EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 464 (2023) E3S Web Conf., 464 (2023) 06004 References
Open Access
Issue
E3S Web Conf.
Volume 464, 2023
The 2nd International Conference on Disaster Mitigation and Management (2nd ICDMM 2023)
Article Number 06004
Number of page(s) 9
Section Public Health Risk, Including Covid-19
DOI https://doi.org/10.1051/e3sconf/202346406004
Published online 18 December 2023
  1. Y. Haryanto, B.S. Gan, A. Maryoto, Int. J. Technol. 8, 132 (2017) [CrossRef] [Google Scholar]
  2. Y. Haryanto, B.S. Gan, A. Widyaningrum, A. Maryoto, J. Teknol. 6, 233 (2017) [Google Scholar]
  3. Y. Haryanto, B.S. Gan, A. Widyaningrum, N.G. Wariyatno, A. Fadli, J. Teknol. 80, 145 (2018) [Google Scholar]
  4. Y. Haryanto, H.-T. Hu, A.L. Han, A.T. Atmajayanti, D.L.C. Galuh, B. A. Hidayat, J. Teknol. 81, 145 (2019) [Google Scholar]
  5. Y. Haryanto, A.L. Han, H.-T. Hu, F.-P. Hsiao, B.A. Hidayat, A. Widyaningrum, J. Chinese Inst. Eng. 44, 193 (2021) [CrossRef] [Google Scholar]
  6. F.-P. Hsiao, P.-W. Weng, Y.-A. Li, T. Kawamoto, Y.-C. Lin, Y. Haryanto, Compos. Struct. 324, 117562 (2023) [CrossRef] [Google Scholar]
  7. L. C. Bank, Composites for construction: structural design with FRP materials (John Wiley & Sons, New Jersey, 2006) [CrossRef] [Google Scholar]
  8. C.E. Bakis, L.C. Bank, V.L. Brown, E. Cosenza, J.F. Davalos, J.J. Lesko, A. Machida, S.H. Rizkalla, T.C. Triantafillou, J. Compos. Constr. 6, 73 (2002) [CrossRef] [Google Scholar]
  9. J. G. Teng, J.-F. Chen, S. Smith, L. Lam, FRP- strengthened RC structures (John Wiley & Sons, New York, 2002) [Google Scholar]
  10. Y. Haryanto, H.-T. Hu, A.L. Han, F.-P. Hsiao, C.-J. Teng, B.A. Hidayat, L. Nugroho, Period. Polytech. Civ. Eng. 65, 878 (2021) [Google Scholar]
  11. L. De Lorenzis, J.G. Teng, Compos. Part B Eng. 38, 119 (2007) [CrossRef] [Google Scholar]
  12. R. Seracino, M.R. Raizal Saifulnaz, D.J. Oehlers, J. Compos. Constr. 11, 62 (2007) [CrossRef] [Google Scholar]
  13. R. Seracino, N.M. Jones, M.S.M. Ali, M.W. Page, D.J. Oehlers, J. Compos. Constr. 11, 401 (2007) [CrossRef] [Google Scholar]
  14. L. De Lorenzis, A. Nanni, J. Compos. Constr. 5, 114 (2001) [CrossRef] [Google Scholar]
  15. J.A.O. Barros, A.S. Fortes, Cem. Concr. Compos. 27, 471 (2005) [CrossRef] [Google Scholar]
  16. J.G. Teng, L. De Lorenzis, B. Wang, R. Li, T.N. Wong, L. Lam, J. Compos. Constr. 10, 92 (2006) [CrossRef] [Google Scholar]
  17. Y. Haryanto, H.-T. Hu, A.L. Han, F.-P. Hsiao, C.-J. Teng, B.A. Hidayat, L. Nugroho, Comput. Concr. 28, 347 (2021) [Google Scholar]
  18. A.L. Han, H.-T. Hu, B.S. Gan, F.-P. Hsiao, Y. Haryanto, Arab. J. Sci. Eng. 47, 12685 (2022) [CrossRef] [Google Scholar]
  19. Y. Haryanto, A.L. Han, H.-T. Hu, F.-P. Hsiao, B.S. Gan, L. Nugroho, C.-C. Lin, in Proceedings of the 33rd International Ocean and Polar Engineering Conference, ISOPE, 19-23 June 2023, Ottawa, Canada (2023) [Google Scholar]
  20. Y. Haryanto, F.-P. Hsiao, H.-T. Hu, A.L. Han, A. Wiranata Chua, F. Salim, L. Nugroho, Compos. Struct. 301, 116214 (2022) [CrossRef] [Google Scholar]
  21. S.S. Zhang, Y. Ke, E. Chen, H. Biscaia, W.G. Li, Compos. Struct. 279, 114782 (2022) [CrossRef] [Google Scholar]
  22. I.A. Sharaky, L. Torres, J. Comas, C. Barris, Compos. Struct. 109, 8 (2014) [CrossRef] [Google Scholar]
