Open Access
Issue
E3S Web Conf.
Volume 238, 2021
100RES 2020 – Applied Energy Symposium (ICAE), 100% RENEWABLE: Strategies, Technologies and Challenges for a Fossil Free Future
Article Number 09003
Number of page(s) 6
Section Batteries and Electric Storages
DOI https://doi.org/10.1051/e3sconf/202123809003
Published online 16 February 2021
  1. Shahid S, Agelin-Chaab M. Analysis of cooling effectiveness and temperature uniformity in a battery pack for cylindrical batteries. Energies 2017;10. doi:10.3390/en10081157. [Google Scholar]
  2. Ma S, Jiang M, Tao P, Song C, Wu J, Wang J, et al. Temperature effect and thermal impact in lithium-ion batteries: A review. Prog Nat Sci Mater Int 2018;28:653–66. doi:10.1016/j.pnsc.2018.11.002. [Google Scholar]
  3. Zhang SS, Xu K, Jow TR. The low temperature performance of Li-ion batteries. J Power Sources 2003. doi:10.1016/S0378-7753(02)00618-3. [Google Scholar]
  4. Jow TR, Delp SA, Allen JL, Jones J-P, Smart MC. Factors Limiting Li+Charge Transfer Kinetics in Li-Ion Batteries. J Electrochem Soc 2018;165:A361–7. doi:10.1149/2.1221802jes. [Google Scholar]
  5. Ghalkhani M, Bahiraei F, Nazri GA, Saif M. Electrochemical–Thermal Model of Pouch-type Lithium-ion Batteries. Electrochim Acta 2017. doi:10.1016/j.electacta.2017.06.164. [Google Scholar]
  6. Ohsaki T, Kishi T, Kuboki T, Takami N, Shimura N, Sato Y, et al. Overcharge reaction of lithiumion batteries. J. Power Sources, 2005. doi:10.1016/j.jpowsour.2005.03.105. [Google Scholar]
  7. Wang Q, Ping P, Zhao X, Chu G, Sun J, Chen C. Thermal runaway caused fire and explosion of lithium ion battery. J Power Sources 2012. doi:10.1016/j.jpowsour.2012.02.038. [Google Scholar]
  8. Divakaran AM, Hamilton D, Manjunatha KN, Minakshi M. Design, development and thermal analysis of reusable Li-ion battery module for future mobile and stationary applications. Energies 2020. doi:10.3390/en13061477. [CrossRef] [PubMed] [Google Scholar]
  9. Beckert W, Freytag C, Wolter M, Fauser G, Ikts F. Analysis of Electro-Thermal Hot Spot Formation in Li-Ion-Battery-Cells. COMSOL Conf 2013 User Present Batter Fuel Cells, Electrochem Process 2013. [Google Scholar]
  10. Liu G, Lu L, Fu H, Hua J, Li J, Ouyang M, et al. A comparative study of equivalent circuit models and enhanced equivalent circuit models of lithium-ion batteries with different model structures. IEEE Transp. Electrif. Conf. Expo, ITEC Asia-Pacific 2014 Conf. Proc., 2014. doi:10.1109/ITEC-AP.2014.6940946. [Google Scholar]
  11. Seaman A, Dao TS, McPhee J. A survey of mathematics-based equivalent-circuit and electrochemical battery models for hybrid and electric vehicle simulation. J Power Sources 2014. doi:10.1016/j.jpowsour.2014.01.057. [Google Scholar]
  12. Jokar A, Rajabloo B, Désilets M, Lacroix M. Review of simplified Pseudo-two-Dimensional models of lithium-ion batteries. J Power Sources 2016. doi:10.1016/j.jpowsour.2016.07.036. [Google Scholar]
  13. Prada E, Di Domenico D, Creff Y, Bernard J, Sauvant-Moynot V, Huet F. Simplified Electrochemical and Thermal Model of LiFePO 4-Graphite Li-Ion Batteries for Fast Charge Applications. J Electrochem Soc 2012. doi:10.1149/2.064209jes. [PubMed] [Google Scholar]
  14. ANSYS Inc. ANSYS Fluent Theory Guide. ANSYS Inc, USA 2015. [Google Scholar]
  15. Bernardi D, Pawlikowski E, Newman J. A general energy balance for battery systems. Electrochem. Soc. Ext. Abstr., 1984. [Google Scholar]
  16. Chen M, Rincón-Mora GA. Accurate electrical battery model capable of predicting runtime and I-V performance. IEEE Trans Energy Convers 2006. doi:10.1109/TEC.2006.874229. [Google Scholar]
  17. Liu Y, Liao YG, Lai M-C. Transient Temperature Distributions on Lithium-Ion Polymer SLI Battery. Vehicles 2019;1:127–37. doi:10.3390/vehicles1010008. [Google Scholar]
  18. Perez M, Calligaro S, Bottesi O, Renzi M. An electro-thermal model for the evaluation of the electric and thermal behaviour of a lithium-ion battery cell for automotive applications. Sustain. Dev. Energy, Water Environ. Syst., 2020. [Google Scholar]
  19. K. Ui Seong, S. Chee Burm and K. Chi-Su, “Effect of electrode configuration on the thermalbehavior of a lithium-polymer battery, ” Journal of power Sources, Vol. 180, pp. 909-916, 2008. [Google Scholar]
  20. E. Wikner and T. Thiringer, “Extending Battery Lifetime by Avoiding High SOC, ” applied sciences, Vol. 8, no. Special Issue Plug-in Hybrid Electric Vehicle (PHEV), 2018. [Google Scholar]
  21. Lin C, Wang F, Fan B, Ren S, Zhang Y, Han L, et al. Comparative study on the heat generation behavior of lithium-ion batteries with different cathode materials using accelerating rate calorimetry. Energy Procedia, 2017. doi:10.1016/j.egypro.2017.12.472. [Google Scholar]
  22. Julien C, Mauger A, Vijh A, Zaghib K. Lithium Batteries: Science and Technology. 2015. doi:10.1007/978-3-319-19108-9. [Google Scholar]
  23. S. Pontus, H. K. Maria, C. Tengstedt, G. Flodberg and G. Lingbergh, “Li-Ion Pouch Cells for Vehicle Applications—Studies of Water Transmission and Packing Materials, ” energies, Vol. 6, pp. 400-410, 2013. [Google Scholar]
  24. M. Herrmann, “Packaging Materials review, ” in AIP Conference, 2014. [Google Scholar]
  25. K. Yeow, H. Teng, M. Thelliez and E. Tan, “3D Thermal Analysis of Li-ion Battery Cells with various Geometries and Cooling Conditions Using Abaqus, ” in SIMULIA Community Conference, Providence, 2012. [Google Scholar]
  26. A. Lidbeck and K. Raza Syed, “Experimental Characterization of Li-ionBattery cells for Thermal Managementin Heavy Duty Hybrid Applications, ” Chalmers University of Technology, Gothenburg, 2017. [Google Scholar]
  27. J. Groot, “State-of -Health Estimation of Li-ion Batteries: Cycle Life Test Methods, ” Chalmers University of Technology, Göterborg, 2012. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.