Open Access
Issue
E3S Web Conf.
Volume 360, 2022
2022 8th International Symposium on Vehicle Emission Supervision and Environment Protection (VESEP2022)
Article Number 01062
Number of page(s) 7
DOI https://doi.org/10.1051/e3sconf/202236001062
Published online 23 November 2022
  1. Z. Y. Xie, S. Q. Chen, L. J. Tan, etc. Study of temperature distribution of mold under temperature gradient in rapid heating process [J]. China Plastics (2019), 33(4), 59–65. (in Chinese) [Google Scholar]
  2. K. Wu, H. Zhou, B. L. Wang, etc. Numerical Simulation and experiments of a new rapid mold heating method for rapid heat cycle molding [J]. Engineering Plastics Application (2017), 45(2), 77–81. (in Chinese) [Google Scholar]
  3. K. Wua, H. Zhou, B.L. Wang, etc. Effect of gap on thermal response efficiency in heating process of RHCM [J]. Engineering Plastics Application (2017), 45(7), 73–79. (in Chinese) [Google Scholar]
  4. J. G. Li, H. Liu, K. Lin, etc. Theory and experimental research on the multiple source heat conduction inversion of the polymer curing reaction mould heating system[J]. Journal of mechanical engineering (2016), 52(14), 174–181. (in Chinese) [Google Scholar]
  5. J. C. Wang, L. Chen, G. L. Wang. Research on thermal response analysis of electric heating rapid thermal cycle injection mold [J]. Mold Technology (2013), 6, 6–12. (in Chinese) [Google Scholar]
  6. T. D. Li, Z. Y. Shen, Jia Yadong, etc. Study on optimization of heating system of electric-thermal variable-temperature injection mold[J]. Plastic Industry (2019), 47(01):,51–55+78. (in Chinese) [Google Scholar]
  7. Yuk-Jae Kwon, Hong-Kyu Kwon. Computer aided engineering (CAE) simulation for the design optimization of gate system on high pressure die casting (HPDC) process. Robotics and Computer-Integrated Manufacturing (2019), 55, Part B, 147–153. [CrossRef] [Google Scholar]
  8. F. Wittemann, R. Maertens, L. Kärger, F. Henning. Injection molding simulation of short fiber reinforced thermosets with anisotropic and non-Newtonian flow behavior. Composites Part A: Applied Science and Manufacturing (2019), 124, Article 105476. [CrossRef] [Google Scholar]
  9. W. Rossine, M. Souza, N. Bouaanani, A. E. Martinelli, U. T. Bezerra. Numerical simulation of the thermomechanical behavior of cement sheath in wells subjected to steam injection. Journal ofPetroleum Science and Engineering (2018), 167, 664–673. [CrossRef] [Google Scholar]
  10. H. Liu, P. P. Jia. Method of rising simulation efficiency for tube bends [J]. Computer Simulation (2015), 32 (10), 234–238. (in Chinese) [Google Scholar]
  11. Y. Chen, H. D. Cai. Numerical simulation analysis of thermo-mechanical coupling of injection mold for GPS navigation shell [J]. Plastic Industry (2020), 48(12): 96–100. (in Chinese) [Google Scholar]
  12. H. Liu, H. J. Chen, F. Chen, etc. Fast Algorithm for Heating Injection Mold by Water [J]. Journal of Physics: Conference Series, 042018 (2020.11) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.