Open Access
Issue
E3S Web Conf.
Volume 300, 2021
2021 2nd International Conference on Energy, Power and Environmental System Engineering (ICEPESE2021)
Article Number 01001
Number of page(s) 15
Section Energy and Power Engineering
DOI https://doi.org/10.1051/e3sconf/202130001001
Published online 06 August 2021
  1. Shoudao Huang, Ting Liu, Honglin Ouyang, Jian Gao. Permanent Magnet Motor Cogging Torque Reduction Method Based on Slot Offset[J]. Transactions of the Chinese Society of Electrical Engineering, 2013, 28(03):99-106. [Google Scholar]
  2. Jiaqi Liu, Jingang Bai, Ping Zheng, Guopeng Liu, Jiaxuan Huang. Study on Cogging Torque Based on the Principle of Magnetic Field Modulation[J]. Transactions of the Chinese Society of Electrical Engineering, 2020, 35(05):931-941. [Google Scholar]
  3. Xu Tang, Xiuhe Wang, Shumin Sun, Junwei Zhao. Analytical Analysis and Weakening Measures of Cogging Torque of Asynchronous Starting Permanent Magnet Synchronous Motor[J]. Proceedings of the Chinese Society for Electrical Engineering, 2016, 36(05):1395-1403. [Google Scholar]
  4. Xu Tang, Xiuhe Wang, Mengmeng Tian, Xiaoxue Meng. Research on Cogging Torque Weakening Measures of Asynchronous Start Permanent Magnet Synchronous Motor Based on Changing Stator Cogging Parameters[J]. Transactions of the Chinese Society of Electrical Engineering, 2016, 31(23):18. [Google Scholar]
  5. Yubo Yang, Xiuhe Wang, Changqing Zhu. The Influence of Armature Slot Width on Cogging Torque of Built-in Permanent Magnet Synchronous Motor[J]. Journal of Electrical Machines and Control, 2011, 15(07):21-25. [Google Scholar]
  6. Yubo Yang, Xiuhe Wang, Tingting Ding, Xin Zhang, Zhang Ran, Changqing Zhu. Permanent Magnet Motor Cogging Torque Reduction Method Based on Pole Arc Coefficient Combination Optimization[J]. Proceedings of the Chinese Society of Electrical Engineering, 2007(06):7-11. [Google Scholar]
  7. Zeyu Zhang, Zhiyong Jiao, Hongbing Xia, Peng Zhao, Shijian Su. Study on the Effect of Auxiliary Grooves on the Rotor Surface of Permanent Magnet Synchronous Motors on Cogging Torque[J/OL]. Mechanical and Electrical Engineering, 2019(12):1342-1346 [2020-07-26]. [Google Scholar]
  8. Yongxing Jin, Aiyuan Wang, Jian Sun, Tao Wang. Optimal Design of Noise and Cogging Torque of Permanent Magnet Synchronous Motor[J]. Journal of Shanghai Dianji University, 2019, 22(02):68-72. [Google Scholar]
  9. Shi Jiao, Zhiyong Lan, Lin Wang. Analysis of Electromagnetic Field and Cogging Torque of Surface-mounted Permanent Magnet Synchronous Motor Based on Analytical Method[J]. Electrical Technology, 2019, 20(04):7-11. [Google Scholar]
  10. Yantao Huang, Xinhua Guo, Leijun Xiang. Optimal Design of Cogging Torque of Built-in Permanent Magnet Motor[J]. Journal of Huaqiao University(Natural Science Edition), 2016, 37(05):536-540. [Google Scholar]
  11. Yanan Tang, Huicheng Jing, Xin Zhao, Zhichao Wang. Permanent Magnet Synchronous Motor Cogging Torque Optimization Design Simulation[J]. Micro Special Motor, 2019, 47(01):28-32. [Google Scholar]
  12. Qingling He, Qunjing Wang. Research on Cogging Torque Weakening Method of Permanent Magnet Synchronous Generator[J]. Journal of Electronic Measurement and Instrument, 2013, 27(05):461-466. [Google Scholar]
  13. Feifei Liang. Research on Cogging Torque of Surface-mounted Permanent Magnet Synchronous Motor Based on Finite Element Analysis[D]. Zhejiang University of Technology, 2016. [Google Scholar]
  14. Ke Liu. Study on the Influence of Permanent Magnet Motor Cogging Torque on the Initial Position of Resolver[J]. Micromotor, 2019, 52(02):69-72. [Google Scholar]
  15. Xiuhe Wang, Yubo Yang, Tingting Ding, Changqing Zhu, Wang Daohan. Research on Cogging Torque Weakening Method of Solid Rotor Permanent Magnet Synchronous Motor Based on Pole Arc Coefficient Selection[J]. Proceedings of the Chinese Society of Electrical Engineering, 2005(15):146-149. [Google Scholar]
  16. Jiajie Zou, Shiwei Zhao, Xiangyu Yang. Optimization of Cogging Torque of Outer Rotor PMSM Based on Genetic Algorithm[J]. Micro Special Motor, 2020, 48(04):1-6. [Google Scholar]
  17. Xuejie Liu, Jin Zhou, Chaowu Jin, Dapeng Wang. Optimization of Cogging Torque of Low-speed Permanent Magnet Motor Based on RBF Approximate Model[J]. Micro Special Motor, 2020, 48(01):25-29. [Google Scholar]
  18. Yu Lei, Fugui Liu, Pengfei Wang. Permanent Magnet Synchronous Motor Cogging Torque Optimization Based on Improved TO Algorithm[J]. Experimental Technology and Management, 2019, 36(11):146-149. [Google Scholar]
  19. Jiabin Wen, Lan Yu. The Application of Taguchi Method in the Structural Optimization of Permanent Magnet Synchronous Motor[J]. Journal of Harbin University of Science and Technology, 2019, 24(05):64-69. [Google Scholar]
  20. Jianjun Li, Kaisheng Huang, Ning Wu, Qu Huang. Multi-objective Optimization of Surface Permanent Magnet Synchronous Motor Based on Taguchi Method[J]. Micro Special Motor, 2018, 46(07):10-13. [Google Scholar]
  21. Wenyao Cao, Bi Hu, Tuxiong Hu, Wei Wang. PMSM Cogging Torque Optimization Based on SVM-CSO Algorithm.[J]. Explosion-proof Electric Machines, 2018, 53(04):14. [Google Scholar]
  22. Haoyang Li. Research on Cogging Torque and Torque Ripple Mechanism and Optimization of Embedded Permanent Magnet Synchronous Motor[D]. Nanjing Normal University, 2018. [Google Scholar]
  23. Zhifeng Zhang, Chunhai Zhu. Duty Cycle Direct Torque Control of Dual Three-phase Permanent Magnet Synchronous Motor[J]. Journal of Shenyang University of Technology, 2020, 42(04):361-367. [Google Scholar]
  24. Junqiang Lian, Hongkun Sun. Optimization of Cogging Torque of Marine Permanent Magnet Motor Based on PSO Algorithm[J]. China Ship Research, 2014, 9(03):123-128 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.