Open Access
Issue
E3S Web Conf.
Volume 272, 2021
2021 International Conference on Environmental Pollution and Governance (ICEPG 2021)
Article Number 02003
Number of page(s) 5
Section Environmental Governance and Solid Waste Treatment and Resource Utilization
DOI https://doi.org/10.1051/e3sconf/202127202003
Published online 14 June 2021
  1. Ma Y, Zhang J, Wang L and Liu Y 2013 Probabilistic prediction with Bayesian updating for strength degradation of RC bridge beams Struct. Saf. 44 102-109 [Google Scholar]
  2. Tondolo F 2015 Bond behaviour with reinforcement corrosion Constr. Build. Mater. 93 926-932 [CrossRef] [Google Scholar]
  3. Melo J, Rossetto T and Varum H 2015 Experimental study of bond–slip in RC structural elements with plain bars Mater. Struct. 48 8 2367-2381 [Google Scholar]
  4. Haskett M, Oehlers D and Ali M 2008 Local and Global Bond Characteristics of Steel Reinforcing Bars Eng. Struct. 30 2 376-383 [Google Scholar]
  5. Shima H, Chou L and Okamura H 1987 Micro and macro models for bond in reinforced concrete J. Fac. Eng. 39 2 133-194 [Google Scholar]
  6. Xu Y 1997 Simplified Model for the Bond-slip Constitutive Relation of Reinforced Concrete Eng. Mech. A02 34-38 (in Chinese) [Google Scholar]
  7. China Association for Engineering Construction Standardization 2010 Code for design of concrete structures 50010 (Beijing: China Planning Press) (in Chinese) [Google Scholar]
  8. Wang X and Liu X 2004 Modeling bond strength of corroded reinforcement without stirrups Cem. Concr. Res. 34 8 1331-1339 [CrossRef] [Google Scholar]
  9. Xu Y 1990 Experimental study of anchorage properties for deformed bars in concrete (Beijing: Tsinghua university press) (in Chinese) [Google Scholar]
  10. Ngo D and Scordelis A 1967 Finite element analysis of reinforced concrete beams ACI. Struct. J. 64 152-163 [Google Scholar]
  11. Richard B, Ragueneau F, Cremona C, Adélaide L and Tailhan J 2010 A three-dimensional steel/concrete interface model including corrosion effects Eng. Fract. Mech. 77 6 951-973 [CrossRef] [Google Scholar]
  12. Rezazadeh M, Carvelli V and Veljkovic A 2017 Modelling bond of GFRP rebar and concrete Constr. Build. Mater. 153 102-116 [CrossRef] [Google Scholar]
  13. Dehestani M and Mousavi S 2015 Modified steel bar model incorporating bond-slip effects for embedded element method Constr. Build. Mater. 81 284-290 [CrossRef] [Google Scholar]
  14. Berra M, Castellani A, Coroneli D, Zanni S and Zhang G 2003 Steel-concrete bond deterioration due to corrosion: finite-element analysis for different confinement levels Mag. Concrete. Res. 55 3 237-247 [CrossRef] [Google Scholar]
  15. Ma Y, Guo Z, Wang L and Zhang J 2017 Experimental investigation of corrosion effect on bond behavior between reinforcing bar and concrete Constr. Build. Mater. 152 240-249 [CrossRef] [Google Scholar]
  16. Xu Y L, Shen W and Wang H 1994 An experimental study of bond-anchorage properties of bars in concrete J. Arch. Struct. 15 3 26-36 [Google Scholar]
  17. Huang Y, Yang Z, Chen X and Liu G 2016 Monte Carlo simulations of meso-scale dynamic compressive behavior of concrete based on X-ray computed tomography images Int. J. Impact. Eng. 97 102-115 [CrossRef] [Google Scholar]
  18. Yan P, Zhang J, Fang Q, Zhang Y and Fan J 2016 3D numerical modelling of solid particles with randomness in shape considering convexity and concavity Powder. Technol. 301 131-140 [Google Scholar]
  19. Zheng J, Li C and Jones M 2003 Aggregate distribution in concrete with wall effect Mag. Concrete. Res. 55 3 257–265 [CrossRef] [Google Scholar]
  20. Du X, Jin L and Ma G 2014 Numerical simulation of dynamic tensile-failure of concrete at meso-scale Int. J. Impact. Eng. 66 5-17 [CrossRef] [Google Scholar]
  21. Lee J and Fenves G 1998 Plastic-damage model for cyclic loading of concrete structures ASC E. J. Eng. Mech. 124 8 892-900 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.