Open Access
Issue
E3S Web Conf.
Volume 264, 2021
International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2021)
Article Number 05013
Number of page(s) 6
Section Engineering Materials Science, Intelligent Transport Systems and Transport Logistics
DOI https://doi.org/10.1051/e3sconf/202126405013
Published online 02 June 2021
  1. GOST 32400-2013. Side frame and bolster cast for bogies of railway carriage. Technical conditions. - Official edition. - M .: Standartinform, (2014). [Google Scholar]
  2. Senko, M.I. Pastukhov, S.V. Makeev, I.F. Pastukhov, Analysis of the causes of damage and the possibility of extending the service life of the side frames of freight railway carriage bogies, “Belarusian State University of Transport”, March 29, (2010). [Google Scholar]
  3. Savchuk V., Zobov G. Radius of break at the Council of chief designers. Railway engineering. (2). (2013). [Google Scholar]
  4. Kuleshov A.V., Lotsan E.A., Mikhalchishin S.V., Tsvik L.B., Analysis of the stress-strain state of the side frame of a bogie, Irkutsk State Transport University, pp. 18–100. [Google Scholar]
  5. Kozlov L.Ya., Kolokoltsev V.M., Vdovin K.N.. et al. / Under rd. L. Ya. Kozlov, production of steel castings, Textbook for universities, p 352, (2013). [Google Scholar]
  6. Ten E.B., Kimanov B.M., Runov O.V. Calculation of the gating system with a filtering element, Foundry of Russia, (12), p. 43–46. (2005). [Google Scholar]
  7. A Tayeb Mohammed, Fruehan Richard, Sridhar Seetharaman, Dephosphorization in the DRI-EAF Steelmaking and the Effect of Alumina, AISTech Proceedings, p. 1073–1086. (2014). [Google Scholar]
  8. Tursunov N.K., Semin A.E., Sanokulov E.A. Study of dephosphorization and desulfurization processes during steel smelting 20GL in an induction crucible furnace with further processing in a ladle using REM, Black metals, (1). p 33–40. - 2017. [Google Scholar]
  9. Tursunov N.K., Semin A.E., Sanokulov E.A. Research in laboratory conditions and an induction crucible furnace with a capacity of 6 tons of refining mode for 20GL steel in order to improve its quality, Heavy Machine Building, (1-2). p. 47–54. (2017). [Google Scholar]
  10. Solntsev Yu.P., Andreev A.K., Serditov A.E. Cold-resistant and wear-resistant casting steels. St. Petersburg: Khimizdat, p 336, (2007). [Google Scholar]
  11. L.Ya. Kozlov, V.M. Kolokoltsev, K.N. Vdovin, Production of steel castings, Textbook for universities M .: MISIS, p 352. (2005). [Google Scholar]
  12. V.М. Kolokoltsev, V.V. Bakhmetyev, K.N. Vdovin, Smelting high-quality steel for shaped casting, Textbook by. Magnitogorsk: MSTU, p 268. (2007). [Google Scholar]
  13. Shapovalov A. N. Theory of metallurgical processes. Educational and methodical manual. Novotroitsk: NF NUST MISIS, p 91. (2015). [Google Scholar]
  14. A.V. Lakedemonsky, F. S. Kvasha, Ya. I. Medvedev, Foundry defects and methods of their elimination, M.: Mashinostroenie, p 152. (1972). [Google Scholar]
  15. Sokolov G.A., Extra-furnace refining of steel. M: metallurgy, p. 208. (1977). [Google Scholar]
  16. Kolokoltsev V. M., Bakhmetyev V.V., Vdovin K.N.,Smelting of high-quality steel for shaped casting, Magnitogorsk: MSTU. p. 268. (2007). [Google Scholar]
  17. Kozlov L.Ya. Kolokoltsev V.M., Vdovin K.N., Ten E.B., Production of steel castings, Magnitogorsk: MSTU.– p 352, (2011). [Google Scholar]
  18. Ten E.B., Kimanov B.M., Kalashnikov A.I. Influence of filtration on the properties of steel treated with REM, Foundry, (12). (1989). [Google Scholar]
  19. Dobrynina A.V. Optimization of the composition of cast low-carbon steel in order to reduce the cold brittleness of castings, Abstract diss. Cand. tech. sciences. Krasnoyarsk. KSTU. p 24. (2003). [Google Scholar]
  20. Khasanov B., Vatin N., Mirzaev T., Suyunov A., Radjabov M. Physicochemical fundamentals of modifying concrete mix and concrete, IOP Conference Series: Materials Science and Engineering, 2021, 1030(1), 012022 [Google Scholar]
  21. Solntsev Yu.P., Andreev A.K., Grechin R.I. Foundry cold-resistant steels. M.: Metallurgy. p 176. (1991). [Google Scholar]
  22. Adilkhodjaev A., Hasanov B., Shaumarov S., Kondrashchenko V. Aerated concrete with predetermined pore parameters for the exterior walls of energy efficient buildings, IOP Conference Series: Materials Science and Engineering, 2021, 1030(1), 012006 [Google Scholar]
  23. Lakedemonsky A.V., Kvasha F.S., Medvedev Y.I., Casting defects and ways to eliminate them etc. M.: Engineering. p 152. (1952). [Google Scholar]
  24. Rybakov V., Jos V., Raimova I., and Kudryavtsev K. Modal analysis of frameless arches made of thin-walled steel profiles. IOP Conf. Ser. Mater. Sci. Eng. 883, (2020). [Google Scholar]
  25. Kattakulov F., Muslimov T., Khusainov A., Vokhidov O., Sultanov S. Water resource saving in irrigation networks through improving the efficiency of reinforced concrete coatings, IOP Conference Series: Materials Science and Engineering, 883(1), 012053, (2020) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.