Open Access
| Issue |
E3S Web of Conf.
Volume 469, 2023
The International Conference on Energy and Green Computing (ICEGC’2023)
|
|
|---|---|---|
| Article Number | 00018 | |
| Number of page(s) | 10 | |
| DOI | https://doi.org/10.1051/e3sconf/202346900018 | |
| Published online | 20 December 2023 | |
- C. Beji, A. Merabtine, S. Mokraoui, A. Kheiri, J. Kauffmann, and N. Bouaziz, ‘Experimental study on the effects of direct sun radiation on the dynamic thermal behavior of a floor-heating system’, Solar Energy, vol. 204, pp. 1–12, Jul. 2020, doi: 10.1016/j.solener.2020.04.055. [CrossRef] [Google Scholar]
- X. Yang, L. Pan, W. Guan, Z. Tian, J. Wang, and C. Zhang, ‘Optimization of the configuration and flexible operation of the pipe-embedded floor heating with low-temperature district heating’, Energy and Buildings, vol. 269, p. 112245, Aug. 2022, doi: 10.1016/j.enbuild.2022.112245. [CrossRef] [Google Scholar]
- G.-S. Song, ‘Buttock responses to contact with finishing materials over the ONDOL floor heating system in Korea’, Energy and Buildings, vol. 37, no. 1, pp. 65–75, Jan. 2005, doi: 10.1016/j.enbuild.2004.05.005. [CrossRef] [Google Scholar]
- S. Sattari and B. Farhanieh, ‘A parametric study on radiant floor heating system performance’, Renewable Energy, vol. 31, no. 10, pp. 1617–1626, Aug. 2006, doi: 10.1016/j.renene.2005.09.009. [CrossRef] [Google Scholar]
- Y. Liu, D. Wang, and J. Liu, ‘Study on heat transfer process for in-slab heating floor’, Building and Environment, vol. 54, pp. 77–85, Aug. 2012, doi: 10.1016/j.buildenv.2012.02.007. [CrossRef] [Google Scholar]
- X. Wu, J. Zhao, B. W. Olesen, L. Fang, and F. Wang, ‘A new simplified model to calculate surface temperature and heat transfer of radiant floor heating and cooling systems’, Energy and Buildings, vol. 105, pp. 285–293, Oct. 2015, doi: 10.1016/j.enbuild.2015.07.056. [CrossRef] [Google Scholar]
- S. Oubenmoh et al., ‘Some particular design considerations for optimum utilization of under floor heating systems’, Case Studies in Thermal Engineering, vol. 12, pp. 423– 432, Sep. 2018, doi: 10.1016/j.csite.2018.05.010. [CrossRef] [Google Scholar]
- A. Charraou, S. Oubenmoh, A. Mourid, R. Saadani, M. Rahmoune, and M. El Alami, ‘Experimental study and numerical simulation of a floor heating system in a three-dimensional model: parametric study and improvement’, Applied Thermal Engineering, p. 121151, Jul. 2023, doi: 10.1016/j.applthermaleng.2023.121151. [Google Scholar]
- ‘COMSOL - Software for Multiphysics Simulation’. Accessed: Oct. 09, 2023. [Online]. Available: https://www.comsol.com/ [Google Scholar]
- L. Zhang, X.-H. Liu, and Y. Jiang, ‘Simplified calculation for cooling/heating capacity, surface temperature distribution of radiant floor’, Energy and Buildings, vol. 55, pp. 397–404, Dec. 2012, doi: 10.1016/j.enbuild.2012.08.026. [CrossRef] [Google Scholar]
- H. B. Awbi, ‘Calculation of convective heat transfer coefficients of room surfaces for natural convection’, Energy and Buildings, vol. 28, no. 2, pp. 219–227, Oct. 1998, doi: 10.1016/S0378-7788(98)00022-X. [CrossRef] [Google Scholar]
- B. W. Olesen, ‘Radiant Floor Heating In Theory and Practice’, ASHRAE Journal, 2002. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.