Open Access
Issue
E3S Web of Conf.
Volume 465, 2023
8th International Conference on Industrial, Mechanical, Electrical and Chemical Engineering (ICIMECE 2023)
Article Number 02049
Number of page(s) 5
Section Symposium on Electrical, Information Technology, and Industrial Engineering
DOI https://doi.org/10.1051/e3sconf/202346502049
Published online 18 December 2023
  1. Aflahannisa and Astuti, “Sintesis Nanokomposit Karbon-TiO 2 Sebagai Anoda Baterai Lithium,” Jurnal Fisika Unand, vol. 5, no. 4, 2016. [Google Scholar]
  2. F. A. Perdana, “Baterai Lithium,” INKUIRI: Jurnal Pendidikan IPA, vol. 9, no. 2, p. 113, Apr. 2021, doi: 10.20961/inkuiri.v9i2.50082. [CrossRef] [Google Scholar]
  3. I. Farida Antika and S. Hidayat, “Karakteristik Anoda Baterai LithiumIon Yang Dibuat Dengan Metode Spraying Berbasis Binder CMC,” 2019. [Google Scholar]
  4. Rokhim M, “Karakteristik Dan Langkah Pembentukan Carbon Nanotube (CNT),” Indonesian Scholars Network, 2018. [Google Scholar]
  5. S. S. and M. S. Swapna, “Synthesis And Characterization Of Carbon Nanoparticles By Combustion Method,” 2018. [Google Scholar]
  6. M. Keidar, A. Shashurin, O. Volotskova, Y. Raitses, and I. I. Beilis, “Mechanism of carbon nanostructure synthesis in arc plasma,” in Physics of Plasmas, May 2010. doi: 10.1063/1.3312879. [Google Scholar]
  7. W. Krätschmer, Lowell D. LambK, K. Fostiropoulos, and Donald R. Huffman, “Solid C 60: a new form of carbon,” Nature, 1990. [Google Scholar]
  8. M. Anwar, T. E. Saraswati, and A. Bahrudin, “Submerged Electrical Arc Discharge for Nanoparticles Fabrication Using Carbon-Based Electrodes,” Materials Science Forum, vol. 939, pp. 141–146, 2018, doi:10.4028/www.scientific.net/MSF.939.141. [CrossRef] [Google Scholar]
  9. L. Anjarwati, M. Anwar, Y. Mahardhika, R. Fadhillah, C.H.B. Apribowo, T. E. Saraswati, Y., Ayub, current-voltage monitoring of plasma arc discharge submerged in water for nanoparticles fabrication, AIP Conf. Proc. 2217 (1) (2020) 030185-1–030185–5, https://doi.org/10.1063/5.0000978 [Google Scholar]
  10. Anwar, M., et al., Probing ionization characteristics of under-water plasma arc discharge using simultaneous current and voltage versus time measurement in carbon nanoparticle synthesis. Micro and Nano Engineering, 2022. 14: p. 100099. [CrossRef] [Google Scholar]
  11. X. Gang, J. Shen-li, and S. Zong-qian, “The production of carbon nanomaterials by arc discharge under water or liquid nitrogen,” 2007. [Google Scholar]
  12. N. Sano, H. Wang, M. Chhowalla, I. Alexandrou, and G. A. J. Amaratunga, “Synthesis of carbon’onions’ in water,” Nature, 2001. [Google Scholar]
  13. N. Sano, H. Wang, I. Alexandrou, M. Chhowalla, K. B. K. Teo, and G. A. J. Amaratunga, “Properties of carbon onions produced by an arc discharge in water,” Journal of Applied Physics, vol. 92, no. 5, pp. 2783–2788, Sep. 2002, doi:10.1063/1.1498884. [CrossRef] [Google Scholar]
  14. K Schulte, “Production of CNTs and Risks to Health,” in Carbon Nanotube Reinforced Composites: CNR Polymer Science and Technology, Elsevier Inc., 2015, pp. 103–123. doi:10.1016/B978-1-4557-3195-4.00004-7. [Google Scholar]
  15. V. Etacheri, R. Marom, R. Elazari, G. Salitra, and D. Aurbach, “Challenges in the development of advanced Li-ion batteries: a review,” Energy Environ Sci, vol. 4, no. 9, pp. 3243–3262, 2011, doi: 10.1039/C1EE01598B. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.