Open Access
| Issue |
E3S Web Conf.
Volume 385, 2023
2023 8th International Symposium on Energy Science and Chemical Engineering (ISESCE 2023)
|
|
|---|---|---|
| Article Number | 03027 | |
| Number of page(s) | 6 | |
| Section | Thermochemical Engineering and Waste Treatment | |
| DOI | https://doi.org/10.1051/e3sconf/202338503027 | |
| Published online | 04 May 2023 | |
- Pu W., Gong X., Chen Y., et al. Oxidation kinetic evaluation of the low temperature oxidized products of Tahe heavy oil characterized by the distributed activation energy model [J]. Journal of Petroleum Science and Engineering, 2019, 181. [Google Scholar]
- Chen Y., Pu W., Liu X., et al. Specific kinetic triplet estimation of Tahe heavy oil oxidation reaction based on non-isothermal kinetic results [J]. Fuel, 2019, 242: 545–552. [CrossRef] [Google Scholar]
- Pu W., Gong X., Chen Y., et al. Non-isothermal pyrolysis and combustion kinetics of heavy oil and its low temperature oxidation products by thermal analyses [J]. Petroleum Science and Technology, 2019, 38(4): 398–404. [Google Scholar]
- Pu W., Zhao S., Hu L., et al. Thermal effect caused by low temperature oxidation of heavy crude oil and its in-situ combustion behavior [J]. Journal of Petroleum Science and Engineering, 2020, 184. [Google Scholar]
- Wang C., Liu H., Pang Z., et al. Enhance Oil Recovery for Steam Flooding: Low-Temperature Oxidative Decomposition of Heavy Oil with Air Injection [J]. Energy & Fuels, 2015, 29(10): 6242–6249. [CrossRef] [Google Scholar]
- Zhao S., Pu W., Varfolomeev M.A., et al. Oxidation characteristics of heavy oil and its SARA fractions during combustion using TG-FTIR [J]. Journal of Petroleum Science and Engineering, 2020, 192. [Google Scholar]
- Zhao S., Gao H., Pu W., et al. Isothermal oxidation behavior of heavy crude oil and its low-temperature oxidized oils: Implications for in-situ upgrading of heavy oil [J]. Fuel, 2022, 313. [Google Scholar]
- Pu W., Yuan C., Jin F., et al. Low-Temperature Oxidation and Characterization of Heavy Oil via Thermal Analysis [J]. Energy & Fuels, 2015, 29(2): 1151–1159. [CrossRef] [Google Scholar]
- Kök M.V., Varfolomeev M.A., Nurgaliev D.K. Thermal characterization of crude oils by pressurized differential scanning calorimeter (PDSC) [J]. Journal of Petroleum Science and Engineering, 2019, 177: 540–543. [CrossRef] [Google Scholar]
- Zhao S., Pu W., Pan J., et al. Thermo-oxidative characteristics and kinetics of light, heavy, and extraheavy crude oils using accelerating rate calorimetry [J]. Fuel, 2022, 312. [Google Scholar]
- Kök M.V., Varfolomeev M.A., Nurgaliev D.K. Crude oil characterization using TGA-DTA, TGA- FTIR and TGA-MS techniques [J]. Journal of Petroleum Science and Engineering, 2017, 154: 537–542. [CrossRef] [Google Scholar]
- Sadikov K., Yuan C., Mehrabi-Kalajahi S.S., et al. A New, Fast, and Efficient Method for Evaluating the Influence of Catalysts on In-Situ Combustion Process for Heavy Oil Recovery [Z]. SPE International Heavy Oil Conference and Exhibition. 2018: D032S43R01. 10.2118/193758-MS [Google Scholar]
- Yang M., Chai M., Yu X., et al. Insights into in-situ upgrading of bitumen in the hybrid of steam and combustion process: From experimental analysis aspects [J]. Journal of Petroleum Science and Engineering, 2022, 217. [Google Scholar]
- Hosseinpour M., Hajialirezaei A.H., Soltani M., et al. Thermodynamic analysis of insitu hydrogen from hot compressed water for heavy oil upgrading [J]. International Journal of Hydrogen Energy, 2019, 44(51): 27671–84. [CrossRef] [Google Scholar]
- Zhao S., Pu W., Varfolomeev M.A., et al. Evaluation of heat release caused by low-temperature oxidation of heavy oil and its SARA fractions under isothermal conditions [J]. Thermochimica Acta, 2020, 690. [Google Scholar]
- Tirado A., Yuan C., Varfolomeev M.A., et al. Kinetic modeling of aquathermolysis for upgrading of heavy oils [J]. Fuel, 2022, 310: 122286. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.