Open Access
| Issue |
E3S Web Conf.
Volume 368, 2023
4th African Regional Conference on Geosynthetics (GeoAfrica 2023)
|
|
|---|---|---|
| Article Number | 02031 | |
| Number of page(s) | 8 | |
| Section | TECHNICAL PAPERS: Stabilization | |
| DOI | https://doi.org/10.1051/e3sconf/202336802031 | |
| Published online | 17 February 2023 | |
- L. Vollmert, G. Bräu, Performance of geogrid reinforced and stabilized base courses, in Proceedings of the 11th International Conference on Geosynthetics, Korea (2018) [Google Scholar]
- BRE470, Working Platform for Tracked Plants: Good Practice Guide to the Design, Installation, Maintenance and Repair of Ground-Supported Working Platforms. Watford, UK: Building Research Establishment (2004) [Google Scholar]
- L. Prandtl, Über die Eindringungsfestigkeit (Härte) plastischer Baustoffe und die Festigkeit von Schneiden, Zeitschrift für Angewandte Mathematik und Mechanik, Basel, Switzerland, Vol. 1, No. 1, 15–20 (1921) [CrossRef] [Google Scholar]
- K. Terzaghi, Theoretical soil mechanics. John Wiley & Sons, New York (1943) [CrossRef] [Google Scholar]
- G.G. Meyerhof, Some recent research on the bearing capacity of foundations, Can. Geotech. J. 1, 16–26 (1963) [CrossRef] [Google Scholar]
- J.B. Hansen, A revised and extended formula for bearing capacity, Danish Geotechnical Institute, Copenhagen (1970) [Google Scholar]
- A.S. Vesic, Bearing capacity of shallow foundations, Foundation Engineering Handbook, 2nd Edition, Van Nostrand Reinhold, New York, NY, 121–147 (1975) [Google Scholar]
- L. Bowles, Foundation analysis and design, McGraw-Hill (1996) [Google Scholar]
- K.S. Miller, Technical Note on Use of BR470 in Soft Clay (2013) [Google Scholar]
- A.M. Hanna, G.G. Meyerhof, Design charts for ultimate bearing capacity of foundations on sand overlying soft clay, Canadian Geotechnical Journal, 17(2), 300–303 (1980) [CrossRef] [Google Scholar]
- Temporary Works Forum, Design of granular working platforms for construction plant, A guide to good practice, TWf2019: 02, Temporary Works Forum, c/o Institution of Civil Engineers, London, England (2019) [Google Scholar]
- P. Gussmann, Die Methode der kinematischen Elemente und adaptive Optimierung, Bauingenieur, 67(9), 409–417 (1992). [Google Scholar]
- Fides GeoStability software, User manual (2019) [Google Scholar]
- A. Khansari, L. Vollmert, C. Quirk, J. Klompmaker, Prediction Models for Deformation and Punching Shear Resistance of Geogrid-reinforced Working Platforms under Tracked Plant, Geosynthetics International, Kansas City, USA (2021a) [Google Scholar]
- C. Moormann, J. Lehn, M. Tazl, R. Worbes, Messung des Trag- und Verformungs-verhaltens einer Arbeitsplattform für Mobilkrane in einem Windpark, FS KGEO (2017) [Google Scholar]
- C. Moormann, R. Worbes, T. Lerner, J. Henkel, Standsicherheit und Gebrauchs-tauglichkeit von mobilen Baumaschinen – Feldversuche zur Interaktion zwischen Kettenfahrwerken und Baugrund, 35. Baugrundtagung, Stuttgart (2018) [Google Scholar]
- A. Khansari, L. Vollmert, J. Klompmaker, A. Shahkolahi, Ultimate resistance of geogrid-reinforced working platforms for tracked plants over cohesive subgrade, in Proceedings of the 20th International Conference on Soil Mechanics and Geotechnical Engineering, Sydney (2021b) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.