EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 264 (2021) E3S Web Conf., 264 (2021) 05050 References
Open Access
Issue
E3S Web Conf.
Volume 264, 2021
International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2021)
Article Number 05050
Number of page(s) 7
Section Engineering Materials Science, Intelligent Transport Systems and Transport Logistics
DOI https://doi.org/10.1051/e3sconf/202126405050
Published online 02 June 2021
  1. Ushakov B.I., Danilov E.I., Egorov V.M. Prospects for the development of equipment for concrete and mortar works. Proceedings of TSNIITE Stroymash. Issue (112) M, p 129, (1999). [Google Scholar]
  2. Slesarev Yu.M. Preparation of concrete mix and mortar. Proceedings of TSNIITE Stroymash. Issue (109) M, p 133, (1998) [Google Scholar]
  3. Popov V.V. The pump for viscous and inhomogeneous liquids, Inventor's certificate No. 1399500 BI No. 20 dated 05/30/88. [Google Scholar]
  4. Strekalov V.E. Pump for pumping viscous and inhomogeneous liquids, Copyright certificate No. 909281 BI No. 8 dated 02.28.82. [Google Scholar]
  5. Nizamiev F.Kh. Pump for pumping viscous liquids, Inventor's certificate No. 1525304 BI No. 44 dated 30.11.89. [Google Scholar]
  6. Boyko NV, et al. Concrete pump, Copyright certificate No. 558108 BI. No. 18 dated 05.15.77. [Google Scholar]
  7. Glebov V.V. Piston pump, Inventor's certificate No. 510586 BI No. 14 dated 04.15.76. [Google Scholar]
  8. Alimov B.M., Urazkeldiev A.B., Edylbaev U. Kinematic study of the rocker mechanism for driving the working body of a piston pump for viscous and inhomogeneous liquids, Magazine “Young Scientist” 9 (68), June 2014 Russia. (2014). [Google Scholar]
  9. Alimov B.M., Urazkeldiev A.B., Edylbaev U. The use of a rocker mechanism to drive the working body of a piston pump, Magazine “Young Scientist” 9 (68), June 2014 Russia, (2014). [Google Scholar]
  10. Prabhakar V. Pawar, Kulkarni P.R. International Journal of Mechanical Engineering and Information Technology, 3. (3). March 2015. pp. 1067–1073, (2015). [Google Scholar]
  11. Tristan M. Ericson, Robert G. Parker, “Experimental measurement of the torque on dynamic behavior and system parameters of planetary gears” MMT 74 (2014), pp. 370–389. [Google Scholar]
  12. Shyi-Jeng Tsai, Guan-Lin Huang, Siang-Yu Ye “Gear meshing analysis of planetary gear sets with a floating sun gear” Mechanism and Machine Theory (2014)VAMT-02278. [PubMed] [Google Scholar]
  13. Alexander Kapelevich “High Gera Ratio Epicyclic Drives Analysis” GEAR TECHNOLOGY / June 2014 pp. 61–67. (2014) [Google Scholar]
  14. D.R. Salgado, J.M. del Castillo “Analysis of the transmission ratio and efficiency ranges of the four-, five-, and six-link planetary gear trains” MMT-73, pp. 218–243. (2014) [Google Scholar]
  15. Bernd-Robert Hohn, Karsten Stahl and Philipp Gwinner “Light-Weight Design for Planetary Gear Transmissions” GEAR TECHNOLOGY, Sept. 2013 pp. 96–103. (2013) [Google Scholar]
  16. Cheon-Jae Bakh, Robert G. Parker “Analytical investigation of tooth profile modification effects on planetary gear dynamics” Mechanism and Machine Theory (70). pp. 298–319. (2013). [Google Scholar]
  17. Syed Ibrahim Dilawer, Md. Abdul Raheem Junaidi, Dr. S. Nawazish Mehdi “Design, Load Analysis and Optimization of Compound Epicyclic Gear Trains” American Journal of Engineering Research ISSN 2320-0936 (02), Issue-10, pp. 146–153.(2013). [Google Scholar]
  18. Nehad Marjanovic, Biserka Isailovic, Vesna Marjanovic, Zoran Milojevic, Mirko Blagojevic, Milorad Bojic, “A practical approach to the optimization of gear trains with spur gears” Mechanism and Machine Theory 53 pp. 1–16. (2012) [CrossRef] [Google Scholar]
  19. Jelena Stefanovic-Marinovic and Milos Milovancevic “Load Allocation and Equilibrium for Planetary Gear Reducers of Earth-Pressure-Balance Shield Machine” Journal of Engineering and Automation 2 pp. 365–373. (2012). [Google Scholar]
  20. Juraj Jablonick Lubom Huj, Zdenko Tkc, J. Kosiba, “3D Model of the Differential Planetary Gear and the Kinematic and Force Analysis” HTHPY-2012, том 51 pp. 171–181. (2012). [Google Scholar]
  21. Wen-Hsiang Hsiehl, Shoa-Jui Chen “Innovative Design of Cam-Controlled Planetary Gear Trains” International Journal of Engineering and Technology Innovation, 1, (1), pp. 1–11.(2011) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.