Open Access
Issue
E3S Web Conf.
Volume 331, 2021
International Conference on Disaster Mitigation and Management (ICDMM 2021)
Article Number 05007
Number of page(s) 6
Section Structural Engineering
DOI https://doi.org/10.1051/e3sconf/202133105007
Published online 13 December 2021
  1. J.L Humar, E.W Wright, Earthquake Engineering & Structural Dynamics, 5 (1977). [Google Scholar]
  2. X.N Duan, A.M Chandler, Earthquake Engineering and Structural Dynamics, 24, 761-77 (1995) [CrossRef] [Google Scholar]
  3. C Chen, N.T.K Lam, P Mendis, The bifurcation behavior of vertically irregular buildings in low seismicity regions. In Proceeding: 12th world conference on earthquake engineering. (2000). [Google Scholar]
  4. T. L. Karavasilis, N. Bazeos, and D. E. Beskos, J. of Constructional Steel Research, 64 (6) (2008) [Google Scholar]
  5. F. Mazzolani, V. Piluso, Theory, and design of seismic resistant steel frames. London, New York: FN & SPON an Imprint of Chapman & Hall (2012) [CrossRef] [Google Scholar]
  6. AJ Kappos, SG Scott, Seismic assessment of an R/C building with setbacks using nonlinear static and dynamic analysis procedures, In Booth, editor. Seismic design practice into the next century. (1998) [Google Scholar]
  7. A Tena-Colunga, Evaluation of the seismic response of slender, setback RC moment-resisting frame buildings designed according to the seismic guidelines of a modern seismic code. In: 13th world conference on earthquake engineering, (2004) [Google Scholar]
  8. X Romão, A Costa, R Delgado, Seismic behavior of reinforced concrete frames with setbacks. In: 13th world conference on earthquake engineering, (2004) [Google Scholar]
  9. Z.A Jauhari, F. Ananda, R.A Fitrah, Comparison of the design acceleration response spectra in Riau Province between SNI 1726: 2019 and SNI 1726: 2012 methods. In Proceeding IOP Conference Series: Earth and Environmental Science, (2021) [Google Scholar]
  10. R.A Fitrah, A.P Melinda, Rang Teknik Journal, 2 (2018) [Google Scholar]
  11. R.A Fitrah, D.I Mazni, W Pratiwi, Z.A Jauhari, Seismic assessment of irregularities in steel special moment resisting frame with asymmetric-plan building (case study: Gedung D-Universitas Dharma Andalas). In Proceeding IOP Conference Series: Earth and Environmental Science, (2021) [Google Scholar]
  12. B. Budiono, E.B Wicaksono, Jurnal Teknik Sipil, 113-126 (2016) [Google Scholar]
  13. National Standardization Agency, SNI 1726-2019, Design Method of Earthquake Resistance for Buildings and Other Structures, BSN, Jakarta (2019). [Google Scholar]
  14. National Standardization Agency, SNI 1729: 2020, Requirements of Steel Structure for Building, BSN, Jakarta (2020) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.