Open Access
Issue
E3S Web of Conf.
Volume 465, 2023
8th International Conference on Industrial, Mechanical, Electrical and Chemical Engineering (ICIMECE 2023)
Article Number 01008
Number of page(s) 4
Section Symposium on Mechanical, Chemical, and Advanced Materials Engineering
DOI https://doi.org/10.1051/e3sconf/202346501008
Published online 18 December 2023
  1. O. Akampumuza, P. M. Wambua, A. Ahmed, W. Li, and X.-H. Qin, “Review of the applications of biocomposites in the automotive industry,” Polym. Compos., vol. 38, no. 11, pp. 2553– 2569, doi: https://doi.org/10.1002/pc.23847, (2017). [CrossRef] [Google Scholar]
  2. S. Sakuri, D. Ariawan, and E. Surojo, “Mechanical properties of microcrystalline cellulose filled unsaturated polyester blend composite with various treatment,” AIP Conf. Proc., vol. 2097, no. April, doi: 10.1063/1.5098240, (2019), [Google Scholar]
  3. S. N. Ali and M. T. Arafat, “7 - Cellulose-based biocomposites,” in Woodhead Publishing Series in Biomaterials, M. E. Hoque, A. Sharif, and M. B. T.-G. B. for B. E. Jawaid, Eds. Woodhead Publishing, pp. 135–195. doi: https://doi.org/10.1016/B9780-12-821553-1.00017-X, (2021). [Google Scholar]
  4. M. M. Kabir, H. Wang, K. T. Lau, and F. Cardona, “Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview,” Compos. Part B Eng., vol. 43, no. null, p. 2883, (2012). [CrossRef] [Google Scholar]
  5. P. Madhu, M. R. Sanjay, M. Jawaid, S. Siengchin, A. Khan, and C. I. Pruncu, “A new study on effect of various chemical treatments on Agave Americana fiber for composite reinforcement: Physico-chemical, thermal, mechanical and morphological properties,” Polym. Test., vol. 85, p. 106437, doi: https://doi.org/10.1016/j.polymertesting.2020.1064 37 (2020). [CrossRef] [Google Scholar]
  6. T. Aziz et al., “Recent Progress in Silane Coupling Agent with Its Emerging Applications,” J. Polym. Environ., vol. 29, no. 11, pp. 3427–3443, doi: 10.1007/s10924-021-02142-1, (2021). [CrossRef] [Google Scholar]
  7. M. Mehdikhani, L. Gorbatikh, I. Verpoest, and S. V Lomov, “Voids in fiber-reinforced polymer composites: A review on their formation, characteristics, and effects on mechanical performance,” J. Compos. Mater., vol. 53, no. 12, pp. 1579–1669, doi: 10.1177/0021998318772152, (2018). [Google Scholar]
  8. M. Ghozali, D. Ariawan, and E. Surojo, “The Effect of Alkali Treatment And Microcrystalline Cellulose Addition on Density Value of Cantala Fiber Reinforced Unsaturated Polyester Composites,” Mek. Maj. Ilm. Mek., vol. 20, no. 1, p. 1, doi: 10.20961/mekanika.v20i1.47460, (2021). [Google Scholar]
  9. W. W. Raharjo, R. Salam, and D. Ariawan, “The Effect of Microcrystalline Cellulose on the Physical, Thermal, and Mechanical Properties of Composites Based on Cantala Fiber and Recycled High-Density Polyethylene,” J. Nat. Fibers, vol. 20, no. 2, p. 2204454, doi: 10.1080/15440478.2023.2204454, (2023). [CrossRef] [Google Scholar]
  10. A. Kiziltas, D. J. Gardner, Y. Han, and H. S. Yang, “Mechanical Properties of Microcrystalline Cellulose (MCC) Filled Engineering Thermoplastic Composites,” J. Polym. Environ., vol. 22, no. 3, pp. 365–372, doi: 10.1007/s10924-014-0676-5, (2014). [CrossRef] [Google Scholar]
  11. Y. Azeh, T. M. Umar, and M. D., “Chemical modification of microcrystalline cellulose: Improvement of barrier surface properties to enhance surface interactions with some synthetic polymers for biodegradable packaging material processing industry,” Adv Appl Sci Res, vol. 2, no. September 2017, pp. 532– 540, (2011). [Google Scholar]
  12. E. C. Ramires, J. D. Megiatto, A. Dufresne, and E. Frollini, “Cellulose Nanocrystals versus Microcrystalline Cellulose as Reinforcement of Lignopolyurethane Matrix,” Fibers, vol. 8, no. 4, doi: 10.3390/fib8040021 (2020). [CrossRef] [Google Scholar]
  13. M. H. Palmiyanto, E. Surojo, D. Ariawan, and F. Imaduddin, “Eglass/kenaf fibre reinforced thermoset composites fiiled with MCC and immersion in a different fluid,” Sci. Rep., vol. 12, no. 1, pp. 1– 18, doi: 10.1038/s41598-022-24506-w, (2022). [CrossRef] [Google Scholar]
  14. Q. F. Irawan, “PENGARUH SUHU TWIN SCREW EXTRUDER TERHADAP SIFAT MEKANIK DAN FISIK KOMPOSIT SERAT ECENG GONDOK-HDPE,” Universitas Sebelas Maret, (2023). [Google Scholar]
  15. M. M. Rehman, M. Zeeshan, K. Shaker, and Y. Nawab, “Effect of micro-crystalline cellulose particles on mechanical properties of alkaline treated jute fabric reinforced green epoxy composite,” Cellulose, vol. 26, no. 17, p. 9057, (2019). [CrossRef] [Google Scholar]
  16. D. Trache et al., “Microcrystalline cellulose: Isolation, characterization and bio-composites application-A review,” Int. J. Biol. Macromol., vol. 93, no. null, p. 789, (2016). [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.