Open Access
Issue
E3S Web Conf.
Volume 363, 2022
XV International Scientific Conference on Precision Agriculture and Agricultural Machinery Industry “State and Prospects for the Development of Agribusiness - INTERAGROMASH 2022”
Article Number 03022
Number of page(s) 8
Section Precision Agriculture. Yield Monitoring and Estimation
DOI https://doi.org/10.1051/e3sconf/202236303022
Published online 14 December 2022
  1. V. A. Kravchenko et al., Agrarnaya Nauka 37(100), 36 [Google Scholar]
  2. S. Senkevich, V. Kravchenko, P. Lavrukhin, P. Ivanov, A. Senkevich, Theoretical study of the effect of an elastic-damping mechanism in the tractor transmission on a machine-tractor unit performance while sowing. Handbook of Research on Smart Computing for Renewable Energy and Agro-Engineering. Ser. “Advances in environmental engineering and green technologies” Hershey, PA, USA, 2020) [Google Scholar]
  3. V. Shehovtsov, N. Sokolov-Dobrev, M. Lyashenko et al., Mechanika 20(2), 190–196 (2014) [CrossRef] [Google Scholar]
  4. V. V. Shekhovtsov et al., Decreasing of the dynamic loading of tractor transmission by means of change of the reactive element torsional stiffness, In Proceedings of the International Conference on Industrial Engineering, ICIE 2016 Procedia Engineering, 150, 1239–1244 (2016) [Google Scholar]
  5. D. D. Nekhoroshev, D. A. Nekhoroshev, P. V. Konovalov, A. Yu. Popov, Research on experimental machine-tractor aggregates equipped with pneumatic hydraulic planetary clutch at road works. IOP Conference Series: Earth and Environmental Science, 012016 (2021) [Google Scholar]
  6. A. S. Ovchinnikov, N. G. Kuznetsov, D. D. Nekhoroshev, et al., ARPN Journal of Engineering and Applied Sciences 13, 8776 (2018) [Google Scholar]
  7. N. G. Kuznetsov, A. A. Shatokhin, D. D. Nekhoroshev, S. D. Fomin, D. A. Nekhoroshev, Mathematical model studying the operation of a machine-tractor unit with a tractor “dt-175s” with an elastic element in the linkage system. IOP Conference Series: Earth and Environmental Scicnge. Ser. “International Conference on Engineering Studies and Cooperation in Global Agricultural Production”, 012076 (2021) [Google Scholar]
  8. S. Senkevich, V. Kravchenko, V. Duriagina, A. Senkevich, E. Vasilev, Advances in Intelligent Systems and Computing 866, 168-177 (2019) [CrossRef] [Google Scholar]
  9. S. Senkevich, D. Pavkin, V. Duryagina, I. Gamolina, V. Kravchenko, Advances in Intelligent Systems and Computing 1072, 204-213 (2020) [Google Scholar]
  10. S. Senkevich, V. Bolshev, E. Ilchenko, et al., Elastic damping mechanism optimization by indefinite lagrange multipliers, In Proceedinngs of the IEEE Access 9, 71784–71804 (2021) [Google Scholar]
  11. V. Kravchenko, L. Kravchenko, V. Oberemok, A. Avanesyan, Analysis of the influence of design parameters on the agro-ecological qualities of tractor tires, In Proceedings of the Fundamental and Applied Scientific Research in the Development of Agriculture in the Far East (AFE 2021), 032010 (2021) [Google Scholar]
  12. O. Didmanidze, A. Dorokhov, M. Mosyakov, et al., Results of ultrasonic effects studied in pre-sowing barley seed stimulation, In Proceedings of the Fundamental and Applied Scientific Research in the Development of Agriculture in the Far East (AFE 2021), 022119 (2021) [Google Scholar]
  13. A. Nesmiyan et al., Lecture Notes in Networks and Systems 246, 88–101 (2022) [CrossRef] [Google Scholar]
  14. O. González, C. E. I. Coronel, E. López, C. A. Recarey, and M. Herrera, Journal of Terramechanics 63, 61–67 (2016) [CrossRef] [Google Scholar]
  15. H. Taghavifar, A. Mardani, Journal of the Saudi Society of Agricultural Sciences 13(1), 35–43 (2014) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.