Open Access
Issue |
E3S Web Conf.
Volume 309, 2021
3rd International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED-ICMPC 2021)
|
|
---|---|---|
Article Number | 01018 | |
Number of page(s) | 6 | |
DOI | https://doi.org/10.1051/e3sconf/202130901018 | |
Published online | 07 October 2021 |
- Welch, G., Bishop, G. In Pract. 7, 1 (2006). [Google Scholar]
- De Santis, R., Gloria, A., Ambrosio, L. Composite materials for hip joint prostheses. Biomedical Composites (Elsevier Ltd., 2017). [Google Scholar]
- Maksimkin, A. V., Kaloshkin, S. D., Tcherdyntsev, V. V., Senatov, F. S., Danilov, V. D., Inorg. Mater. Appl. Res. 3, 288 (2012). [Google Scholar]
- Maksimkin, A. V., Kaloshkin, S. D., Tcherdyntsev, V. V., Chukov, D. I., Stepashkin, A., Biomed. Eng. (NY). 47, 73 (2013). [Google Scholar]
- Sonntag, R., Reinders, J., Kretzer, J. P., Acta Biomater. 8, 2434 (2012). [CrossRef] [PubMed] [Google Scholar]
- Zeman, J.,J. Mech. Behav. Biomed. Mater. 87, 30 (2018). [CrossRef] [PubMed] [Google Scholar]
- Bhattacharyya, A., Chen, S., Zhu, M.,,Express Polym. Lett. 8, 74–84 (2014). [Google Scholar]
- Langlois, J., Hamadouche, M., Sicot-J, 6, (2020). [Google Scholar]
- Sobieraj, M. C., Rimnac, C. M., J. Mech. Behav. Biomed. Mater. 2, 433 (2009). [CrossRef] [PubMed] [Google Scholar]
- Schwartsmann, C. R., Boschin, L. C., Gonçalves, R. Z., Yépez, A. K., de Freitas Spinelli, L., Rev. Bras. Ortop. 47, 154 (2012). [CrossRef] [PubMed] [Google Scholar]
- Kurtz, S. M. UHMWPE Biomaterials Handbook: Ultra High Molecular Weight Polyethylene in Total Joint Replacement and Medical Devices: Third Edition (Elsevier Inc, 2015). [Google Scholar]
- Birman, M. V., Noble, P. C., Conditt, M. A., Li, S., Mathis, K. B., J. Arthroplasty, 20, 87 (2005). [Google Scholar]
- Puértolas, J. A., Kurtz, S. M., J. Mech. Behav. Biomed. Mater. 39, 129 (2014). [CrossRef] [PubMed] [Google Scholar]
- Glyn-Jones, S., J. Arthroplasty 23, 337 (2008). [Google Scholar]
- Ghalme, S. G., Mankar, A., Bhalerao, Y., Int. J. Mater. Sci. Eng. 4, 113 (2016). [Google Scholar]
- Scholz, R., J. Mech. Behav. Biomed. Mater. 85, 94 (2018). [CrossRef] [PubMed] [Google Scholar]
- Tsukamoto, R., Acta Orthop. 77, 505 (2006). [CrossRef] [PubMed] [Google Scholar]
- Bashyal, R. K., Eberhardt, J., Malchau, H., Semin. Arthroplasty 22, 79 (2011). [Google Scholar]
- Pietrzak, W. S., J. Investig. Surg. 0, 1 (2019). [Google Scholar]
- Roeder, R. K., Converse, G. L., Kane, R. J., Yue, W., Jom, 60, 38 (2008). [Google Scholar]
- Yamamoto, K., Tateiwa, T., Takahashi, Y., J. Orthop. Sci. 22, 384 (2017). [CrossRef] [PubMed] [Google Scholar]
- Affatato, S., Freccero, N., Taddei, P., J. Mech. Behav. Biomed. Mater. 53, 40 (2016). [CrossRef] [PubMed] [Google Scholar]
- Chen, G., Ni, Z., Qian, S., Zhao, Y., Ind. Lubr. Tribol. 68, 548 (2016). [Google Scholar]
