Open Access
Issue |
E3S Web Conf.
Volume 343, 2022
52nd AiCARR International Conference “HVAC and Health, Comfort, Environment - Equipments and Design for IEQ and Sustainability”
|
|
---|---|---|
Article Number | 01001 | |
Number of page(s) | 20 | |
Section | Research, Energy Efficiency and Sustainability | |
DOI | https://doi.org/10.1051/e3sconf/202234301001 | |
Published online | 08 March 2022 |
- AiCARR, http://www.aicarr.org/Pages/Normative/FOCUS_COVID-19_IT.aspx (2020) [Google Scholar]
- ASHRAE, Fundamentals Handbook, p. cap. 34 (2017) [Google Scholar]
- ASHRAE, Systems and Equipment Handbook, p. cap. 12 (2016) [Google Scholar]
- TAB Journal. The Magazine of the Associated Air Balance Council. Spring 2011. Washington, D.C (2011) [Google Scholar]
- SMACNA Sheet Metal and Air Conditioning Contractors’ National Association. Vienna, Virginia. HVAC Systems Duct Design (2006) [Google Scholar]
- SMACNA Hvac Air Duct Leakage Test Manual (2012) [Google Scholar]
- ANSI/ASHRAE 215-2018 Method of Test to Determine Leakage of Operating HVAC Air-Distribution Systems (2018) [Google Scholar]
- EN 12599, Ventilation for buildings - Test procedures and measurement methods to hand over air conditioning and ventilation systems (2012) [Google Scholar]
- EN 13403, Ventilation for buildings - Non-metallic ducts - Ductwork made from insulation ductboards (2003) [Google Scholar]
- EN 1751, Ventilation for buildings - Air terminal devices - Aerodynamic testing of damper and valves (2014) [Google Scholar]
- EN 1507 Ventilation for buildings - Sheet metal air ducts with rectangular section -Requirements for strength and leakage (2007) [Google Scholar]
- EN 15727, Ventilation for buildings. Ducts and ductwork components, leakage classification and testing (2010) [Google Scholar]
- ASHRAE Standard 193-2010 (RA 2014) --Method of Test for Determining the Airtightness of HVAC Equipment (2014) [Google Scholar]
- Pat Brooks HVAC Duct Air Leakage –- SMACNA technical resources (2019) [Google Scholar]
- C. Aydin, B. Ozerdem - Air leakage measurement and analysis in duct systems Energy and Buildings 38 207–213 (2006) [Google Scholar]
- AiCARR, Manuale di ausilio alla progettazione termotecnica - Aeraulica, (2022) [Google Scholar]
- ANSI/ASHRAE 62: 2019 Ventilation for Acceptable Indoor Air Quality (2019) [Google Scholar]
- A. Cavallini, F. Busato, F. Pregliasco Remarks on the air recirculation in HVAC systems during the SARS-CoV-2 outbreak: the case of all-air ducted plants AiCARR Journal / Vol 63, n. 4, 50 - 55, (2020) [Google Scholar]
- F. Pedranzini -Impianti HVAC e SARS-CoV-2, dobbiamo ripensare la progettazione? AiCARR Journal Vol 66 (2021) [Google Scholar]
- AICARR - Protocollo per la riduzione del rischio da diffusione del SARS-CoV2-19 mediante gli impianti di climatizzazione e ventilazione esistenti (2020) [Google Scholar]
- F. Pedranzini, L. Cavina. A. De Piccoli, D. Rossi, - Solutions for full-outdoor-air operation of air rooftop units with direct expansion circuit and integrated recirculation, 52ND AiCARR International Conference, Vicenza Italy (2021) [Google Scholar]
- ISO16890:2016 -Air filters for general ventilation — Part 1: Technical specifications, requirements and classification system based upon particulate matter efficiency (ePM)(2016) [Google Scholar]
- EN 1822:2019 -High efficiency air filters (EPA, HEPA and ULPA) - Classification, performance testing, marking (2019) [Google Scholar]
- EN 16798-1:2019 Energy performance of buildings - Ventilation for buildings - Part 1: Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics (2019) [Google Scholar]
- EN 16798-3:2017 Energy performance of buildings - Ventilation for buildings - Part 3: For non-residential buildings - Performance requirements for ventilation and room-conditioning systems(2017) [Google Scholar]
- CEN/TR 16798-2:2019 Energy performance of buildings - Ventilation for buildings - Part 2: Interpretation of the requirements in EN 16798-1 - Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting, and acoustics – Annex I and J (2019) [Google Scholar]
- Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products (2009) [Google Scholar]
- Commission Regulation (EU) No 1253/2014 of 7 July 2014 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for ventilation units. (2014) [Google Scholar]
- M. Vio Il recupero di calore dall’aria espulsa –Guida Aicarr (2014) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.