  23. ACI Committee 440: ACI 440.2R-17 (American Concrete Institute, Farmington Hills, USA, 2017) [Google Scholar]
  24. ACI Committee 318, ACI 318-19 (American Concrete Institute, Farmington Hills, USA, 2019) [Google Scholar]
  25. E.C. Bentz, Sectional analysis of reinforced concrete members (Ph.D. Thesis, University of Toronto, Toronto, Canada, 2000) [Google Scholar]
  26. F.J. Vecchio, M.P. Collins, ACI J. 83, 219 (1986) [Google Scholar]
  27. I.M. Metwally, HBRC J. 8, 99 (2012) [CrossRef] [Google Scholar]
  28. B. Suryanto, R. Morgan, A.L. Han, Civ. Eng. Dimens. 18, 16 (2016) [Google Scholar]
  29. F.J. Vecchio, W. Shim, J. Struct. Eng. 130, 460 (2004) [CrossRef] [Google Scholar]
  30. Y. Haryanto, F.-P. Hsiao, H.-T. Hu, A.L. Han, B.A. Hidayat, L. Nugroho, in AIP Conference Proceedings of the 3rd International Conference on Engineering, Technology and Innovative Researches, ICETIR, 1 September 2021, Purbalingga, Indonesia (2023) [Google Scholar]
  31. Y. Haryanto, H.-T. Hu, A.L. Han, F.-P. Hsiao, N.G. Wariyatno, B.A. Hidayat, J. Eng. Sci. Technol. 16, 3295 (2021) [Google Scholar]
  32. Y. Haryanto, H.-T. Hu, A.L. Han, F.-P. Hsiao, C.-J. Teng, B.A. Hidayat, N.G. Wariyatno, J. Chinese Inst. Eng. Trans. Chinese Inst. Eng. A 44, 553 (2021) [Google Scholar]
  33. S. Das Adhikary, B. Li, K. Fujikake, Int. J. Impact Eng. 47, 24 (2012) [CrossRef] [Google Scholar]
  34. L. Nugroho, Y. Haryanto, H.-T. Hu, F.-P. Hsiao, A.L. Han, G. Pamudji, B.H. Setiadji, Compos. Struct. (to be published) [Google Scholar]
  35. S. Popovics, Cem. Concr. Res. 3, 583 (1973) [CrossRef] [Google Scholar]
  36. A. Porasz, An investigation of the stress-train characteristics of high strength concrete in shear (Ph.D. Thesis, University of Toronto, Toronto, Canada, 1989) [Google Scholar]
  37. E. Hognestad. (Bulletin Series No. 399, Engineering Experiment Station, University of Illinois, Urbana, USA, 1951) [Google Scholar]
  38. H. Xu, H. M. Wen, Int. J. Impact Eng. 60, 76 (2013) [CrossRef] [Google Scholar]
  39. Japan Society of Civil Engineers, Standard specifications for concrete structures 2002, structural performance verification (JSCE, Tokyo, 2002) (in Japanese) [Google Scholar]
  40. M. Seckin, Hysteretic behaviour of cast-in-place exterior beam-column sub-assemblies (Ph.D. Thesis, University of Toronto, Toronto, Canada, 1981) [Google Scholar]
  41. M. Menegotto, P.E. Pinto, Method of analysis for cyclically loaded reinforced concrete plane frames including changes in geometry and non-elastic behavior of elements under combined normal force and bending, in Proceedings of the IABSE Symposium on Resistance and Ultimate Deformability of Structures Acted on by Well Defined Repeated Loads, Lisbon, Portugal (1973) [Google Scholar]
  42. D. Yan, G. Lin, Cem. Concr. Res. 36, 1371 (2006) [CrossRef] [Google Scholar]
  43. R. Faria, J. Oliver, M. Cervera, Int. J. Solids Struct. 35, 1533 (1998) [CrossRef] [Google Scholar]
  44. J.W. Tedesco, J.C. Powell, C.A. Ross, M.L. Hughes, Comput. Struct. 64, 1053 (1997) [CrossRef] [Google Scholar]
  45. M.K. McVay, Spall damage of concrete structures (Department of the Army Hattiesburg, MS, USA, 1988) [Google Scholar]
  46. H. Schuler, C. Mayrhofer, K. Thoma, Int. J. Impact Eng. 32, 1635 (2006) [CrossRef] [Google Scholar]
  47. J. Weerheijm, J.C.A.M. VanDoormaal, Int. J. Impact Eng. 34, 609 (2007) [CrossRef] [Google Scholar]
