Open Access
Issue |
E3S Web Conf.
Volume 368, 2023
4th African Regional Conference on Geosynthetics (GeoAfrica 2023)
|
|
---|---|---|
Article Number | 02016 | |
Number of page(s) | 10 | |
Section | TECHNICAL PAPERS: Reinforcement | |
DOI | https://doi.org/10.1051/e3sconf/202336802016 | |
Published online | 17 February 2023 |
- A. Marston, A. O. Anderson, The Theory of Loads on Pipes in Ditches and Tests of Cement and Clay Drain Tile and Sewer Pipe, Iowa State College of Agriculture, (1913). [Google Scholar]
- M. G. Spangler, Protection of underground structures by arch action associated with the imperfect ditch method of construction, Proceedings of the Symposium on Soil Structure Interaction, University of Arizona, Tucson, Arizona, (1934). [Google Scholar]
- K. Terzaghi, Theoretical Soil Mechanics, John Wiley and Sons, New York, (1943). [CrossRef] [Google Scholar]
- M. G. Spangler, R. L. Handy, Loads on underground conduits, Soil Engineering, 3rd Edition, pp. 658–686, (1973). [Google Scholar]
- J. M. Duncan, Soil-culvert interaction method for design of metal culverts, Transportation Research Record 678. ‖, Transportation Research Board, Washington, D.C., USA, (1978). [Google Scholar]
- K. M. El-Sawy, Three-dimensional modeling of soil-steel culverts under the effect of truckloads, Thin-Walled Structures, Volume 41, Issue 8, (2003). [Google Scholar]
- AWWA, Steel pipe: a guide for design and installation. 4th ed, AWWA manual, M11. Denver, CO: American Water Works Association, (2004). [Google Scholar]
- L. Pettersson, Full scale Tests and structural evaluation of soil steel flexible culverts with low height of cover., TRITA-BKN, PhD. Thesis, Dep. of Civil and Architectural Engineering, Div. of Structural Design and Bridges, Royal Institute of Technology, KTH, Stockholm, Sweden, (2007). [Google Scholar]
- Canadian Highway Bridge Design Code, CAN/CSA-S6-14 – Canadian Standards Association (CSA). Mississauga, Ontario, (2014). [Google Scholar]
- L. Pettersson, H. Sundquist, Design of soil-steel composite bridges, TRITA-BKN Rep. No. 112, 5th Edition, Dept. of Architectural and Civil Engineering, Royal Institute of Technology, KTH, Stockholm, Sweden, (2014). [Google Scholar]
- H. El Naggar, A. Turan, A. Valsangkar, Earth Pressure Reduction System Using Geogrid Reinforced Platform Bridging for Buried Utilities. Journal of Geotechnical and Geoenvironmental Engineering, ASCE, (2015). [Google Scholar]
- A. Artigas, A. Monsalve, K. Sipos, O. Bustos, J. Mena, R. Seco, N. Garza-Montes-de-Oca, Development of accelerated wet–dry cycle corrosion test in marine environment for weathering steels. Institute of Materials, Minerals and Mining, (2015). [Google Scholar]
- American Association of State Highway and Transportation Officials, Washington, DC, (2017). [Google Scholar]
- I. M. Ezzeldin, Design of Soil Steel Composite Bridges (SSCBs) and Analysis of Associated Arching Actions. Civil Engineering Department, Faculty of Engineering, Cairo University, Giza, Egypt, (2019). [Google Scholar]
- A. Mahgoub, H. El Naggar, Using TDA as an Engineered Stress Reduction Fill Over Pre-existing Buried Pipes. Journal of Pipeline Systems, ASCE, (2019). [Google Scholar]
- J. Kang, Finite element analysis for deeply buried concrete pipes in proposed imperfect trench installations with expanded polystyrene (EPS) foams, Engineering Structures, (2019). [Google Scholar]
- I. M. Ezzeldin, H. El Naggar, Three-dimensional finite element modeling of corrugated metal pipes. Transportation Geotechnics, Volume 27, (2021). [Google Scholar]
- I. M. Ezzeldin, H. El Naggar, Earth pressure distribution around flexible arch pipes, Engineering Structures, Volume 237, (2021). [Google Scholar]
- PLAXIS 2D, Reference Manual, (2022). [Google Scholar]
- PLAXIS 2D, Material Model Manual, (2022). [Google Scholar]
- I. M. Ezzeldin, H. El Naggar, J. Newhook, G. Jarjoura, Accelerated wet/dry corrosion test for buried corrugated mild steel, Case Studies in Construction Materials, (2022). [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.