Open Access
Issue
E3S Web of Conf.
Volume 465, 2023
8th International Conference on Industrial, Mechanical, Electrical and Chemical Engineering (ICIMECE 2023)
Article Number 02052
Number of page(s) 7
Section Symposium on Electrical, Information Technology, and Industrial Engineering
DOI https://doi.org/10.1051/e3sconf/202346502052
Published online 18 December 2023
  1. R. Neugebauer, S. Hippmann, M. Leis, and M. Landherr, “Industrie 4.0 - From the Perspective of Applied Research,” Procedia CIRP, vol. 57, pp. 2– 7, 2016, doi: 10.1016/j.procir.2016.11.002. [CrossRef] [Google Scholar]
  2. A. Jandyal, I. Chaturvedi, I. Wazir, A. Raina, and M. I. Ul Haq, “3D printing – A review of processes, materials and applications in industry 4.0,” Sustainable Operations and Computers, vol. 3, no. October 2021, pp. 33–42, 2022, doi: 10.1016/j.susoc.2021.09.004. [CrossRef] [Google Scholar]
  3. Toyiban, “Produk kerajinan penyumbang PDB terbesar ketiga nasional,” https://www.antaranews.com/berita/1184280/produkkerajinan-penyumbang-pdb-terbesar-ketiga-nasional, Nov. 28, 2019. [Google Scholar]
  4. KEMENPERIN, “Menperin: Industri Kerajinan Berpotensi Sumbang Ekspor Besar,” https://www.kemenperin.go.id/artikel/19724/Menperin:-IndustriKerajinan-Berpotensi-Sumbang-Ekspor-Besar, Sep. 26, 2018. https://www.kemenperin.go.id/artikel/19724/Menperin:-IndustriKerajinan-Berpotensi-Sumbang-Ekspor-Besar (accessed Jan. 24, 2023). [Google Scholar]
  5. KOMINFO, “Pemerintah Dorong Optimalisasi Pertumbuhan Industri Kreatif Indonesia,” https://www.kominfo.go.id/content/detail/39347/pemerintah-dorongoptimalisasi-pertumbuhan-industri-kreatif-indonesia/0/berita, Jan. 14, 2022. https://www.kominfo.go.id/content/detail/39347/pemerintahdorong-optimalisasi-pertumbuhan-industri-kreatif-indonesia/0/berita (accessed Jan. 24, 2023). [Google Scholar]
  6. T. Spahiu, H. Almeida, A. Manavis, and P. Kyratsis, “Fashion products through digital manufacturing – A case study with FDM technology,” Academic Journal of Manufacturing Engineering, vol. 18, no. 4, pp. 63–72, 2020. [Google Scholar]
  7. C. Chang and S. Ko, “Comparative Study on the 3D Printing Methodology Suitable for Jewelry,” Journal of the Korea Convergence Society, vol. 11, no. 2, pp. 225–230, 2020, doi: 10.15207/JKCS.2020.11.2.225. [Google Scholar]
  8. A. D. Mazurchevici, D. Nedelcu, and R. Popa, “Additive manufacturing of composite materials by FDM technology: A review,” Indian Journal of Engineering and Materials Sciences, vol. 27, no. 2, pp. 179–192, 2020. [Google Scholar]
  9. T. Finnes and T. Letcher, “High Definition 3D Printing-Comparing SLA and FDM Printing Technologies,” 2015. [Online]. Available: http://openprairie.sdstate.edu/jurhttp://openprairie.sdstate.edu/jur/vol1 3/iss1/3HIGHDEFINITION3DPRINTING [Google Scholar]
  10. R. Ryan, “Perancangan dan Pembuatan Mesin CNC Milling Skala Laboratorium Untuk Produksi Pola Cetakan Perhiasan Cincin,” Universitas Andalas, Padang, 2016. [Google Scholar]
  11. D. T. Matt, E. Rauch, and P. Dallasega, “Trends towards distributed manufacturing systems and modern forms for their design,” in Procedia CIRP, Elsevier, 2015, pp. 185–190. doi: 10.1016/j.procir.2015.06.034. [CrossRef] [Google Scholar]
  12. Ana Maria Dian Ayu Sekarsari, “Metode Casting, Pembuatan Perhiasan dengan Teknik Cor,” https://kumparan.com/tugujogja/metode-casting-pembuatanperhiasan-dengan-teknik-cor-1sA6jAiPxWV/full, Oct. 31, 2019. [Google Scholar]
  13. M. Mukhtarkhanov, A. Perveen, and D. Talamona, “Application of stereolithography based 3D printing technology in investment casting,” Micromachines (Basel), vol. 11, no. 10, 2020, doi: 10.3390/mi11100946. [Google Scholar]
  14. Er. a S. Er. C. S. Sandhu, “Investigation of optimize wax oattern in the investment casting by using the different form of waxes,” IOSR Journal of Mechanical and Civil Engineering, vol. 3, no. 4, pp. 1–6, 2012. [CrossRef] [Google Scholar]
  15. A. S. Sabau and S. Viswanathan, “Material properties for predicting wax pattern dimensions in investment casting,” Materials Science and Engineering: A, vol. 362, no. 1–2, pp. 125–134, 2003, doi: 10.1016/S0921-5093(03)00569-0. [CrossRef] [Google Scholar]
  16. A. Bucio, R. Moreno‐tovar, L. Bucio, J. Espinosa‐ dávila, and F. Anguebes‐franceschi, “Characterization of beeswax, candelilla wax and paraffin wax for coating cheeses,” Coatings, vol. 11, no. 3, pp. 1– 18, 2021, doi:10.3390/coatings11030261. [Google Scholar]
  17. O. Bemblage and D. B. Karunakar, “A study on the blended wax patterns in investment casting process,” Proceedings of the World Congress on Engineering 2011, WCE 2011, vol. 1, no. December, pp. 721–727, 2011. [Google Scholar]
  18. V. Tagliaferri, F. Trovalusci, S. Guarino, and S. Venettacci, “Environmental and economic analysis of FDM, SLS and MJF additive manufacturing technologies,” Materials, vol. 12, no. 24, 2019, doi: 10.3390/ma1224161. [CrossRef] [PubMed] [Google Scholar]
  19. A. Kroma, O. Adamczak, R. Sika, F. Górski, W. Kuczko, and K. Grześkowiak, “Modern Reverse Engineering Methods Used to Modification of Jewelry,” Advances in Science and Technology Research Journal, vol. 14, no. 4, pp. 298–306, 2020, doi: 10.12913/22998624/128006. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.