Open Access
E3S Web Conf.
Volume 309, 2021
3rd International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED-ICMPC 2021)
Article Number 01066
Number of page(s) 5
Published online 07 October 2021
  1. F. Bottoli, M.S. Jellesen, T.L. Christiansen, G. Winther, M.A.J. Somers, App.Sur.Sci.J.E 431, 24 (2018). [Google Scholar]
  2. N. Chen, G. Ma, W. Zhu, A. Godfrey, Z. Shen, G. Wu, X. Huang, Mat. Sci. Eng. A.J. E 759, 82 (2019). [Google Scholar]
  3. M.G. Shahri, M. Salehi, S.R. Hosseini, M. Naderi, Surf. Coat Tech.J. E 310, 44 (2017). [Google Scholar]
  4. Y.M. Wang, T. Voisin, J.T. McKeown, J. Ye, N.P. Calta, Z. Li, Z. Zeng, Y. Zhang, W. Chen, T.T. Roehling, R.T. Ott, M.K. Santala, P.J. Depond, M.J. Matthews, A. V. Hamza, T. Zhu, Nat. Mat.J. E 17, 63 (2018). [Google Scholar]
  5. A. Popelka, I. Novák, M.A.S.A. Al-Maadeed, M. Ouederni, I. Krupa, Surf. Coat. Tech.J. E 335, 118 (2018) [Google Scholar]
  6. Q. Chao, V. Cruz, S. Thomas, N. Birbilis, P. Collins, A. Taylor, P.D. Hodgson, D. Fabijanic, Scr. Mat.J. E 141, 94 (2017). [Google Scholar]
  7. M. Mamatha Gandhi, Animesh Bain, P Rohith, R. Srilatha, Ram Subbiah, Structure and Topography Modifications of Treated AISI 316LN Stainless Steel Surfaces after Friction in Dry Sliding Contact by Case Hardening Process (EDP Sciences, Hyderabad, 2020) [Google Scholar]
  8. K. Ramya Sree, G. Keerthi Reddy, K. Aishwarya, E. Nirmala Devi, Ram. Subbiah, New Insights of Wear Behavior Analysis on Low Temperature Treated AISI 253MA Stainless steel Material by Gas Nitriding Process (EDP Sciences, Hyderabad, 2020) [Google Scholar]
  9. A Rohit Sai Krishna, B Vamshi Krishna, D Harshith, T Sashank, Ram Subbiah, Investigation of Mechanical Properties of AISI 316 Stainless Steel by Carbonitriding Process (EDP Sciences, Hyderabad, 2020) [Google Scholar]
  10. Shivani Koppula, Aakula Rajkumar, Siram Hari Krishna, Reddi Sai Prudhvi, S. Aparna, Ram Subbiah, Improving the Mechanical Properties of AISI 2205 Duplex Stainless Steel by Cryogenic Treatment Process (EDP Sciences, Hyderabad, 2020) [Google Scholar]
  11. Lakshmi Deepak Tadepalli, Ananda Mithra Gosala, Lokesh Kondamuru, Sai Chandra Bairi, A. Anitha Lakshmi, Ram Subbiah, Assessment of Properties on AISI430 Ferritic Stainless Steel by Nitriding process (EDP Sciences, Hyderabad, 2020) [Google Scholar]
  12. Gandla Lakshmi Prasanna, G. Keerthi Reddy, Ram Subbiah, Evaluation of properties of AISI 431Grade Stainless Steel by Vacuum Annealing Process (EDP Sciences, Hyderabad, 2020) [Google Scholar]
  13. Gandla Lakshmi Prasanna, J Saranya, Ram Subbiah, Assessment of AISI 431Grade Stainless Steel properties by Vacuum Tempering Process (EDP Sciences, Hyderabad, 2020) [Google Scholar]
  14. Manne Vamshi, J. Saranya, Ram Subbiah, Improvement of Characteristics of AISI 310 Grade Stainless Steel Material By Carburizing (EDP Sciences, Hyderabad, 2020) [Google Scholar]
  15. Manne Vamshi, Animesh Bain, M. Sreekanth, Ram Subbiah, Wear Characteristics of AISI 310 Grade Stainless Steel Material by Carbonitriding Process (EDP Sciences, Hyderabad, 2020) [Google Scholar]
  16. Ram. Subbiah, Md. Rahel, A. Sravika R. Ambika, A. Srujana, E. Navya, Investigation on Microstructure and Mechanical Properties of P91 Alloy Steel Treated With Normalizing Process -A Review (Materials Today: Proceedings, Hyderabad, 2019) [Google Scholar]
  17. A. Rohit Sai Krishna, B. Vamshi Krishna, T. Sashank, D. Harshith, Ram Subbiah, Influence and assessment of mechanical properties on treated P91 steel with normalizing processes (Materials Today: Proceedings, Hyderabad, 2020) [Google Scholar]
  18. K. Manjith Srinivas, S. Bharath, P. N. V. Krishna Chaitanya, M. Pramod, Ram Subbiah, Improving tribological properties of P91 steels through carburizing process (Materials Today: Proceedings, Hyderabad, 2020) [Google Scholar]
  19. B. Chaitanya kumar, P. Sri Charan, Kanishkar Jayakumar, D. Alankrutha, G. Sindhu, Ram Subbiah, Assessment of wear properties on low temperature molten salt bath nitriding on austenitic stainless steel (Materials Today: Proceedings, Hyderabad, 2020) [Google Scholar]
  20. T. Lakshmi Deepak, G. Ananda Mithra, K. Lokesh, B. Sai Chandra, Ram Subbiah, Stability of expanded austenite by gas nitriding process on austenitic stainless steel material under low temperature conditions (Materials Today: Proceedings, Hyderabad, 2020) [Google Scholar]
  21. Nirmala Devi, G. Chitra. S, Selvasekarapandian. S. Premalatha, M. Monisha, S. Saranya. J, Ionics. J.E 23, 2337 (2017) [Google Scholar]
  22. Patel. S, Rana. R.S, Singh. S.K, Study on mechanical properties of environment friendly Aluminium E-waste Composite with Fly ash and E-glass fiber (Materials Today: Proceedings, Hyderabad, 2017) [Google Scholar]
  23. Prasad. K.S, Gupta. A.K, Singh. Y, Singh. S.K, Materi Eng and Perform.J.E 25, 5411 (2016) [Google Scholar]
  24. Ganesh. R, Subbiah. R, Chandrasekaran. K, Dry Sliding Wear Behavior of Powder Metallurgy Aluminium Matrix Composite (Materials Today: Proceedings, Hyderabad, 2015) [Google Scholar]
  25. Dhanalaxmi. B, Apparao Naidu. G, Anuradha, K, Adaptive PSO based association rule mining technique for software defect classification using ANN (Procedia Computer Science, Hyderabad, 2015) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.