Open Access
Issue |
E3S Web Conf.
Volume 285, 2021
International Conference on Advances in Agrobusiness and Biotechnology Research (ABR 2021)
|
|
---|---|---|
Article Number | 07037 | |
Number of page(s) | 13 | |
Section | Agricultural Machinery | |
DOI | https://doi.org/10.1051/e3sconf/202128507037 | |
Published online | 06 July 2021 |
- S. Lv, H. Kim, B. Zheng, H. Jin, A review of data mining with big data towards its applications in the electronics industry, Appl. Sci. 8(4) (2018) 1-34. [Google Scholar]
- G. Smith, Global Consumer Electronics Manufacturing Industry—Market Research Report, Los Angeles, IBISWorld, 2019 [Google Scholar]
- M. Liukkonen, E. Havia, Y. Hiltunen, Computational intelligence in mass soldering of electronics—A survey, Expert Syst. Appl. 39 (10) (2012) 9928–9937. [Google Scholar]
- D. M. Tsai, Y. C. Hsieh, Machine vision-based positioning and inspection using expectation–maximization technique, IEEE Trans. Instrum. Meas. 66 (11) (2017) 2858–2868. [Google Scholar]
- S. Gebus, K. Leiviskä, Knowledge acquisition for decision support systems on an electronic assembly line, Expert Syst. Appl. 36 (1) (2009) 93–101. [Google Scholar]
- A. Ebayyeh, A. Mousavi, A Review and Analysis of Automatic Optical Inspection and Quality Monitoring Methods in Electronics Industry, IEEE Acc. 8 (2020) 183192-183271. [Google Scholar]
- I. Kovtun, J. Boiko, S. Petrashchuk, Nondestructive strength diagnostics of solder joints on printed circuit boards, Proc. 2017 Inter. Conf. Inform. Telecomm. Tech. Radio Electr. (UkrMiCo), (2017) 1-4. [Google Scholar]
- C. D. Hechtman, In-circuit test fixture [PCB testing], IEEE Trans. Industr. Electr. 36 (2) (1989) 192-196. [Google Scholar]
- C. Benedek, O. Krammer, M. Janoczki, L. Jakab, Solder Paste Scooping Detection by Multilevel Visual Inspection of Printed Circuit Boards, IEEE Trans. Industr. Electr. 60 (6) (2013) 2318-2331. [Google Scholar]
- Y. C. Chan, D. J. Xie, J. K. L. Lai, I. K. Hui, Application of direct strain measurement to fatigue studies in surface solder joints, IEEE Trans. Comp. Packag. Manufactur. Tech. B. 18 (4) (1995) 715-719. [Google Scholar]
- R. Jones, S. Galea, Health Monitoring of Composite Repairs and Joints using Optial Fibers, Comp. Struc. 50 (2002) 397-403. [Google Scholar]
- M. Simone, T. Giorgio, G. Paolo, Structural Health Monitoring for Future Space Vehicles”, J. Intell. Mat. Sys. Struc. 17 (2006) 577-585. [Google Scholar]
- V. S. Ramalingam, Transit Time Dependent Condition Monitoring of PCBs During Testing for Diagnostics in Electronics Industry, IEEE Trans. Industr. Electr. 65 (1) (2018) 553-560. [Google Scholar]
- D. S. Erdahl, I. C. Ume, Online-offline laser ultrasonic quality inspection tool for multilayer ceramic capacitors-part I, IEEE Trans. Advan. Packag. 27 (4) (2004) 647-653. [Google Scholar]
- Y. Liang, S. Zhang, A case study of the delamination analysis of plastic encapsulated microcircuits based on scanning acoustic microscope inspection, IEEE Prognos. Sys. Health Manag. Conf. (PHM-2014 Hunan) (2014) 190-193. [Google Scholar]
- M. Reiten, R. G. Wright, Laser doppler vibrometry use in detecting faulty printed circuit boards, Proc. IEEE 2008 AUTOTESTCON (2008) 33-36. [Google Scholar]
- S. Tismer, S. Brand, S. Klengel, M. Petzold, P. Czurratis, Acoustic imaging of bump defects in flip-chip devices using split spectrum analysis, Proc. IEEE 2013 Int. Ultrasonics Symposium (IUS) (2013) 950-953. [Google Scholar]
- R. G. Wright, L. V. Kirkland, Circuit board testing through multispectral signal analysis, Proc. IEEE 2005 AUTOTESTCON (2005) 752-758. [Google Scholar]
- R. G. Wright, Multiresolution sensor fusion approach to PCB fault detection and isolation, Proc. IEEE 2008 AUTOTESTCON (2008) 41-46. [Google Scholar]
- S. Levikari, T. J. Kärkkäinen, P. Silventoinen, C. Andersson, J. Tamminen, Acoustic detection of cracks and delamination in multilayer ceramic capacitors, Proc. IEEE 2017 11th Int. Symposium Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) (2017) 622-627. [Google Scholar]
- R. Shannon, G. Zucaro, J. Tallent, V. Collins, J. Carswell, A system for detecting failed electronics using acoustics, IEEE Instrument. Meas. Mag. 22 (4) (2019) 32-37. [Google Scholar]
- T. Dogaru, S. Smith, Giant magnetoresistance-based eddy-current sensor, IEEE Trans. Magn. 37 (2001) 3831–3838. [Google Scholar]
- M. Cacciola, G. Megali, D. Pellicanó, F. C. Morabito, A GMR–ECT based embedded solution for applications on PCB inspections, Sens. Actuat, A 167 (2011) 25–33. [Google Scholar]
- S. Dmitriev, V. Malikov, A. Ishkov, Superminiature eddy-current transducers for studying steel to dielectric junctions, Mater. Sci. For. 927 (2018) 161-167. [Google Scholar]
- S. Dmitriev, V. Malikov, A. Ishkov, Measurement System for Studying Flaws in Alloy Slabs by Means of Subminiature Eddy-Current Transducers, Measur. Tech. 60(4) (2017) 372-375. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.