EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 264 (2021) E3S Web Conf., 264 (2021) 05047 References
Open Access
Issue
E3S Web Conf.
Volume 264, 2021
International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2021)
Article Number 05047
Number of page(s) 6
Section Engineering Materials Science, Intelligent Transport Systems and Transport Logistics
DOI https://doi.org/10.1051/e3sconf/202126405047
Published online 02 June 2021
  1. Huang W., On the selection of shape memory alloys for actuators, Mater. Design 23 (1) p. 9–11 (2002). [Google Scholar]
  2. Leary M., Huang S., Ataalla T., Baxter A., Subic A., Design of shape memory alloy actuators for direct power by an automotive battery, Mater. Design 43, p. 460–466. (2013) [Google Scholar]
  3. V. Brailovski, S. Prokoshkin, K. Inaekyan, V. Demers. Functional properties of nanocrystalline, submicrocrystalline and polygonized Ti-Ni alloys processed by cold rolling and post-deformation annealing. Journal of Alloys and Compounds V. 509 (5). pp. 2066–2075. (2011). [Google Scholar]
  4. K. Inaekyan, V. Brailovski, S. Prokoshkin, A. Korotitskiy, A. Glezer Characterization of amorphous and nanocrystalline Ti-Ni-based shape memory alloys. Journal of Alloys and Compounds, .473, Issue (1-2), pp.71–78. (2009). [Google Scholar]
  5. K. Polyakova, E. Ryklina, S. Prokoshkin. Thermomechanical response of titanium nickelide on austenite grain/subgrain size Materials Today: Proc. Pp 4836−4840. (2017). [Google Scholar]
  6. K.A. Polyakova-Vachiyan, E.P. Ryklina, S.D. Prokoshkin, S.M. Dubinskii. Dependence of the Functional Characteristics of Thermomechanically Processed Titanium Nickelide on the Size of the Structural Elements of Austenite. Phys. Met. Metallogr. 117 (8) pp 817−827. (2016). [Google Scholar]
  7. S.D. Prokoshkin, V. Brailovski, K.E. Inaekyan, V. Demers, I.Yu. Khmelevskaya, S.V. Dobatkin, E.V. Tatyanin. Structure and properties of severely cold-rolled and annealed Ti–Ni shape memory alloys Mater. Sci. Eng. A pp. 114–118. (2008) [Google Scholar]
  8. I.Yu. Khmelevskaya, S.D. Prokoshkin, V. Brailovski, K.E. Inaekyan, V. Demers, I.B. Gurtovaya, A.V. Korotitskiy, S.V. Dobatkin. Functional properties of Ti–Ni based shape memory alloys. Advances in Science and Technology V. (59) pp. 156−161. (2008). [Google Scholar]
  9. V. Brailovski, S. Prokoshkin, I. Khmelevskaya, K. Inaekyan, V. Demers, S. Dobatkin, E. Tatyanin. Interrelations between the properties and structure of thermomechanically treated equiatomic Ti–Ni alloy. Mater. Sci. Eng. A V. pp. 597–601. (2006) [Google Scholar]
  10. X. Wang, S. Kustov, B. Verlinden, J. V. Humbeeck. Fundamental Development on Utilizing the R-phase Transformation in NiTi Shape Memory Alloys. Shape Mem. Superelasticity V. 1. № (2). pp 231–239. (2015). [Google Scholar]
  11. M.S. Shakeri, J. Khalil-Allafi, V. Abbasi-Chianeh, Arash Ghabchi. The influence of Ni4Ti3 precipitates orientation on two-way shape memory effect in a Ni-rich NiTi alloy. JALCOM 485 pp. 320–323. (2009) [Google Scholar]
  12. Ching-Yig Chang, David Vokoun, and Chen-Ti Hu. Two-way shape memory effect of NiTi alloy induced by constraint aging treatment at room temperature, Metallurgical and Materials Transactions a. V. (32). July (2001) pp. 1629 – 1634. (2001). [Google Scholar]
  13. X.L. Meng, W. Cai, Y.D. Fu et al. Shape-memory behaviors in an aged Ni-rich TiNiHf high temperature shape-memory alloy. Intermetallics (16) pp 698–705. (2008). [Google Scholar]
  14. Z. Wang, X. Zu, X. Feng, J. Dai. Effect of thermomechanical treatment on the two-way shape memory effect of NiTi alloy spring. Materials Letters (554) pp. 55–61. (2002) [Google Scholar]
  15. E.P. Ryklina, S.D. Prokoshkin, A.Y. Kreytsberg. Abnormally high recovery strain in Ti-Ni-based shape memory alloys. Journal of Alloys and Compounds 577 pp 255−258. (2013) [Google Scholar]
  16. 1. Adilkhodjaev, A., Shaumarov, S., Kadir, U. New structure assessment method cell concrete. International Journal of Advanced Science and Technology, 29 (5), pp. 1889–1893. (2020) [Google Scholar]
  17. 8. Shaumarov S.S., Adilhodzhaev A.I., Shipacheva E.V., Kandkhorov S.I. Development of New Constructive and Heat-Insulating Materials. International Journal of Recent Technology and Engineering (IJRTE). ISSN: 2277-3878. 7. Issue-(5). pp. 577–580. (2019) [Google Scholar]
  18. 7. Shaumarov S.S., Adilhodzhayev A.I., Kondrazhenko V.I. Experimental research of structural organization of heat-insulating structural building materials for energy efficient buildings. XXII International Scientific Conference on Advanced In Civil Engineering «Construction the formation of living environment», pp. 1–7 (2019) [Google Scholar]
  19. 5. Adilhodzhaev A.I., Shaumarov S.S., Makhamataliev I.M., Tsoy V.M. Features Of Forming The Structure Of Cement Concrete On Second Crushed Stone From Concrete Scrap, International Journal of Advanced Science and Technology 29, No. (5), pp. 1901–1906.(2020). [Google Scholar]
  20. 3. Adilhodzhayev, A., Shaumarov, S., Shipacheva, E., Shermuhamedov, U. New method for diagnostic of heat engineering and mechanical properties of cellular concrete, International Journal of Engineering and Advanced Technology (IJEAT) ISSN: 2249 – 8958, Volume 9 Issue (1), October 2019. – pp. 6885–6887. (2019). [Google Scholar]
  21. Adilhodzhayev A. I., Shaumarov S.S., Umarov K.S. New Structure Assessment Method Cell Concrete, International Journal of Advanced Science and Technology. 29, (5), pp. 1889–1893. (2020). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.