Open Access
Issue |
E3S Web Conf.
Volume 280, 2021
Second International Conference on Sustainable Futures: Environmental, Technological, Social and Economic Matters (ICSF 2021)
|
|
---|---|---|
Article Number | 05014 | |
Number of page(s) | 7 | |
Section | Sustainable Energy | |
DOI | https://doi.org/10.1051/e3sconf/202128005014 | |
Published online | 30 June 2021 |
- O. Sinchuk, Yu. Filipp, M. Maksimov, R. Zaytsev, The effects of adjustable electric drives of mine hoisting equipment on the electricity quality in the power supply circuits, Electromechanical and energy saving systems, Kremenchuk Mykhailo Ostrohradskyi National University, 1, 49–55 (2017) [Google Scholar]
- I. Sinchuk, E. Guzov, A. Yalovaya, S. Boyko, Potential of electric power efficiency and ways of its implementation in production sectors with underground methods of iron ore extraction, P.H. Shcherbatykh A.V., Kremenchuk (2015), p. 296 [Google Scholar]
- L. Datskovskiy, V. Rogovoy, Electric drive of mine stationary equipment, Electrical machine building and electrical equipment, Odessa, 66, 94–102 (2010) [Google Scholar]
- V. Litvak, G. Markman, N. Harlov, Energy saving and electric power quality, Tomsk (2005), p. 157 [Google Scholar]
- O. Bilous, A. Saghizov, Mathematical modeling of the impact of direct frequency converter operation on the power supply circuit, Bulletin of Perm National Research Polytechnic University, Electrical Engineering, Information Technology, Control Systems, 8, 106–113 (2013) [Google Scholar]
- L. Datskovskiy, V. Rogovoy, I. Kuznetsov, Electric drives of modern mine hoisting machines, Bulletin of Tula State University. Engineering sciences, 3, 157–165 (2010) [Google Scholar]
- A. Chermalykh, A. Danilin, A. Bosak, A. Petruchenko, Reference-model combined operation of mine hoisting installation’s positioning electric drive, Problems of energy and resource saving in electrical systems. Science, Education and Practice, Scientific publication, Kremenchuk Mykhailo Ostrohradskyi National University, 1, 29–31 (2016) [Google Scholar]
- A. Bosak, V. Chermalykh, Positional control of the mine hoisting installation with a fuzzy correction of the load’s location, Bulletin of the “Kharkiv Polytechnic Institute” of the National. 36, 485–487 (2013) [Google Scholar]
- O. Plakhtii, V. Nerubatskyi, V. Kavun, D. Hordiienko, Active single-phase four-quadrant rectifier with improved hysteresis modulation algorithm, Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 5, 93–98 (2019) [Google Scholar]
- Zhang Hongwei, Wang Xinhuan, YU Fashan, Research on the Operation Control for Rope-less hoist system Driven by Permanent Magnet Linear Synchronous Motor, Proceedings of the 31st Chinese Control Conference, July 25-27, 2012, Hefei, China, 5619–5624 (2012) [Google Scholar]
- P. Borisov, A. Sednev, Mathematical simulation of the DC electric drive with the active rectifier, Nauchno-tehnicheskiy vestnik Sankt- Peterburgskogo gosudarstvennogo universiteta informatsionnyh tehnologiy, mehaniki i optiki, 3, 35–41 (2009) [Google Scholar]
- Anjana Manuel, Jebin Francis. Simulation of Direct Torque Controlled Induction Motor Drive by using Space Vector Pulse Width Modulation for Torque Ripple Reduction. International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering, 2, 4471–4478 (2013) [Google Scholar]
- J. Lettl, J. Bauer. Compatibility of Different Types of Frequency Converters with Supply Network. Faculty of Electrical Engineering, Czech Technical University in Prague, Czech Republic, PIERS Online, 6, 537–541 (2010) [Google Scholar]
- J. Bauer. Single-Phase Pulse Width Modulated Rectifier. Czech Technical University in Prague Faculty of Electrical Engineering Technická, Acta Polytechnica, 48, 84–87 (2008) [Google Scholar]
- Madhuri Saxena, Sanjeev Gupta, Simulation of Multipulse Converter for HarmonicReduction using Controlled Rectifier, International Journal of Science and Research (IJSR), India, 2, 260–264 (2013) [Google Scholar]
- D. Casadei, F. Profumo, G. Serra, A. Tani, FOC and DTC: Two Viable Schemes for Induction Motors Torque Control, IEEE Transactions on power electronics, 17, 779–787 (2002) [Google Scholar]
- D.Ghanbari, N.R.Abjadi, A.Ghanbari, Direct Torque and Flux Control of Five-PhaseInduction Motor Using Fuzzy Logic, International Journal of Innovative Research in Electrical, Electronics, Instrumentations and Control Engineering, 2, 2196–2202 (2014) [Google Scholar]
- T. Swapna, M. Rakesh, Analysis of 2-Level and 3-Level Inverter Fed Direct Torque Control of Induction Motor Drive, Research Inventy: International Journal of Engineering And Science, 5, 20–26 (2015) [Google Scholar]
- Y. Zeinaly, Computationally Efficient Model Predictive Direct Torque Control, Automatic Cotnrol Group, Department of Signals and Systems, Chalmers University of Technology, Göteborg, Sweden, (2010), p. 72 [Google Scholar]
- I. Fedotov, V. Tikhonov, E. Veselkov, N. Seletskaya, The comparative analysis of energetic characteristics of variable-frequency characteristics of variable-frequency electric drives with direct torque control, Environment. Technology. Resources, Rezekne, Latvia Proceedings of the 10th International Scientific and Practical Conference, 1, 33–38 (2015) [Google Scholar]
- Ravindra Pawar, Ashok Jhala, Direct Torque Control of Induction Motor Drives, International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering, 5, 798–804 (2016) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.