Open Access
Issue
E3S Web Conf.
Volume 280, 2021
Second International Conference on Sustainable Futures: Environmental, Technological, Social and Economic Matters (ICSF 2021)
Article Number 03001
Number of page(s) 7
Section Sustainable Building and Architecture
DOI https://doi.org/10.1051/e3sconf/202128003001
Published online 30 June 2021
  1. EN 12716:2001 Execution of special geotechnical works. Jet grouting. [Google Scholar]
  2. G. Miki, Soil improvement by jet grouting, in Proc. 3rd Int. GSSIM, (Singapore, 1985), pp. 45–52. [Google Scholar]
  3. G. Miki, W. Nakanishi, Technical progress of jet grouting method and its newest type (PICSSRR, Paris, 1984), pp. 195–200 [Google Scholar]
  4. J. Morey, D.W. Campo, Quality control of jet grouting on the Cairo metro. Gr. Imp. 3 (2), 67–75 (1999). doi:10.1680/gi.1999.030203 [Google Scholar]
  5. M. Shibazaki, State of practice of jet grouting. Geotechnical Special Publication No. 120: GGT. 1, 198–217 (2003) [Google Scholar]
  6. M. Shibazaki, M. Yokoo, H. Yoshida, Development oversized Jet Grouting, in GGT. Proceedings of the Third International Conference, vol. 1 (1999), pp. 294–302 [Google Scholar]
  7. J.L. Kauschinger, E.B. Perry, R. Hankour, Jet grouting: state-of-the-practice. ASCE Geotech. Spec. Publ. 1(30), 169–181 (2003) [Google Scholar]
  8. J.L. Kauschinger, R. Hankour, E.B. Perry, Methods to estimate composition of Jet Grout bodies. ASCE Geotech 1 (30), 194–205 (2004) [Google Scholar]
  9. A.L. Bell, Jet grouting. Ground Improvement, ed. by M.P. Moseley (Blackie, 1993), p. 218 [Google Scholar]
  10. C.S. Covil, A.E. Skinner, Jet grouting: a review of some of the operating parameters that form the basis of the jet grouting process (Thomas Telford, London, 1994), p. 649 [Google Scholar]
  11. P. Croce, A. Flora, Analysis of single-fluid. JGG 50 (6), 739–748 (2000) [Google Scholar]
  12. P. Сroce, A. Flora, G. Modoni, Jet Grouting. Technology (CRC Press Taylor & Francis Group, New York, 2014), p. 298. [Google Scholar]
  13. H. Vleeschauwer, G. Maertens, Jet grouting: State of the art in Belgium, in Proceedings of the Conference ‘Grouting–Soil improvement– Geosystem including reinforcement’, FGS, (Helsinki, 2000), pp. 145–156 [Google Scholar]
  14. J. Morey, F. Mathieu, Le procédé “JetPlus” optimise le jet grouting (SIS l’Amélioration des Sols en Place, Paris, 2004), pp. 245–261 [Google Scholar]
  15. H. Imanishi, Y. Yamauchi, Ground behavior during soil imprivement by Jey Grouting. GDM, 133-136 (1996) [Google Scholar]
  16. I. Korobiichuk, V. Korobiichuk, P. Hájek, P. Kokeš, A. Juś, R. Szewczyk, Investigation of leznikovskiy granite by ultrasonic methods. AM. Sc. 63(1), 75–82 (2018). doi:10.24425/118886 [Google Scholar]
  17. V. Korobiichuk, Study of ultrasonic characteristics of Ukraine red granites at low temperatures. AISC 543, 653–658 (2017). doi:10.1007/978-3-319-48923-0_69 [Google Scholar]
  18. V. Korobiichuk, V. Kravets, R. Sobolevskyi, A. Han, V. Vapnichna, Weakening of rock strength under the action of cyclic dynamic loads. EEJET 2 (5-92), 20–25 (2018). doi:10.15587/1729-4061.2018.127847 [Google Scholar]
  19. O. Terentiev, K. Tkachuk, O. Tverda, A. Kleshchov, Mathematical model of the reverse water post purification at mining enterprises when using electromagnetic focusing of contaminants. EEJET 1 (10-91), 11–16 (2018). doi:10.15587/1729-4061.2018.122000 [Google Scholar]
  20. O. Terentiev, K. Tkachuk, O. Tverda, A. Kleshchov, Electromagnetic focusing of impurities in water purification. EEJET 4 (10- 82), 10–15 (2016). doi:10.15587/1729-4061.2016.75251 [Google Scholar]
  21. R. Sobolevskyi, I. Korobiichuk, M. Nowicki, R. Szewczyk, V. Shlapak, Spatial Modeling of the Influence of Mining-Geometric Indices on the Efficiency of Mining. AMS 62 (4), 857–869 (2017). doi:10.1515/amsc-2017-0059 [Google Scholar]
  22. C. Dogruoz, O. Tolkach, R. Sobolevskyi, A. Nieto, Investigation of pyrophyllite deposits using multifactorial modeling method and complex quality index in Ukraine. EES 76 (23), 784 (2017). doi:10.1007/s12665-017-7153-0 [Google Scholar]
  23. S. Markov, M. Tyulenev, O. Litvin, E. Tyuleneva, Innovative numerical modelling of technogenic rock arrays structure. E3S Web of Conferences 15, 01011 (2017). doi:10.1051/e3sconf/20171501011 [CrossRef] [EDP Sciences] [PubMed] [Google Scholar]
  24. S. Kravets, V. Suponyev, O. Rieznikov, F. Kosyak, D. Klets, O. Chevychelova, Determination of the resistance of the cylindrical-tubular drill for trenchless laying of underground communications. EEJET 3 (7-93), 64–70 (2018). doi:10.15587/1729-4061.2018.131838 [Google Scholar]
  25. Y. Malanchuk, V. Korniienko, L. Malanchuk, V. Zaiets, Research into the moisture influence on the physical-chemical tuff-stone characteristics in basalt quarries of the Rivne- Volyn region. E3S Web of Conferences 201, 01036 (2020) [CrossRef] [EDP Sciences] [Google Scholar]
  26. N.I. Stupnik, S.O. Popov, V.A. Azaryan, F.I. Karamanits, Research of parameters of development of deformation processes in underground excavations, using an automated laser scanning systems. GZ 5, 70–73 (2014) [Google Scholar]
  27. V.P. Krasnov, T.V. Kurbet, I.V. Davydova, Z.M. Shelest, O.V. Zhukovsky, I.D. Ivanyuk, Dynamics of Cs content in the bark of frangula alnus mill, in the forests of Ukrainian Polissia. NPAE 19 (3), 258–264 (2018) [Google Scholar]
  28. H. Kanematsu, High pressure jet grouting method. CConst. 21 (13), 136–147 (1980) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.