- Sadat-Shojai, M., Khorasani, M. T., Dinpanah-Khoshdargi, E., Jamshidi, A., Acta Biomater. 9, 7591 (2013). [CrossRef] [PubMed] [Google Scholar]
- Fang, L., Leng, Y., Gao, P., Biomaterials 26, 3471 (2005). [CrossRef] [PubMed] [Google Scholar]
- Suñer, S., Emami, N., Tribol. - Mater. Surfaces Interfaces 8, 1 (2014). [Google Scholar]
- Çolak, A., Göktaş, M., Mindivan, F., SN Appl. Sci. 2, (2020). [Google Scholar]
- Kang, M. S., Biomater. Res. 25, 1–9 (2021). [CrossRef] [PubMed] [Google Scholar]
- Graziano, A., Jaffer, S., Sain, M., J. Polym. Eng. 39, 85 (2019). [Google Scholar]
- Dabees, S., Kamel, B. M., Tirth, V., Elshalakny, A. B., Bioengineered 11, 679 (2020). [CrossRef] [PubMed] [Google Scholar]
- Good, V., Widding, K., Hunter, G., Heuer, D., Mater. Des. 26, 618 (2005). [Google Scholar]
- Salari, M., Mohseni Taromsari, S., Bagheri, R., Faghihi Sani, M. A., J. Mater. Sci. 54, 4259 (2019). [Google Scholar]
- Plumlee, K., Schwartz, C. J., Wear 267, 710 (2009). [Google Scholar]
- Li, Y., He, H., Ma, Y., Geng, Y., Tan, J., Adv. Ind. Eng. Polym. Res. 2, 51 (2019). [Google Scholar]
- Suresha, B., Harshavardhan, B., Rao, A. M., Koushik, U. R., Hemanth, R., Mater. Today Proc. 27, 2169 (2019). [Google Scholar]
- Khasraghi, S. S., Rezaei, M., J. Thermoplast. Compos. Mater. 28, 305 (2015). [Google Scholar]
- Bhusari, S. A., Sharma, V., Bose, S., Basu, B., J. R. Soc. Interface 16, (2019). [Google Scholar]
- Chang, B. P., Akil, H. M., Nasir, R. M.,. Procedia Eng. 68, 88 (2013). [Google Scholar]
- Fang, L., Leng, Y., Gao, P., Biomaterials 27, 3701 (2006). [CrossRef] [PubMed] [Google Scholar]
- Liu, Y., Sinha, S. K., Wear 300, 44 (2013). [Google Scholar]
- Zulkifli, F., Int. J. Impact Eng. 129, 119 (2019). [Google Scholar]
- Azam, M. U., Samad, M. A., Prog. Org. Coatings 118, 97 (2018). [Google Scholar]
- Baena, J. C., Peng, Z., Polym. Test. 71, 125 (2018). [Google Scholar]
- Melk, L., Emami, N., Compos. Part B Eng. 146, 20 (2018). [Google Scholar]
- Alam, F., Mater. Sci. Eng. B Solid-State Mater. Adv. Technol. 241, 82 (2019). [Google Scholar]
- Gürgen, S., Çelik, O. N., Kuşhan, M. C., Compos. Part B Eng. 173, (2019). [Google Scholar]
- Chang, B. P., Md. Akil, H., Bt. Md. Nasir, R., Wear 297, 1120 (2013). [Google Scholar]
- Shi, G., Cao, Z., Yan, X., Wang, Q., Mater. Chem. Phys. 236, 121778 (2019). [Google Scholar]
- Golchin, A., Villain, A., Emami, N., Tribol. Int. 110, 195 (2017). [Google Scholar]
- Dalai, N., Sreekanth, P. S. R., J. Mech. Behav. Biomed. Mater. 116, 104327 (2021). [CrossRef] [PubMed] [Google Scholar]
- Danilova, S. N.,Polymers (Basel). 13, 1 (2021). [Google Scholar]
- Toyen, D., Wimolmala, E., Sombatsompop, N., Markpin, T., Saenboonruang, K., Radiat. Phys. Chem. 164, 108366 (2019). [Google Scholar]
- Zhao, Z. N., Compos. Part B Eng. 221, 109023 (2021). [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.