Open Access
Issue
E3S Web Conf.
Volume 309, 2021
3rd International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED-ICMPC 2021)
Article Number 01179
Number of page(s) 9
DOI https://doi.org/10.1051/e3sconf/202130901179
Published online 07 October 2021
  1. Xingyu, Gu, Dai Yiqing, and Jiang Jiwang. Eng. Struct. 206 (2020): 110117. [Google Scholar]
  2. Yang, Yang, et al. Mater. Struct. 53.4 (2020): 1–15. [Google Scholar]
  3. Zhou, Yingwu, et al. Materials 13.1 (2020): 234. [Google Scholar]
  4. Attia, Karim, Ahmed El Refai, and Wael Alnahhal. Journal of composites for construction 24.2 (2020): 04020007. [Google Scholar]
  5. Lu, C. H., et al. IOP Conference Series: Materials Science and Engineering. Vol. 770. No. 1. IOP Publishing, 2020. [Google Scholar]
  6. Sun, Zeyang, et al. Eng. Struct. 197 (2019): 109443. [Google Scholar]
  7. Zhao, Yajun, et al. Advances in Structural Engineering 23.6 (2020): 1154–1167. [Google Scholar]
  8. Ren, Yanru. IOP Conference Series: Materials Science and Engineering. Vol. 768. No. 3. IOP Publishing, 2020. [Google Scholar]
  9. Koniki, S. and Prasad, D.R., 2019. Journal of Building Pathology and Rehabilitation, 4(1), pp.1–8. [Google Scholar]
  10. Araba, Almahdi Mohamed, and Ashraf F. Ashour. Composites Part B: Engineering 154 (2018): 321–336. [Google Scholar]
  11. Maranan, G. B., et al Engineering Structures 182 (2019): 141–152. [Google Scholar]
  12. Mustafa, Suzan AA, and Hilal A. Hassan. HBRC journal 14.3 (2018): 300–308. [Google Scholar]
  13. Zhu, Peng, et al. Journal of Composites for Construction 21.5 (2017): 04017036. [Google Scholar]
  14. Qin, Renyuan, Ao Zhou, and Denvid Lau. Composites Part B: Engineering 108 (2017): 200–209. [Google Scholar]
  15. Koniki, S. and Prasad, D.R., 2019. Construction and Building Materials, 207, pp.238–248. [Google Scholar]
  16. Sun, Z. Y., et al. Journal of Reinforced Plastics and Composites 31.24 (2012): 1737–1745. [Google Scholar]
  17. Yoo, Doo-Yeol, Nemkumar Banthia, and Young-Soo Yoon. Engineering Structures 111 (2016): 246–262. [Google Scholar]
  18. Kara, Ilker Fatih, Ashraf F. Ashour, and Mehmet Alpaslan Köroğlu. Composite Structures 129 (2015): 111–121. [Google Scholar]
  19. El Refai, Ahmed, Farid Abed, and Abdullah Al-Rahmani. Construction and Building Materials 96 (2015): 518–529. [Google Scholar]
  20. T. Srinivas and M. Abinay Raj, Int. J. of Eng.and Adv. Tech. (IJEAT), ISSN: 2249 – 8958, Volume-8 Issue-6 (2019) [Google Scholar]
  21. T. srinivas and P. Manoj Anand, Int. J. of Innov. Tech. and Explor. Eng.g (IJITEE), ISSN: 2278-3075, Volume-8 Issue-12 (2019) [Google Scholar]
  22. T. Srinivas and G. Sukesh Reddy, Int. J. of Eng. and Adv. Tech. (IJEAT), ISSN: 2249 – 8958, Volume-9 Issue-1 (2019) [Google Scholar]
  23. T. Srinivas and R. N. Koushik, Int. J. of Innov. Tech. and Explor. Eng.g (IJITEE), ISSN: 2278-3075, Volume-8 Issue-12 (2019), PP 112–117. [Google Scholar]
  24. K. Sai Gopi, Dr. T. Srinivas and S. P. Raju V, E3S Web of Conferences ICMED 184, 01084GRIET, 28-29 February, https://doi.org/10.1051/e3sconf/2020184011084 (2020) [Google Scholar]
  25. Jagannadha Kumar, M.V., Jagannadha Rao, K., Dean Kumar, B., Srinivasa Reddy, V., Int. J. of Civil Eng. and Tech., 9(7), pp. 1133–1141 (2018) [Google Scholar]
  26. Ganta, J.K., Seshagiri Rao, M.V., Mousavi, S.S., Srinivasa Reddy, V., Bhojaraju, C., Structures 28, pp. 956–972 (2020) [Google Scholar]
  27. Naidu, K.S.S.T., Rao, M.V.S., Reddy, V.S., Int. J. of Innov. Tech. and Explor. Eng.g (IJITEE), 8(9 Special Issue 2), pp. 641–642 (2019) [Google Scholar]
  28. Chandana Priya, C., Seshagiri Rao, M.V., Srinivasa Reddy, V., Int. J. of Civil Eng. and Tech., 9(11), pp. 2218–2225 (2018) [Google Scholar]
  29. Satya Sai Trimurty Naidu, K., Seshagiri Rao, M.V., Srinivasa Reddy, V., Int. J. of Civil Eng. and Tech., 9(11), pp. 2383–2393 (2018) [Google Scholar]
  30. Supriya, Y., Srinivasa Reddy, V., Seshagiri Rao, M.V., Shrihari, S., Int. J. of Rec. Tech. and Engi., 8(3), pp. 5381–5385 (2019) [Google Scholar]
  31. Kotkunde, N., Krishna, G., Shenoy, S.K., Gupta, A.K., Singh, S.K. International Journal of Material Forming, 10 (2), pp. 255–266 (2017) [Google Scholar]
  32. Govardhan, D., Kumar, A.C.S., Murti, K.G.K., Madhusudhan Reddy, G. Materials and Design, 36, pp. 206–214. (2012) [Google Scholar]
  33. Kumar, P., Singhal, A., Mehta, S., Mittal, A. Journal of Real-Time Image Processing, 11 (1), pp. 93–109. (2016) [Google Scholar]
  34. Raghunadha Reddy, T., Vishnu Vardhan, B., Vijayapal Reddy, P. International Journal of Applied Engineering Research, 11 (5), pp. 3092–3102 (2016) [Google Scholar]
  35. Hussaini, S.M., Krishna, G., Gupta, A.K., Singh, S.K. Journal of Manufacturing Processes, 18, pp. 151–158 (2015) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.