  48. H. Wu, Q. Zhang, F. Huang, Q. Jin, Int. J. Impact Eng. 32, 605 (2005) [CrossRef] [Google Scholar]
  49. E. Cadoni, K. Labibes, M. Berra, M. Giangrasso, C. Albertini, Mag. Concr. Res. 52, 365 (2000) [CrossRef] [Google Scholar]
  50. F.M. Mellinger, D.L. Birkimer, (Technical Report 4-46. U.S. Army Corps of Engineers, Ohio River Division Laboratories, Cincinnati, Ohio, 1966) [Google Scholar]
  51. R.H. Evans, J. Inst. Civ. Eng. 18, 296 (1942) [CrossRef] [Google Scholar]
  52. D. Watstein, J. Proc. 49, 729 (1953) [Google Scholar]
  53. H. Krawinkler, P.D. Moncarz, Spec. Publ. 73, 1 (1982) [Google Scholar]
  54. F.S. Rostasy, J. Scheuermann, K.H. Sprenger, Betonwerk+Fertigteil-Technik. 50, 393 (1984) [Google Scholar]
  55. J.W. Tedesco, C.A. Ross, J. Press. Vessel Technol. Trans. ASME 120, 398 (1998) [CrossRef] [Google Scholar]
  56. M. Zhang, H.J. Wu, Q.M. Li, F.L. Huang, Int. J. Impact Eng. 36, 1327 (2009) [CrossRef] [Google Scholar]
  57. D.L. Grote, S.W. Park, M. Zhou, Int. J. Impact Eng. 25, 869 (2001) [CrossRef] [Google Scholar]
  58. F.S. Rostasy, K. Hartwich, Int. J. Cem. Compos. Light. Concr. 7, 21 (1985) [CrossRef] [Google Scholar]
  59. L.E. Malvern, C.A. Ross, Dynamic response of concrete and concrete structures (Second Annual Technical Report, AFOSR contract no. F49620-83-K007, 1986) [Google Scholar]
  60. L.E. Malvern, D.A. Jenkins, T. Tang, C.A. Ross, Dynamic compressive testing of concrete, in Proceedings of the 2nd Symposium on the Interaction of Non-Nuclear Munitions with Structures, 15-18 April 1985, Panama City Beach, Florida (1985) [Google Scholar]
  61. Q.M. Li, H. Meng, Int. J. Solids Struct. 40, 343 (2003) [CrossRef] [Google Scholar]
  62. K. Fujikake, B. Li, S. Soeun, J. Struct. Eng. 135, 938 (2009) [CrossRef] [Google Scholar]
  63. K. Fujikake, K. Mori, K. Uebayashi, T. Ohno, J. Mizuno, Constitutive model for concrete materials with high-rates of loading under tri-axial compressive stress states, in Proceedings of the 3rd International Conference on Concrete under Severe Conditions, JSCE, Tokyo (2001) [Google Scholar]
  64. C.A. Ross, J.W. Tedesco, Mater. J. 86, 475 (1989) [Google Scholar]
  65. Comité Euro-International du Béton, CEB-FIP Model code 1990: Design code (Thomas Telford Publishing, 1993) [Google Scholar]
  66. N. Gebbeken, S. Greulich, A new material model for SFRC under high dynamic loadings, in Proceedings of the 11th International Symposium Interaction of the Effects of Munitions with Sructures, ISIEMS, 5 May 2003, Mannheim, Germany (2003) [Google Scholar]
  67. L.J. Malvar, C.A. Ross, ACI Mater. J. 95, 735 (1998) [Google Scholar]
  68. A. Uenishi, C. Teodosiu, Int. J. Plast. 20, 915 (2004) [CrossRef] [Google Scholar]
  69. R.J. Mainstone, Matériaux Constr. 8, 102 (1975) [CrossRef] [Google Scholar]
  70. L.J. Malvar, Mater. J. 95, 609 (1998) [Google Scholar]
  71. F. Lin, Y. Dong, X. Kuang, L. Lu, Mater. 9, (2016) [Google Scholar]
  72. D. Asprone, E. Cadoni, A. Prota, ACI Struct. J. 106, 523 (2009) [Google Scholar]
  73. Comité Euro-International du Béton, Concrete Structures under impact and impulsive loading: CEB Bulletin 187 (Lausanne, Switzerland, 1988) [Google Scholar]
  74. D. Gao, Z. Bao, W. Han, X. Wang, S. Huang, L. Huang, Q. Chen, H. Zhao, Y. Xu, Polymers 15, 2711 (2023) [CrossRef] [PubMed] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.