Open Access
Issue
E3S Web Conf.
Volume 309, 2021
3rd International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED-ICMPC 2021)
Article Number 01002
Number of page(s) 6
DOI https://doi.org/10.1051/e3sconf/202130901002
Published online 07 October 2021
  1. Dong, B., Jia, H., Li, Z., & Dong, K., Systems Engineering Procedia 3, 372 (2012). [Google Scholar]
  2. Bryan, D., 2006. The Weibull analysis handbook. 2nd ed. Milwaukee, WI: ASQ Quality Press. Byrne, M.D. and Hossain, M.M., International Journal of Production Economics, 93, 225 (2005). [Google Scholar]
  3. Entrup, M.L., Gunther, H.O., van Beek, P., Grunow, M., & Seiler, T., International Journal of Production Research, Vol. 43, 5071 (2005). [Google Scholar]
  4. Maravelias, C.T., and Sung, Proceeding Foundation of Computer Aided Process Operations (FCAPO). 77, 800 (2008). [Google Scholar]
  5. Afolalu SA, Ikumapayi OM, Abdulkareem A, Soetan SB, Emetere ME, Ongbali SO, Material today: Proceedings., Vol 44, 2895 (2021) [Google Scholar]
  6. Maybodi, M., and Foote, B. Annual of Operations Research, 59, 259 (1995). [Google Scholar]
  7. Mula, J., Poler, R. and Garcia, G.P, Fuzzy Sets and System, vol. 157, 74 (2006). [Google Scholar]
  8. Rekaitis, G.V.. Latin American Applied Research, 30, 285 (2000). [Google Scholar]
  9. Ongbali Samson O, Afolalu Sunday A., Igboanugo Anthony C. International Journal of Mechanical Engineering and Technology, 9, 113 (2018). [Google Scholar]
  10. Kinkel, S., Kirner, E., Armbruster, H., & Jäger, A. International Journal of Technology Management, 55, 263 (2011). [Google Scholar]
  11. Ikumapayi, O. M., Akinlabi, E. T., Madushele, N., Fatoba, S. O. Advances in Manufacturing Engineering, Lecture Notes in Mechanical Engineering, page 149 (2020). [Google Scholar]
  12. Papageorgiou, L.G., and Pantelides, C.C. Industrial Chemical Engineering Research, 35, 488 (1996). [Google Scholar]
  13. Salawu, E.Y., Okokpujie, I.P., Afolalu, S.A., Ajayi, O.O. and Azeta, J., Journal of Mechanical and Production Engineering Research and Development, 8, 915 (2018). [Google Scholar]
  14. Bitran, G. R., Haas, E. A., & Hax, A. C. Operations Research, 30, 232 (1982). [Google Scholar]
  15. Feng, P., Zhang, J., Wu, Z., & Yu, D. International Journal of Production Research, 49, 4223 (2011). [Google Scholar]
  16. Akkerman, R., & van Donk, D. P. Cognition, Technology and Work, 11, 215 (2009). [Google Scholar]
  17. Jiang, R.Y., Weibull Beijing: Science Press (1998). [Google Scholar]
  18. Kall, P. and Mayer, J., Springer’s International Series. New York: Springer. 44, 455 (2005). [Google Scholar]
  19. Elewa, R. E., Afolalu, S. A., & Fayomi, O. S. I. In Journal of Physics: Conference Series Vol. 1378, 022069 (2019). [Google Scholar]
  20. Lee, J., Journal of Research and Development, 51, 489 (2007). [Google Scholar]
  21. Kopanos, G.M., Lainez, J.M., and Puigjaner, L., Industrial and Engineering Chemistry Research, 48, 6346 (2009). [Google Scholar]
  22. Lodwick, W.A. and Bachman, K.A., Fuzzy Optimization and Decision Making, 4, 257 (2005). [Google Scholar]
  23. Ongbali Samson, O., Afolalu Sunday, A., & Salawu Enesi, Y, Technology, 10, 606 (2019). [Google Scholar]
  24. Sunday A. Afolalu, Oluwasegun J. Adelakun, Samson O. Ongbali, Abiodun A. Abioye, Oluseyi O. Ajayi, Oloyede Olamilekan R. Proceedings of the World Congress on Engineering-WCE (2019). [Google Scholar]
  25. Mula, J., Poler, R., Garcia-Sabater, J.P. and Lorio, F.C. Intl. Journal of Production Economics, 103, 271 (2006). [Google Scholar]
  26. Singhvi, A., et al., Computers and Chemical Engineering, 28, 993 (2004). [Google Scholar]
  27. Liu, X.B., Bo, H.G., et al., In: Proceedings of the 3rd international conference, FSKD. Berlin: Springer-Verlag, 4223, 929 (2006). [Google Scholar]
  28. Loos, P. and Allweyer, T., Computers in Industry, 36, 199 (1998). [Google Scholar]
  29. Sun, C.Y., Hierarchical optimal production control policy for production systems in Process industry. Institute of Industrial Process Control, Zhejiang University (2002). [Google Scholar]
  30. Sun HL, Xue YF. The International Journal of Advanced Manufacturing Technology. 43, 779 (2009). [Google Scholar]
  31. Ikumapayi, O. M., Akinlabi, E. T., Onu, P. Advances in Manufacturing Engineering, Lecture Notes in Mechanical Engineering, page 161 (2020) [Google Scholar]
  32. Masoumeh, K.Z., Mustapha, N., and Daoud, A.K., International Journal of Production Research, 48, 4701 (2009). [Google Scholar]
  33. Sukoyo, Shinobu, M., and Masaki, M., Journal of the Japan Petroleum Institute, 47, 318 (2004). [Google Scholar]
  34. Austin, J.E., EDI Series in Economic Development (2017) [Google Scholar]
  35. Benjaafar, D.C S. &ElHafsi, M., Management Science, Vol. 52, 1896 (2006). [Google Scholar]
  36. Ongbali Samson O, Afolalu Sunday A., Udo Mfon. International Journal of Mechanical Engineering and Technology, 9, 2396 (2018). [Google Scholar]
  37. Rajaram, K., & Karmarkar, U.S., Manufacturing & Service Operations Management, Vol. 6, 253 (2004). [Google Scholar]
  38. Soman, C. A., van Donk, D.P., & Gaalman, G.J.C., International Journal of Production Economics 108, 191 (2007). [Google Scholar]
  39. Tadei, R., Trubian, M., Avendano, J.L., Croce, F.D., & Menga, G., European Journal of Operational Research, 87, 564 (1995). [Google Scholar]
  40. Samson, O. O., Afolalu, S. A., Ojo, S. F., & Oladipupo, S. In Journal of Physics: Conference Series, Vol. 1378, 032072 (2019). [Google Scholar]
  41. Ikumapayi, O.M.,Oyinbo, S.T., Akinlabi, E.T., Madushele, N, Materials Today: Proceedings 26, 1532 (2020) [Google Scholar]
  42. Ikumapayi, O.M., Akinlabi, E.T., Mwema, F.M., Ogbonna, O.S, Materials Today: Proceedings 26, 3275 (2020) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.