on polyurethane compounds: how to eliminate cold bridges / A. Glumov // Building materials, equipment and technologies of the XXI century. – No. 4. – рр. 30–31 (2014) [Google Scholar]
- Test methods for masonry. Part 5. Determination of bond strength by the bending moment method: STB EN 1052-5. – Introduction. 02/10/2015 – Minsk: State Standard of the Republic of Belarus – 12 p. (2015) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.