Open Access
| Issue |
E3S Web Conf.
Volume 359, 2022
The 7th International Conference on Energy, Environment, Epidemiology and Information System (ICENIS 2022)
|
|
|---|---|---|
| Article Number | 01007 | |
| Number of page(s) | 13 | |
| Section | Energy | |
| DOI | https://doi.org/10.1051/e3sconf/202235901007 | |
| Published online | 31 October 2022 | |
- D. Research and Y. Zhang, Springer Theses Recognizing Outstanding Ph Key Technologies of Magnetically Coupled Resonant Wireless Power Transfer. . [Google Scholar]
- Z. D. Wang, Y. Gu, and Y. S. Wang, “Journal of Magnetism and Magnetic Materials A review of three magnetic NDT technologies,” vol. 324, pp. 382–388, 2012. [CrossRef] [Google Scholar]
- L. Xie, B. Gao, G. Y. Tian, J. Tan, B. Feng, and Y. Yin, “Sensors and Actuators A : Physical Coupling pulse eddy current sensor for deeper defects NDT,” vol. 293, pp. 189–199, 2019. [Google Scholar]
- L. S. Rosado, J. C. Gonzalez, T. G. Santos, P. M. Ramos, and M. Piedade, “Sensors and Actuators A : Physical Geometric optimization of a differential planar eddy currents probe for non-destructive testing,” vol. 197, pp. 96–105, 2013. [Google Scholar]
- D. Wu, F. Cheng, F. Yang, and C. Huang, “Non-destructive testing for carbon-fiber-reinforced plastic ( CFRP ) using a novel eddy current probe,” vol. 177, no. April, 2019. [Google Scholar]
- C. G. Camerini et al., “Correlation of eddy current signals obtained from EDM notches and fatigue cracks,” J. Mater. Res. Technol., vol. 8, no. 5, pp. 4843–4848, 2019. [CrossRef] [Google Scholar]
- S. Ghanei, M. Kashefi, and M. Mazinani, “Comparative study of eddy current and Barkhausen noise nondestructive testing methods in microstructural examination of ferrite-martensite dual-phase steel,” J. Magn. Magn. Mater., vol. 356, pp. 103–110, 2014. [CrossRef] [Google Scholar]
- W. Cai, C. Jomdecha, Y. Zhao, L. Wang, S. Xie, and Z. Chen, “Quantitative evaluation of electrical conductivity inside stress corrosion crack with electromagnetic NDE methods: QNDE on Distributed Conductivity of SCC,” Philos. Trans. R. Soc. A Math. Phys. Eng. Sci., vol. 378, no. 2182, 2020. [Google Scholar]
- W. Zhong, D. Xu, R. Shu, Y. Hui, and B. Distance, Wireless Power Transfer. . [Google Scholar]
- G. Yilmaz and C. Dehollain, Wireless Power Transfer. 2017. [Google Scholar]
- Y. Noguchi, M. Tsunokai, K. Nakata, and N. Takeda, “Applicability of eddy current technique in in-bore NDT tool for ITER hydraulic pipe welds,” Fusion Eng. Des., vol. 146, no. May, pp. 2571–2576, 2019. [CrossRef] [Google Scholar]
- K. Ogata, “Modern Control Engineering,” pp. 161–162. [Google Scholar]
- L. Barbato, N. Poulakis, A. Tamburrino, T. Theodoulidis, and S. Ventre, “Solution and Extension of a New Benchmark Problem for Eddy-Current Nondestructive Testing,” IEEE Trans. Magn., vol. 51, no. 7, 2015. [CrossRef] [Google Scholar]
- V. Moroz, D. Calus, and O. Makarchuk, “Fractional Order Transfer Function for Eddy Current Simulation,” no. February, 2018. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.