EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 465 (2023) E3S Web of Conf., 465 (2023) 01006 References
Open Access
Issue
E3S Web of Conf.
Volume 465, 2023
8th International Conference on Industrial, Mechanical, Electrical and Chemical Engineering (ICIMECE 2023)
Article Number 01006
Number of page(s) 5
Section Symposium on Mechanical, Chemical, and Advanced Materials Engineering
DOI https://doi.org/10.1051/e3sconf/202346501006
Published online 18 December 2023
  1. Rural Agrarian Productive Development Program - RURAL AGRO, “Manual of fertilizer with guano from the islands”, 1st ed, Lima-Peru (2018), pp. 23. Available in: technical sheet tara.pdf (agrorural.gob.pe). [Google Scholar]
  2. General Directorate of Agrarian Policies DGPA - DEEIA - MINAGRI, “Bulletin of Production and Trade of the TARA in Peru”, Lima-Peru April (2019), pp. 23, Available in: https://cdn.www.gob.pe/uploads/document/file/419835/produccioncomercio-de-la-tara-peru.pdf. [Google Scholar]
  3. Carlos Villanueva, technical manager of IPEX “Peru has approximately 10 thousand hectares of tara”, Available in: https://agraria.pe/noticias/peru-cuenta-con-aproximadamente-10-milhectareas-de-tara-29803. [Google Scholar]
  4. Q. Jia and B. Zhao, “Design of Intelligent Peanut Red Coat Peeling Machine,” 2022 3rd International Conference on Intelligent Design (ICID), Xi'an, China, (2022), pp. 172-176, doi: 10.1109/ICID57362.2022.9969742. [Google Scholar]
  5. R. Donado, LH Tan, DM Fernandez, EJ Calilung, DA Francia and EP Dadios, “Design, fabrication and testing of a semi-auto green mango peeling machine”, 2015 International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment and Management (HNICEM), Cebu, Philippines, (2015), pp. 1-5, doi: 10.1109/HNICEM.2015.7393261. [Google Scholar]
  6. N. Oka and S. Katsura, “Development of Coffee Grinder with Servo Mechanism and Relationship Analysis between Processing Conditions and Particle Size,” 2019 IEEE 28th International Symposium on Industrial Electronics (ISIE), Vancouver, BC, Canada, (2019), pp. 23092314, doi: 10.1109/ISIE.2019.8781266. [Google Scholar]
  7. Zhang Xirui, Dong Youfu and Zhang Daolin, “Design and experiment of 4YQZ-3A combine harvester for corn,” 2011 International Conference on New Technology of Agricultural, Zibo, China, (2011), pp. 44-49, doi: 10.1109/ICAE.2011.5943745. [CrossRef] [Google Scholar]
  8. A. Armatmontree, W. San-Um and C. Keatmanee, “Design and Analysis of a Hammer Mill Machine in High-Efficacy Recycle Process,” 2018 International Conference and Utility Exhibition on Green Energy for Sustainable Development (ICUE), Phuket, Thailand, (2018), p. 1-6, doi: 10.23919/ICUE-GESD.2018.8635728. [Google Scholar]
  9. AA Borja, RMC Amongo, DC Suministro and JP Pabico, “A machine vision assisted mechatronic seed meter for precision planting of corn,” 2018 3rd International Conference on Control and Robotics Engineering (ICCRE), Nagoya, Japan, (2018), pp. 183-187, doi: 10.1109/ICCRE.2018.8376460. [Google Scholar]
  10. G. E. Rivera Cárdenas, V. Bonilla, M. Marcelo, G. Mosquera, and A. V. Litvin, “Dispositivo mecatrónico para el análisis y mitigación de movimientos involuntarios en personas con enfermedad de Parkinson,” Enfoque UTE, vol. 10, no. 1, pp. 153–172, (2019), doi: 10.29019/enfoqueute.v10n1.452. [CrossRef] [Google Scholar]
  11. Richard G. Budynas, & J. Keith Nisbett, “Shigley's Mechanical Engineering Design”, 9th ed, McGraw-Hill, New York (2011), pp. 359953, ISBN 978–0–07–352928–8. [Google Scholar]
  12. Vanegas Useche, L. V, “Design of Machine Elements”, Technological University of Pereira, 1st edition, Pereira (2018), pp. 331-334, ISBN: 978958-722-301-9. [Google Scholar]
  13. Catalog No. 6000 EN, Bearings, SKF Group, Sweden, Available in: https://0201.nccdn.net/1_2/000/000/166/f50/catalogo-general-skf.pdf. [Google Scholar]
  14. 8161CS–AVR–05/09, AtMega 328P, Atmel Corporation, San Jose, USA, Available in: https://www.mouser.com/pdfdocs/gravitech_atmega328_datasheet. [Google Scholar]
  15. P. Rengphatthanagit and P. Lakawathana, “Controlling Weight Loss of Volumetric Filling Machine: A Case Study of Coffee Mixed Powder,” 2021 6th International Conference on Business and Industrial Research (ICBIR), Bangkok, Thailand, (2021), pp. 81-86, doi: 10.1109/ICBIR52339.2021.9465834. [CrossRef] [Google Scholar]
  16. S. Zhang and J. Ruan, “On Control System Design of Mill with Pair Rollers Driven by Duo Motors”, 2018 2nd IEEE Advanced Information Management, Communications, Electronic and Automation Control Conference (IMCEC), Xi'an, China, 2018, p. 266-269, doi:10.1109/IMCEC.2018.8469270. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.