Open Access
E3S Web Conf.
Volume 349, 2022
10th International Conference on Life Cycle Management (LCM 2021)
Article Number 09004
Number of page(s) 6
Section Digitalization in Circular Economy and Sustainable Supply Chains
Published online 20 May 2022
  1. Kintscher, L., Lawrenz, S., Poschmann, H., Sharma, P., 2020, Recycling 4.0Digitalization as a Key for the Advanced Circular Economy, Journal of Communications, 15:652–660, doi:10.12720/jcm.15.9.652-660. [CrossRef] [Google Scholar]
  2. Lawrenz, S., Nippraschk, M., Wallat, P., Rausch, A., Goldmann, D., et al., 2021, Is it all about Information ? The Role of the Information Gap between Stakeholders in the Context of the Circular Economy, 28th CIRP Conference on Life Cycle Engineering (LCE). [Google Scholar]
  3. Kirchherr, J., Reike, D., Hekkert, M., 2017, Conceptualizing the circular economy: An analysis of 114 definitions, Resources, Conservation and Recycling, 127/September:221–232, doi:10.1016/j.resconrec.2017.09.005. [Google Scholar]
  4. Martens, H., Goldmann, D. R., 2016, Fachbuch für Lehre und Praxis. Springer. [Google Scholar]
  5. Rowley, J., 2007, The wisdom hierarchy: representations of the DIKW hierarchy, Journal of Information Science, 33/2:163–180, doi:10.1177/0165551506070706. [CrossRef] [Google Scholar]
  6. Lawrenz, S., Rausch, A., 2021, Don`t Buy A Pig In A Poke A Framework for Checking Consumer Requirements In A Data Marketplace, Proceedings of the 54th Hawaii International Conference on System Sciences, 0:4663–4672, doi:10.24251/hicss.2021.566. [Google Scholar]
  7. Knieke, C., Lawrenz, S., Fröhling, M., Goldmann, D., Rausch, A., 2019, Predictive and Flexible Circular Economy Approaches for Highly Integrated Products and their Materials as Given in E-Mobility and ICT, in E-Mobility and Circular Economy, pp. 22–31. [Google Scholar]
  8. Kintscher, L., Lawrenz, S., Poschmann, H., 2021, A Life Cycle Oriented DataDriven Architecture for an Advanced Circular Economy, Procedia CIRP, 98:318–323, doi:10.1016/J.PROCIR.2021.01.110. [CrossRef] [Google Scholar]
  9. Wallat, P., Lohrengel, L., Der Einfluss der Fügetechnik auf die Konstruktion von Produkten für das Kreislaufwirtschaftssystem. DS 111, Proceedings of the 32nd Symposium Design for X. The Design Society 27 and 2021 [Google Scholar]
  10. Wallat, P., Lohrengel, L., Erstellung einer Materialdatenbank zur digitalen Systematisierung im Konstruktionsprozess für kreislaufgerechte Produkte. 4. Symposium Materialtechnik. Band 10. 2021, S. 526–536 [Google Scholar]
  11. Wallat, P., Lohrengel, L., Wirtschaftliche Einflussfaktoren auf eine kreislaufgerechte Produktentwicklung. In: Langefeld, O. u. Mrotzek-Blöß, A. (Hrsg.): Forschungsfeld Rohstoffsicherung und Ressourceneffizienz. Forschungsfeldkolloquium 2020. Clausthal-Zellerfeld: Papierflieger 2020, S. 69–79 [Google Scholar]
  12. Wallat, P., Lohrengel, L., Die Einbettung kreislaufgerechter Konstruktionsansätze in den Produktentstehungsprozess. In: 18. Gemeinsames Kolloquium Konstruktionstechnik 2020: Nachhaltige Produktentwicklung: KT 2020. DuEPublico: Duisburg-Essen Publications online, University of Duisburg-Essen, Germany 2020, S. 163–174 [Google Scholar]
  13. Schindler, M.; Lawrenz, S. Community-Driven Design in Software Engineering. In Proceedings of the 19th International Conference on Software Engineering Research & Practice, Las Vegas, NV, USA, 26–29 July 2021. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.