Open Access
Issue |
E3S Web Conf.
Volume 272, 2021
2021 International Conference on Environmental Pollution and Governance (ICEPG 2021)
|
|
---|---|---|
Article Number | 02028 | |
Number of page(s) | 5 | |
Section | Environmental Governance and Solid Waste Treatment and Resource Utilization | |
DOI | https://doi.org/10.1051/e3sconf/202127202028 | |
Published online | 14 June 2021 |
- Abdulraheem M S and Kadhum M M 2018 Experimental investigation of fire effects on ductility and stiffness of reinforced reactive powder J. Build. Eng. 20 750-61 [CrossRef] [Google Scholar]
- Martins A M B and Rodrigues J P C 2010 Fire resistance of reinforced concrete columns with elastically restrained thermal elongation Eng. Struct. 32 10 3330-7 [Google Scholar]
- Huo J, Zhang J, Wang Z and Xiao Y 2013 Effects of sustained axial load and cooling phase on post-fire behaviour of reinforced concrete stub columns Fire Safety J. 59 7 76-87 [Google Scholar]
- Kodur V K R, Wang T C and Cheng F P 2004 Predicting the fire resistance behavior of high strength concrete columns Cem. Concr. Compos. 26 2 141-53 [Google Scholar]
- Kodur V and Raut N 2012 A simplified approach for predicting fire resistance of reinforced concrete columns under biaxial bending Eng. Struct. 41 42843 [Google Scholar]
- Nguyen T T and Tan K H 2014 Thermal-induced restraint forces in reinforced concrete columns subjected to eccentric loads Fire Safety J. 69 136-46 [CrossRef] [Google Scholar]
- Grondin F and Matallah M 2014 How to consider the interfacial transition zones in the finite element modelling of concrete Cem. Concr. Res. 58 67-75 [CrossRef] [Google Scholar]
- Huang Z 2010 Modelling the bond between concrete and reinforcing steel in a fire Eng. Struct. 32 11 3660-9 [Google Scholar]
- European Committee for Standardization 2004 Eurocode 2: Design of Concrete Structures-Part 12: General Rules-Structural Fire Design (Brussels: Belgium) [Google Scholar]
- Khan M I 2002 Factors affecting the thermal properties of concrete and applicability of its prediction models Build. Environ. 37 6 607-14 [Google Scholar]
- Vosteen H and Schellschmidt R 2003 Influence of temperature on thermal conductivity, thermal capacity and thermal diffusivity for different types of rock Phys. Chem. Earth. 28 9 499-509 [CrossRef] [Google Scholar]
- Černý R, Maděra J, Poděbradská J, Toman J, Drchalová J, et al. 2000 The effect of compressive stress on thermal and hygric properties of Portland cement mortar in wide temperature and moisture ranges Cem. Concr. Res. 30 8 1267-76 [CrossRef] [Google Scholar]
- China Association for Engineering Construction Standardization 2006 Technical Code for Fire Safety of Steel Structure in Buildings (Beijing: China Planning Press) (in Chinese) [Google Scholar]
- Lubliner L, Ollivier J, Oller S and Onate E 1989 A plastic-damage model for concrete Int. J. Solids Struct. 25 3 299-326 [CrossRef] [Google Scholar]
- Huang Y, He X, Sun H, Sun Y and Wang Q 2018 Effects of coral, recycled and natural coarse aggregates on the mechanical properties of concrete Constr. Build. Mater. 198 330-47 [CrossRef] [Google Scholar]
- Ministry of Housing and Urban-Rural Development of the People’s Republic of China 2010 Code for Design of Concrete Structures (Beijing: China Architecture & Building Press) (in Chinese) [Google Scholar]
- Khaliq W and Taimur 2018 Mechanical and physical response of recycled aggregates high- strength concrete at elevated temperatures Fire Safety J. 96 203-14 [CrossRef] [Google Scholar]
- Wu B 2003 Mechanical properties of reinforced concrete structures after fire (Beijing: Science Press) (in Chinese) [Google Scholar]
- Ergün A, Kürklü G and Başpınar M S 2016 The effects of material properties on bond strength between reinforcing bar and concrete exposed to high temperature Constr. Build. Mater. 112 691-8 [CrossRef] [Google Scholar]
- International Organization for Standardization 1999 Fire-Resistance tests-Elements of Building Construction, Part 1: General Requirements (Geneva: Switzerland) [Google Scholar]
- Zhang J, Chen J, Huo J, Li S and Cai Z 2017 Experimental study of the effect of fire mode on axial compression mechanical properties of RC after exposure to entire fire process J Exp. Mech. 1 32 70-8 (in Chinese) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.