Open Access
| Issue |
E3S Web Conf.
Volume 391, 2023
4th International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED-ICMPC 2023)
|
|
|---|---|---|
| Article Number | 01054 | |
| Number of page(s) | 7 | |
| DOI | https://doi.org/10.1051/e3sconf/202339101054 | |
| Published online | 05 June 2023 | |
- A.K. Srivastava, A.R. Dixit, S. Tiwari, A review on the intensification of metal matrix composites and its nonconventional machining, Science and Engineering of composite materials 25 (2) (2016) [Google Scholar]
- A.K. Srivastava, Y. Gupta, S. Patel, S.K. Tiwari, S. Pandey, “Metal matrix composites- a review on synthesis and characterization”, IOP Conf. Series, Materials Science and Engineering 691 (2019) [Google Scholar]
- A.K. Srivastava, A. Nag, A.R. Dixit, J. Scucka, S. Hloch, D. Klichová, P. Hlavácěk, S. Tiwari, Akash Nag, Amit Rai Dixit, Jiri Scucka, Sergej Hloch, Dagmar Klichová, Petr Hlavácěk, Sandeep Tiwari, Hardness measurement of surfaces on hybrid metal matrix composite created by turning using an abrasive water jet and WED, Measurement 131 (2019) [Google Scholar]
- A.K.S. Ashish Kumar Srivastava, Statistical optimization of wire-edm during processing of hybrid MMC, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) 8 (6) (2018) [Google Scholar]
- A.K. Srivastava, N. Kumar, A.R. Dixit, Friction stir additive manufacturing - An innovative tool to enhance the mechanical and micro structural properties, in: Material science & engineering B, 2021 [Google Scholar]
- S. Kumar, A.K. Srivastava, R.K. Singh, Srivastava, Ashish, Kumar, Singh, Rakesh Kumar, Fabrication of AA7075 Hybrid Green Metal Matrix Composites by Friction Stir Processing Technique, Annales de Chimie - Science des Matériaux 44 (4) (2020) [Google Scholar]
- A.K. Srivastava, S.P. Dwivedi, N.K. Maurya, R. Sahu, Surface Roughness Report and 3D Surface Analysis of Hybrid Metal Matrix Composites (MMC)During Abrasive Water Jet (AWJ) Cutting, Revue des Composites et des Matériaux Avancés-Journal of Composite and Advanced Materials 30 (3-4) (2020) [Google Scholar]
- A.K. Srivastava, N.K. Maurya, A.R. Dixit, S.P. Dwivedi, A. Saxena, M. Maurya, Experimental investigations of A359/Si3N4 surface composite produced by multi-pass friction stir processing, Materials Chemistry and Physics 257 (2021) [Google Scholar]
- M. Nalbant, H. Gökkaya, I. Toktas, G. Sur, The experimental investigation of the effects of uncoated, PVD-and CVD-coated cemented carbide inserts and cutting parameters on surface roughness in CNC turning and its prediction using artificial neural networks, Robotics and Computer-Integrated Manufacturing 25 (1) (2009) [Google Scholar]
- Ashish Kumar Srivastava, Nagendra Kumar Maurya, Manish Maurya, Shashi Prakash Dwivedi, Ambuj Saxena, Effect of Multiple Passes on Microstructural and Mechanical Properties of Surface Composite Al 2024/SiC Produced by Friction Stir Processing, Annales de Chimie-Science des Matériaux, Volume 44, Issue 6, Pages 421-426. [Google Scholar]
- M.M. Benal, H.K. Shivanand, Influence of heat treatment on the coefficient of thermal expansion of Al (6061) based hybrid composites, Materials Science and Engineering: A 435–436 (2006) [Google Scholar]
- Srivastava, V. S., Srivastava, A. K., Nag A., Singh Sandeep, Patel R.V., Effect of Process Parameter on diametric deviation during CNC lathe turning of EN-31 Steel, Conference ICCEMME, GL BAJAJ Gr Noida, (ICCEMME-2017) [Google Scholar]
- M. Verma, S.K. Pradhan, Experimental and numerical investigations in CNC turning for different combinations of tool inserts and workpiece material, Materials Today: Proceedings. 27 (2020) [Google Scholar]
- Srivastava V. S., Khan Z.A., Siddique Arshad Noor, Tripathi Devesh, “Multi response optimization on CNC turning process Parameter using Taguchi and Grey Relational Analysis”, Indian journal of engineering & materials sciences, March -2016 [Google Scholar]
- M. Lakshmanan, J.S. Rajadurai, S. Rajakarunakaran, Machining studies of Al7075 in CNC turning using grey relational analysis, Materials Today: Proceedings. (2020) [Google Scholar]
- J. J, A.X. M, Optimization on machining parameters of aluminium alloy hybrid composite using carbide insert, Materials Research Express 6 (11) (2019) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.