Open Access
| Issue |
E3S Web Conf.
Volume 358, 2022
5th International Conference on Green Energy and Sustainable Development (GESD 2022)
|
|
|---|---|---|
| Article Number | 02005 | |
| Number of page(s) | 4 | |
| Section | Regular Contributions | |
| DOI | https://doi.org/10.1051/e3sconf/202235802005 | |
| Published online | 27 October 2022 | |
- Jiang Tang, Xuedong Wang, Yuzhu Zhao, et al. Analysis of Performance Indicators and Peak Regulation Capacity of CondensingUnit After High Back Pressure Retrofit for Heating[J]. Power Generation Technology, 2018, 39(05):455–461. [Google Scholar]
- Haisheng Yang, Tuo Zhang, GuangTong Tang, et al. Influence of Zero-Output Technology of Low-Pressure Cylinder on Deep Peak Regulation Performance of Heating Unit and Compensation Standard for Peak Regulation[J]. Journal of Engineering for Thermal Energy and Power, 2020, 35(06):268–273. [Google Scholar]
- Qinpeng Zhang, Xuedong Wang, Feng Li, et al. Analysis of Heating Capacity and Peak-regulating Capacity of 330 MW Steam Turbine Unit With Low-pressure Cylinder off Operation[J]. Shandong Electric Power, 2020, 47(12):72–76. [Google Scholar]
- Lihong Zhang, Fusuo Liu, Wei Li, et al. Minimum startup method of a DC near-field thermal power unit based on a unit voltage supporting effect[J]. Power System Protection and Control, 2020, 48(23):141–147. [Google Scholar]
- Xuehui Zhang, Xingsen Yang, Gang Xin, et al. Experimental study on deep peak regulation operation of coal - fired thermal power unit[J]. Clean Coal Technology, 2022, 28(04):144–150. [Google Scholar]
- Lingkai Zhu, Wei Zheng, Junshan Guo, et al. Application of Heat Load Distribution in Improving Peak-shaving Ability of Plant[J]. Power System Engineering, 2019, 35(06):43–46+49. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.