Open Access
Issue |
E3S Web Conf.
Volume 268, 2021
2020 6th International Symposium on Vehicle Emission Supervision and Environment Protection (VESEP2020)
|
|
---|---|---|
Article Number | 01027 | |
Number of page(s) | 11 | |
DOI | https://doi.org/10.1051/e3sconf/202126801027 | |
Published online | 11 June 2021 |
- Johnson, T. and Joshi, A., Review of Vehicle Engine Efficiency and Emissions. SAE Technical Paper 2018-01-0329, 2018 [Google Scholar]
- Nakamura K., Vlachos N., Konstandopoulos A., et al. Performance improvement of diesel particulate filter by layer coating[C]. SAE Technical Paper 2012-01-0842, 2012. [Google Scholar]
- Konstandopoulos A.G., Kostoglou M., Skkaperdas E., et al., Fundamental studies of desel particulate filters: transient loading, regeneration, and aging[C], SAE Technical Paper 2000-01-1016, 2000. [Google Scholar]
- Khair M.K. A review of diesel particulate filter technologies. In: Future Transportation Technology Conference & Exposition. SAE International; 2003-01-2303, 2003 [Google Scholar]
- Surenhalli H.S., Premchand K., Johnson J.H., et al. Modeling study of active regeneration of a catalyzed particulate filter using one-dimensional DOC and CPF models[R]. SAE Technical Paper, 2011. [Google Scholar]
- Lepreux O., Creff Y., Petit N. Warm-up strategy for a diesel oxidation catalyst[C]//Control Conference (ECC), 2009 European. IEEE, 2009: 3821–3826. [CrossRef] [Google Scholar]
- Lepreux O. Model-based temperature design of a diesel oxidation catalyst [D]. Paris: MINES ParisTech, 2009. [Google Scholar]
- Song X., Surenahalli H., Naber J., et al. Experimental and modeling study of a diesel oxidation catalyst (DOC) under transient and CPF active regeneration conditions[R]. SAE Technical Paper, 2013. [Google Scholar]
- Lepreux O., Creff Y., Petit N. Model-based temperature control of a diesel oxidation catalyst[J]. Journal of Process Control, 2012, 22(1): 41–50. [CrossRef] [Google Scholar]
- Koltsakis G.C., Stamatelos A.M. Modeling dynamic phenomena in 3-way catalytic converters. Chemical Engineering Science 1999;54(20):4567–4578. [CrossRef] [Google Scholar]
- Tang, T., Cao, D.X., Zhang, J., Zhao, Y.G., Shuai, S.J., 2014. Experimental Study of Catalyzed Diesel Particulate Filter with Exhaust Fuel Injection System for Heavy-duty Diesel Engines. SAE Technical Paper 2014-01-1496, 2014. [Google Scholar]
- Lepreux O., Creff Y., Petit N. Model-based control design of adiesel oxidation catalyst. IFAC Proceedings Volumes 2009;42(11):279–284. [Google Scholar]
- Harned J. Analytical evaluation of a catalytic converter system[C]. SAE Technical Paper 720520, 1972 [Google Scholar]
- H. Mohammed. The Filtration and Oxidation Characteristics of a Diesel Oxidation Catalyst and a Catalyzed Particulate Filter: Development of a 1-D 2- Layer Model[D]. MichiganTechnological University, 2005. [Google Scholar]
- Ozisik M.N. Inverse heat transfer: fundamentals and applications [M]. CRC Press, 2000. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.