EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 336 (2022) E3S Web Conf., 336 (2022) 00038 References
Open Access
Issue
E3S Web Conf.
Volume 336, 2022
The International Conference on Energy and Green Computing (ICEGC’2021)
Article Number 00038
Number of page(s) 7
DOI https://doi.org/10.1051/e3sconf/202233600038
Published online 17 January 2022
  1. P. Atkin and M. M. Farid, “Improving the efficiency of photovoltaic cells using PCM infused graphite and aluminium fins,” Sol. Time of day (hr) Energy, vol. 114, pp. 217–228, 2015 [Google Scholar]
  2. K. Kant, A. Shukla, A. Sharma, and P. Henry, experiment results and results of prediction models. “Thermal response of poly-crystalline silicon photovoltaic panels : Numerical simulation and experimental study,” Sol. Energy, vol. 134, pp. 147–155, (2016) [CrossRef] [Google Scholar]
  3. J. K. Tonui and Y. Tripanagnostopoulos, “Aircooled PV/T solar collectors with low cost performance improvements,” Sol. Energy, vol. 81, pp. 498–511, (2007) [CrossRef] [Google Scholar]
  4. H. Pierrick, M. Christophe, G. Leon, and D. Patrick, “Dynamic numerical model of a high efficiency PV-T collector integrated into a domestic hot water system,” Sol. Energy, vol. 111, pp. 68–81, (2015) [CrossRef] [Google Scholar]
  5. J. H. Eckstein, “Detailed Modelling of Phtovoltaic System Components,” M.S. Thesis. Madison: University of Wisconsin; p. 32–40, (1990) [Google Scholar]
  6. R. Salehi, A. Jahanbakhshi, M. Reza Golzarian, and M. Khojastehpour, “Evaluation of solar panel cooling systems using anodized heat sink equipped with thermoelectric module through the parameters of temperature, power and efficiency,” Energy Convers. Manag. X, vol. 11, p. 100102, (2021) [Google Scholar]
  7. G. Notton, C. Cristofari, M. Mattei, and P. Poggi, “Modelling of a double-glass photovoltaic module using finite differences,” Appl. Therm. Eng., vol. 25, pp. 2854–2877, (2005) [CrossRef] [Google Scholar]
  8. J. C. Sánchez Barroso, N. Barth, J. P. M. Correia, S. Ahzi, and M. A. Khaleel, “A computational analysis of coupled thermal and electrical behavior of PV panels,” Sol. Energy Mater. Sol. Cells, vol. 148, pp. 73–86, (2016) [CrossRef] [Google Scholar]
  9. M. Mattei, G. Notton, C. Cristofari, M. Muselli, and P. Poggi, “Calculation of the polycrystalline PV module temperature using a simple method of energy balance,” Renew. Energy, vol. 31, pp. 553–567, (2006) [CrossRef] [Google Scholar]
  10. M. Koehl, M. Heck, S. Wiesmeier, and J. Wirth, “Modeling of the nominal operating cell temperature based on outdoor weathering,” Sol. Energy Mater. Sol. Cells, vol. 95, pp. 1638–1646, (2011) [CrossRef] [Google Scholar]
  11. S. Kurtz et al., “Evaluation of High-Temperature Exposure of Photovoltaic Modules: Preprint,” Nrel, pp. 2399–2404, (2009) [Google Scholar]
  12. E. Skoplaki, A. G. Boudouvis, and J. A. Palyvos, “A simple correlation for the operating temperature of photovoltaic modules of arbitrary mounting,” Sol. Energy Mater. Sol. Cells, vol. 92, pp. 1393–1402, (2008) [CrossRef] [Google Scholar]
  13. A. D. Jones and C. P. Underwood, “A thermal model for photovoltaic systems,” Fuel Energy Abstr., vol. 43, p. 199, (2002) [Google Scholar]
  14. F. Sarhaddi, S. Farahat, H. Ajam, A. Behzadmehr, and M. Mahdavi Adeli, “An improved thermal and electrical model for a solar photovoltaic thermal (PV/T) air collector,” Appl. Energy, vol. 87, pp. 2328–2339, (2010) [CrossRef] [Google Scholar]
  15. Y. Lee and A. A. O. Tay, “Finite element thermal analysis of a solar photovoltaic module,” Energy Procedia, vol. 15, pp. 413–420, (2012) [CrossRef] [Google Scholar]
  16. S. Armstrong and W. G. Hurley, “A thermal model for photovoltaic panels under varying atmospheric conditions,” Appl. Therm. Eng., vol. 30, pp. 1488–1495,( 2010) [CrossRef] [Google Scholar]
  17. G. M. Tina and S. Scrofani, “Electrical and thermal model for PV module temperature evaluation,” Proc. Mediterr. Electrotech. Conf. MELECON, pp. 585–590, (2008) [Google Scholar]
  18. D. L. King, W. E. Boyson, and J. A. Kratochvil, “Photovoltaic array performance model,” Sandia Rep. No. 2004-3535, vol. 8, pp. 1–19, (2004) [Google Scholar]
  19. A. Hasan, S. J. McCormack, M. J. Huang, and B. Norton, “Evaluation of phase change materials for thermal regulation enhancement of building integrated photovoltaics,” Sol. Energy, vol. 84, pp. 1601–1612,(2010) [Google Scholar]
  20. M. Emam and M. Ahmed, “Cooling concentrator photovoltaic systems using various configurations of phase-change material heat sinks,” Energy Convers. Manag., vol. 158, no. January, pp. 298–314, (2018) [Google Scholar]
  21. J. cheng Zhou, Z. Zhang, H. jian Liu, and Q. Yi, “Temperature distribution and back sheet role of polycrystalline silicon photovoltaic modules,” Appl. Therm. Eng., vol. 111, pp. 1296–1303, (2017) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.